LutBot

Forum Replies Created

Viewing 15 posts - 31 through 45 (of 480 total)
  • Author
    Posts
  • in reply to: 1.3.34 is AWESOME #22528
    LutBot
    LutBot
    Participant
    0

    For the tools I just went with the skysteel “relic” ones and only melded CP on the offhands.

    in reply to: 1.3.34 is AWESOME #22520
    LutBot
    LutBot
    Participant
    0

    All that is done. Still having problems maybe it is my gear or something else?

    Well gear is definely gonna influence your results, along with food/teas.

    in reply to: 1.3.34 is AWESOME #22518
    LutBot
    LutBot
    Participant
    1+

    So far using food and LVL 80 great gear, innovation with the 80*** recipes for skybuilders’ I am not getting the 4500 collectability that I should be. Should I put collect on even tho it isn’t needed? What am I doing wrong?

    Make sure hasty, manip, rapid synth, precise, prudent, and patient touch are all in your hotbars. You also need to tick manipulation on miqo, its a huge step needed for the expert synths.

    in reply to: 1.3.34 is AWESOME #22512
    LutBot
    LutBot
    Participant
    0

    Regarding to crafting, using the 4:1 ratio and Manip + inno yields great results. Only did a handful of synths to test it out (already have the pteratodon), and I think only one ended up with very low quality (think 4500 or so, barely enough to turn in), but the rest were great, with very high collect.

    Only issue I ran into is when I tried out Waste Not (I know miqo said it isnt recommended, but still wanted to try it), where it got stuck trying to solve for over 10 minutes (stopped keeping track after 10 minutesand Lol). My PC has a gen 8 i8700 CPU and 16GB ram

    • This reply was modified 4 years, 5 months ago by LutBot LutBot.
    in reply to: Shadowbringers 5.58 – Issues & Feedback #22491
    LutBot
    LutBot
    Participant
    0

    Yo i am so hype for the big crafting overhaul update soon.

    Will we get an option to use delineations in the crafting solver? Preferably with a setting of how many can be used per craft, 0-3. They’re pretty cheap to get and popping one before a byregot’s could up the success rate of difficult crafts, or maybe popping one on a Good condition could lead to an early finisher with Byregot’s.
    I heard (but haven’t tested) that they also work on expert crafts.

    They do yeah, but good luck on finishing early xD Basically you’ll only finish an expert synth early if you get lucky with A LOT of procs. Otherwise better get used to 50+ steps =)

    LutBot
    LutBot
    Participant
    0

    I followed your guide on here on how to use this scenario but it is not working for me. Instead of running it Unsynced solo, it tries to join Sohm Al using my Squadron. I’ve done everything the way it was supposed to be done but yet it won’t work, any suggestions? Thanks in advance!

    You have to make sure to not touch your mouse AT ALL while this is running, or the scenario WILL break. That’s probably what’s causing your issue (if as you’ve said, you’re doing everything as outlined).

    in reply to: Shadowbringers 5.58 – Issues & Feedback #22474
    LutBot
    LutBot
    Participant
    1+

    Hi, I was rebinding my keys, and I ran into these issues with the combat assist:
    “Uhoh. I don’t know where is key ‘0xA3’ for action ‘Hotbar 1, Slot 12′”
    “Uhoh. I don’t know where is key ‘0xA4’ for action ‘Hotbar 1, Slot 11′”

    Those are my Mouse 4 and Mouse 5 buttons respectively.

    Previously, I had them on Hotbar 3, Slot 12 and Hotbar 3, Slot 11 respectively, and the assist didn’t seem to have any problems with them. Is there a fix for this, or is it an issue that’s baked into the way Miqo processes and issues keyboard commands?

    Miqo cant use mouse commands. You’ll have to rebind those to a hotbar if you want miqo to use them.

    We are sorry, but in order to emulate mouse buttons we would have to seize mouse control and you would not be able to use it.

    However, please note that the game allows two different keybinds for each action.
    Please follow this solution:

    1. Assign any keyboard shortcut to Key Setting 1.
    2. Assign (M3) or (M4) shortcut to Key Setting 2.

    This way, Miqobot will be able to activate actions via keyboard while you can continue using mouse button shortcuts.

    • This reply was modified 4 years, 6 months ago by LutBot LutBot.
    in reply to: (Phase 2) Diadem Full #22472
    LutBot
    LutBot
    Participant
    1+

    Hello.I’m sorry if you feel awkward speaking because I’m using a translator
    I used it for the first time yesterday. I use Miner
    There is nothing wrong with gathering, but if you move two or three islands, the character stops. Miqobot is still working.
    Also, there is no error message.

    (12:45:42) Hitting that poor node. :3
    (12:45:50) Hitting that poor node. :3
    (12:45:54) My precious shiny sparkles! (45/999)
    (12:45:54) Scanning for shiny gathering nodes like ‘<anything>’ *.*

    If you move manually, it suddenly moves again automatically. Can I know what the problem is? I’d appreciate your help.

    You need to enable compass in the gathering tab. Miqo uses game actions, and if she can’t see where the next node is (via compass) then shen won’t be able to move towards it.

    LutBot
    LutBot
    Participant
    0

    When I use this program to make a scenario for gathering/crafting a certain recipe, it never works for me because Miqobot is unable to change classes and gives me an error. I’m not sure what I’m doing wrong, but all I get in the chatbox in Miqobot is something that says “Uhoh. There’s no key bound to action ‘Switch to Hotbar 7′” repeatedly, then it says “Sorry, can’t changejob() – TIME OVER! (10 sec)” along with “ERROR (Chapter 2, Line 9): Execution error”

    I will attach the scenario it made for me as well so you guys can take a look if you want.

    I really appreciate the help and feedback, I’m looking forward to hearing back soon. 🙂

    She’s literally telling you why the scenario isnt working. You mustave switched the default keybinds, and as such, need to edit them again to work with miqo. She doesnt have a way to switch to your Hotbar 7, which is where I assume is where you have the job she needs to execute her current task. Look under system > keybinds > hotbars and make sure there’s a shortcut assigned to H7.

    in reply to: LVL 71-80 Gatherer Collectible Scenario #22436
    LutBot
    LutBot
    Participant
    0

    Thanks for this. Noob question: does miqobot auto turns in the collectibles or do I have to manually turn in? What if I leave the bot on and it filled my inventory?

    the collect action is usually built in the rotation, so she does it automatically. If your inventory fills, and you’re in a node, you’ll just get an error message and get stuck in the node, even if the time runs out she’ll still try to collect, which can seem fishy/suspicious. If she isnt trying to collect an item then she’ll just stay still and eventually turn the afk icon on.

    in reply to: Il Mheg Truegold Grid #22432
    LutBot
    LutBot
    Participant
    0

    Sorry newbie here, how do I use this grid? Do i import into Scenario or import under gathering tab?

    Doesnt matter where you import it from, it’ll show up where its supposed to. This is a grid, so it’ll be under the grid section and not in a scenario.

    in reply to: not moving in Diadem #22422
    LutBot
    LutBot
    Participant
    0

    Theres a problem with the navigation grid you use. If you post a link to the source i can take a look.

    The grid I’m using is the default Diadem grid that comes with Miqobot.

    That.. thats a VERY old grid, delete it and get one of the new ones. Diadem has been reworked since that grid first came out, and EVERYTHING in there is different.

    in reply to: Miqobot won't sit while fishing #22402
    LutBot
    LutBot
    Participant
    1+

    No, is that why it’s not working?

    Every action miqo takes simulates what a player would normally do. So, if you want her to perform an action, you need to make sure said action is in your hotbars.

    in reply to: [Request] Tank Mount Farming #22389
    LutBot
    LutBot
    Participant
    0

    I mean, you can always spam Holminister. It isnt optimal, but its all there is atm (with miqo)

    Achievement count with Trusts was removed with patch 5.1, if I’m reading this correctly, so you can’t go that route.

    https://na.finalfantasyxiv.com/lodestone/topics/detail/3a23a8ba13b2c4152681ec4fa5716915b851002f

    > The following issues have been addressed.

    > An issue wherein completing an instanced dungeon with Trusts as a tank job counted towards certain achievements.

    Oh wow, that sucks!! If only miqo supported shushui or siren sea, we could run those unsync’d Q_Q Tho siren sea takes like 20 minutes to clear solo on tank xD

    in reply to: Leveling using combat 1-80 (new) #22375
    LutBot
    LutBot
    Participant
    1+

    Great idea LutBot!
    Just ran through twice with fullClear(on): and twice with fullClear(off):
    The sample size, although small, indicates the minimum I would get per hour is 50k, maximum being 80k.
    Thank you for this idea!

    No worries! THere’s a scenario floating around, that runs sohm al an X amount of times and then turns in/buys cordials/ventures, but that can be edited to fit w/e you want to buy. Check the scenarios thread to find the one for your GC.

Viewing 15 posts - 31 through 45 (of 480 total)