[SCENARIO] Maelstron GC Venture/Cordial farm for dummies(me)

Forum Forums Grids and Presets [SCENARIO] Maelstron GC Venture/Cordial farm for dummies(me)

This topic contains 18 replies, has 8 voices, and was last updated by  YoToDoShi 2 years, 1 month ago.

Viewing 4 posts - 16 through 19 (of 19 total)
  • Author
    Posts
  • #22488
    LutBot
    LutBot
    Participant
    0

    I followed your guide on here on how to use this scenario but it is not working for me. Instead of running it Unsynced solo, it tries to join Sohm Al using my Squadron. I’ve done everything the way it was supposed to be done but yet it won’t work, any suggestions? Thanks in advance!

    You have to make sure to not touch your mouse AT ALL while this is running, or the scenario WILL break. That’s probably what’s causing your issue (if as you’ve said, you’re doing everything as outlined).

    #24491

    blackanof
    Participant
    0

    endorsing Sekx here, i cant running unsync solo

    #32834
    Steel Limit
    Steel Limit
    Participant
    1+

    For anyone looking at this in the future and see it not working, this is what I did to make it work. I’m using the latest scenario from September 23, 2019, and for this fix you this you need to change Chapter 2

    Additional Pre-requisites before you start are that
    1. You have pre-selected Sohm Al in the Dungeons Tab
    2. Go back to the Duty Roulette tab so that when MiqoBot opens it again, it uses that tab.

    Keep in mind that I can see Mentor Roulette, but not Expert, so add or remove key(num2, .3) //move down as necessary for you.

    waypoint(2)
    grid(Maelstrom GC Farm)
    
    key(u, 3) //duty finder
    
    key(num6, .2) //wake up cursor
    key(num2, .3) //move down #1
    key(num2, .3) //move down #2
    key(num2, .3) //move down #3
    key(num2, .3) //move down #4
    key(num2, .3) //move down #5
    key(num2, .3) //move down #6
    key(num2, .3) //move down #7
    key(num2, .3) //move down #8
    key(num2, .3) //move down #9
    key(num2, .3) //move down #10
    key(num6, .3) //move right
    key(num0, .3) //select join
    
    key(num4, .3) //move left
    key(num0, 4) //confirm
    
    squadron(1)
    deliverGCGear()
    repeatChapter(8)

    MAKE SURE YOU’RE NOT MOVING YOUR MOUSE WHEN IT IS DOING THIS PART!

    If someone can make this more efficient, that would be most appreciated. It feels like spamming move down is inefficient/wrong.

    • This reply was modified 2 years, 6 months ago by Steel Limit Steel Limit.
    • This reply was modified 2 years, 6 months ago by Steel Limit Steel Limit.
    • This reply was modified 2 years, 6 months ago by Steel Limit Steel Limit.
    • This reply was modified 2 years, 6 months ago by Steel Limit Steel Limit.
    • This reply was modified 2 years, 6 months ago by Steel Limit Steel Limit.
    #36447

    YoToDoShi
    Participant
    0

    For anyone looking at this in the future and see it not working, this is what I did to make it work. I’m using the latest scenario from September 23, 2019, and for this fix you this you need to change Chapter 2

    Additional Pre-requisites before you start are that
    1. You have pre-selected Sohm Al in the Dungeons Tab
    2. Go back to the Duty Roulette tab so that when MiqoBot opens it again, it uses that tab.

    Keep in mind that I can see Mentor Roulette, but not Expert, so add or remove key(num2, .3) //move down as necessary for you.

    waypoint(2)
    grid(Maelstrom GC Farm)
    
    key(u, 3) //duty finder
    
    key(num6, .2) //wake up cursor
    key(num2, .3) //move down #1
    key(num2, .3) //move down #2
    key(num2, .3) //move down #3
    key(num2, .3) //move down #4
    key(num2, .3) //move down #5
    key(num2, .3) //move down #6
    key(num2, .3) //move down #7
    key(num2, .3) //move down #8
    key(num2, .3) //move down #9
    key(num2, .3) //move down #10
    key(num6, .3) //move right
    key(num0, .3) //select join
    
    key(num4, .3) //move left
    key(num0, 4) //confirm
    
    squadron(1)
    deliverGCGear()
    repeatChapter(8)

    MAKE SURE YOU’RE NOT MOVING YOUR MOUSE WHEN IT IS DOING THIS PART!

    If someone can make this more efficient, that would be most appreciated. It feels like spamming move down is inefficient/wrong.

    Thank you!!!! This worked!

Viewing 4 posts - 16 through 19 (of 19 total)

You must be logged in to reply to this topic.