[AndylynynParticipant]

Miqobot wrote:

While we could implement these rules, it would be too risky to include them in a default rotation algorithm.
These adjustments will require new tools for precise rotation customization, which are planned in a separate development cycle. Other features have higher priority at the moment, but if the majority of users request similar adjustments, then of course we will implement them sooner.
Thank you for your request.

This is all I would really ask, I’m happy to wait for these optimizations and knowing the team already knows of this being a thing.
Thank you for the support.

[AndylynynParticipant]

Personally, I also wouldn’t mind have a “force single weave” as while playing WHM every single time it tries to weave out of Dia or any of the two lilies, it’s going to clip and sometimes it wants to double weave between Glares, which is just nuts and leads to 6seconds of GCD rolling dropped for no reason.

I would say, either add an option to limit weaving to one oGCD, or to have conditions for only weaving on WHM while using instacasts that allow you to effectively heal. Let’s say the bot really feels like now’s the appropriate time for Asylum or Lucid Dreaming (or as it sometimes happens to me, both at the same time), have it think upon the Dia counter, would it be more effective to early refresh Dia so you can weave those two in perfectly? Would it be okay to spend one Lily to create a weaving instance? (If you have two lilies this is acceptable imo)

Stuff like this could really REALLY help WHM’s case in weaving, in my opinion.

[AndylynynParticipant]

darkpokemon wrote:

I must be incredibly dumb (I struggle finding how to work this thing as is) but I can’t find that option anywhere :/

Personally love it on the End key but you can type in whatever you want (including combo keys) – Also personal suggestion, have the “Show Pause Status” box ticked so you can always tell if you’re combat assist on or off ingame.

[AndylynynParticipant]

Miqobot wrote:

Yes, we can consider this adjustment, but we need a more reliable condition.
For example, if you are close enough to 3-4 players, but the rest of the party is not in the range and on the verge of dying, should Miqobot use Cure III anyway? Since they are not healed by Cure III, Miqobot will have to use another AoE heal after this and the effect of Cure III will be wasted.

Perhaps prioritize getting one Cure III off on the immediate people around you and Medica II after the fact? Chances are, if you’re playing 8-people content, you’ll have a second healer also topping people off, Cure III is an amazing tool for the off-chance you’re all packed together (E10S comes to mind on several occasions), but it is situational. But an AoE cure potency of 550, is always a step up from Medica’s 200 potency.

I’ll leave this here to get some more opinions from the rest of the people though, of course.

EDIT – If only 1-2 people are not caught in the Cure III radius, you could individually pop some oGCD healing as well on the targets that didn’t miss it, being efficient and not losing GCD windows for the trade off.

• This reply was modified 3 years, 9 months ago by  Andylynyn.

[AndylynynParticipant]

Here’s a combat assist WHM question:

Would it be possible to prioritize Cure III if people are sufficiently packed together instead of Medica II? There are many cases when I am close enough to 3-4 other players and the bot will choose medica II when Cure III would’ve been a bit more efficient.

• This reply was modified 3 years, 9 months ago by  Andylynyn.

[AndylynynParticipant]

Miqobot wrote:

We are sorry, but these two requests contradict each other.
If we remove the condition that prevents using Embolden on cooldown but add another one that blocks Embolden, then we are back to where we started.

In addition, synergy rules fall outside of the basic rotation logic and may cause problems under certain conditions.
For example, if a Dancer never activates Technical Step, should Miqobot wait indefinitely as well?

Would it be viable to add a check to see if there was a Dancer in the party, and have an “if / else” clause for having a Dancer parameters for the rotation logic, and one without based on that?

I know it’s probably a stretch and very “in the long run” kind of thing, but it would be adaptable to a lot of other jobs as well. But it would be an inordinate amount of work.

[AndylynynParticipant]

uwu wrote:

use asylum as a <tt> macro and put on hotbar. Ill will just place it on the bosses target

This will not work on most savages however, as tanks will usually be away from the rest of the party, placing asylum around the tank is not optimal, around the boss is usually the best idea, as it’ll encase almost everyone.

Here’s the macro I use that seems to work fine:

/micon "Asylum"
/targetenemy
/ac "Asylum" <t>

( /targetenemy forces the bot to target the closest enemy to drop asylum on regardless of what it’s doing )

PS – I tried editing the previous post but I couldn’t so I had to double post.

• This reply was modified 3 years, 9 months ago by  Andylynyn.

[AndylynynParticipant]

BRD works great for me, but the bot currently doesn’t like lv80 skill.
However the bot never locks you into what it’s doing, so if you know you should be using another skill on that particular GCD, just spam it to use that instead of whatever the bot wants to do.

BLM sounds a bit trickier because of the cast times, like most casters. It is a job that depends a lot on situations and swiftcast usage and whatnot. Not sure if the bot will perform tip top.

[AndylynynParticipant]

If you don’t auto target it, it will go into placement mode.

The bot will then ignore placement mode and proceed with the rotation.

If you as in an “ac “Asylum” <t>” macro, it’ll place the Asylum aoe on your target immediately and allow the rotation to continue.

[AndylynynParticipant]

If you put Asylum on a Macro for <t> the bot will use it on CD 😉

[AndylynynParticipant]

MacFatts wrote:

Okay, I am a little confused. I thought it was said that collectibles would be fixed within a few or several weeks after the change? It’s been how long now, and we’re still not seeing this capability? It just seems that we get a lot of promises, and many of them just don’t come through, and now the Miqobot team is on vacation? So, we’re still paying for this bot, and there’s no development being made on it? I saw a post from back in 2016 that said that Miqobot would be implementing a whole questing automation, where it would do all MSQ and sidequests from lvl 1-70, but… where is that?

What do you mean no development? They literally came out of vacation to make the bot ready for 5.45 on day one.

The roadmap is in the forums, you don’t read it because you don’t want to. They’ve added quite a few things, and can you imagine the development on a bot that works completely without barely touching the game’s memory, and actually through raw input, taking a long time?

Just imagine. Yes, you pay, just like me. But we’re very much no “entitled” to it.

[AndylynynParticipant]

To pick up on the person above me:

We all appreciate the work you put into these, but we’ll all still be here waiting for new stuff.

Take a break if you want/need to, my guy.

[AndylynynParticipant]

If you have blind positionals on, the Miqo will try to move your character to the positional’s area by itself, but it won’t count for obstacles.

Mostly? It won’t matter you’ll get your positionals just make sure you’re not touching WASD when the next skill in the rotation requires a positional.

Edit: If you have True North on your bar, Miqo will also use that on CD to negate the need for the positional entirely so if sometimes you don’t move, usually means True North is up.

• This reply was modified 3 years, 9 months ago by  Andylynyn.

[AndylynynParticipant]

Alric wrote:

oh yeah I can log in using authohotkey, problem is I wanted to run a scenario were it swap characters and do retainers, I tried before and is too unreliable, with miqo I can send retainers while I sleep over and over in one character I tried on autohotkey and it breaks 100% of the time no matter if I make the macro super slow.

Use both at the same time and have Miqo handle ingame actions, while AHK handles the login screen? Coordinate so they sync up timewise? (Use Miqo’s wait command in a scenario for example)

[AndylynynParticipant]

r51093 wrote:

gri wrote:

Hi! Thank you for the scrip/scenario! I am very new to this and I am having a hard figuring out how to set the bot to gather only the items in slot #4, is that possible? Thank you!

yes it is possible first you have to remove the names from the gathering preset for both Botanist 🌱 and Mining ⚒

here is directions on how to modify the gathering presets you must do the same thing for both the Botanist 🌱 and Mining ⚒ gathering preset
Step.1

Erase any names in the the list that you dont want to gather by clicking on it to highlight it then del or backspace till it’s gone then you just have to click off of it
Step.3

in the orange box with yellow text set the number slot you want to be farmed
step.4

when you change the slot # or anything in the gather presets you have to click “overwrite” when you click “overwrite” a popup window will “popup” asking if you want to overwrite the preset you have to click yes on the popup window or it will not save

Note: the screen shot will show you what i mean by the popup window and what you have to click on to save it

Step.5

Note: Slot#1 when gathering starts at the top of the gathering list like below

Note: Miqobot will always look for a name on the list before going to the slots i recommend keeping the names of the items from the special weather nodes as they are always slot#1 and miqobot can get stuck trying to hit an empty slot, thies pitcures were intended to show people how to modify and add items to the list i left this out as it did not pertain to your question but incase you dont know how to copy an item name and copy it here is how below
Step.2

make sure you are not copying the “Approved” items Miqobot is picky about names XD none of the items in the gathering nodes are “Approved” untill it go’s through the “Inspector” in “The Firmament”

If you need to change which slot to aim for, follow these steps.

[Author]

Posts