[iifetapParticipant]

LakittyLa wrote:

Wow super nice of u

Is it possible to do
Push key instead of macro? When I use miqo
I find it goes much faster when miqo presses the buttons in game

How would I approach that line? Thanks in advance

That’s exactly what using “craftMacro(Name)” does. You create your crafting macro under the crafting tab
https://imgur.com/KRIptqA

• This reply was modified 4 years ago by  iifetap.

[iifetapParticipant]

As far as I know you’re going to have to switch the tools yourself. What I did was go through each of my jobs and made the new tool part of the job by equipping and then updating the gear-set. The Craft 20 section is going to take about 1h20m, and the craft 30 is going to take about 3hrs15min. I suggest breaking the 20/30 into two different scenarios so you can turn in the 20s, get new tools, make them your new gearset, and then start the 30s. For the macros, I used these two :https://ffxivteamcraft.com/simulator/29651/33767/oxOvZCmvgT8Wx5ic0kZW (normal tools)
https://ffxivteamcraft.com/simulator/29659/33775/kI12idkGxh5UChfDwnjj (+1)

You’re going to have to map out your own macros and ensure they are correct before going afk. I also suggest clicking the repair box in the crafting setting and repair after every 50 or so crafts.

craftMacro(ENTER YOUR CRAFT MACRO HERE)

job(ALC)
recipe(Oddly Specific Synthetic Resin)
craft(20)
job(ARM)
recipe(Oddly Specific Wire)
craft(20)
job(BSM)
recipe(Oddly Specific Rivets)
craft(20)
job(CRP)
recipe(Oddly Specific Petrified Orb)
craft(20)
job(CUL)
recipe(Oddly Specific Seed Extract)
craft(20)
job(GSM)
recipe(Oddly Specific Whetstone)
craft(20)
job(LTW)
recipe(Oddly Specific Leather)
craft(20)
job(WVR)
recipe(Oddly Specific Moonbeam Silk)
craft(20)

craftMacro(ENTER YOUR CRAFT MACRO HERE)

job(ALC)
recipe(Oddly Specific Glass)
craft(30)
job(ARM)
recipe(Oddly Specific Chainmail Sheet)
craft(30)
job(BSM)
recipe(Oddly Specific Fitting)
craft(30)
job(CRP)
recipe(Oddly Specific Shaft)
craft(30)
job(CUL)
recipe(Oddly Specific Seed Flour)
craft(30)
job(GSM)
recipe(Oddly Specific Gemstone)
craft(30)
job(LTW)
recipe(Oddly Specific Vellum)
craft(30)
job(WVR)
recipe(Oddly Specific Velvet)
craft(30)

Edit: Make sure you have the required control/craftsmanship to use the macros, I’m just going to assume you have the most recent gear and properly melded, if not, you might have to make your own rotation.

• This reply was modified 4 years ago by  iifetap.

[iifetapParticipant]

Just use Macros.
https://ffxivteamcraft.com/simulator/29651/33767/oxOvZCmvgT8Wx5ic0kZW
https://ffxivteamcraft.com/simulator/29659/33775/kI12idkGxh5UChfDwnjj

[iifetapParticipant]

Have you even looked or did you go straight to posting? There are like 20 threads on this topic on the front page of these forums.

[iifetapParticipant]

It’s in the Scenario Index thread.

Ifrit normal unsynced scenario

[iifetapParticipant]

LakittyLa wrote:

What buttons do i need to set under Collectors glove (hotkey 2, 9, 2) ?

hi-cordial (hotkey 1, 3, 2) what does that mean cloud :3

It probably says something like sendIcon(1,3,2)? Its specifying which button to press. Hotbar 1, Button 3, and pause 2 seconds.

[iifetapParticipant]

Relecade wrote:

DT Rotation uses no skills unless the node is +2 gathering attempts or more,

Wait, when was this feature added to Miqo? I don’t see anywhere in the bot that allows you to set parameters on special condition nodes?

• This reply was modified 4 years ago by  iifetap.

[iifetapParticipant]

Miqobot wrote:

No, there is no ETA.
It’s a very complex system so it’s impossible to provide any kind of reliable estimate.
We have already reached the point where the cost of every additional improvement grows exponentially. But we will continue working on them while there is enough demand.

Thank you. I’m very interested in the expansion of the combat system, hopefully there are enough other people to meet the demand.

[iifetapParticipant]

Miqobot wrote:

Yes, precise rotation customization will be implemented when we start working on endgame and raiding support.
It’s not as easy as a simple weight change, so it will take time.

Any idea of an ETA for when this will be released?

• This reply was modified 4 years, 1 month ago by  iifetap.

[iifetapParticipant]

iNight wrote:

I’m not doing savage but in my opinion Samurai has pretty decent DPS for melee. Not sure if it’s optimal but I’m using macro to put Shoha into Hakaze just because I want Miqo to use it without manual input. I still need to manually use Tsubame-gaeshi though.

If you don’t mind me asking, what’s the dps on a target dummy and with what iLevel?

[iifetapParticipant]

Does anybody use Samurai in savage content? I’m really starting to like the class and wondering how it does at level 80 with assist.

[iifetapParticipant]

I havn’t downloaded this yet but is it possible (or has anyone already done it?) for it to create an entire levekit by itself?

[iifetapParticipant]

uwu wrote:

SMN is one notch below only because it might waste a Phoenix or Bahamut when mob is close to death. Other than that it works amazing

You mind sending me a picture of what your hotbars are like for Summoner?

[iifetapParticipant]

mundays wrote:

how would a MCH hold up against a SMN in savage content with combat assist? or even SAM?

I can highly recommend MCH, as uwu pointed out, you don’t have to do ANYTHING other than move around. The ONLY thing you have to do is use tactician when required to help mitigate raid damage, and Queen Overdrive when you know a boss is going to disappear before the robot timer is up. As far as DPS, I’m sitting at around 15k in e6s with HQ 480 and 2 peices of 490 gear.

[iifetapParticipant]

Thank you, I think I’m going to mess around with summoner now.

[Author]

Posts