[DripyParticipant]

i’ll look into it

[DripyParticipant]

To start the loop I would do as Soviras suggested and make sure you have the compass option turned on. Also try to place waypoint() near the beginning of your scenario and put the point that is closest to the first set of nodes. That should fix your issues if your grid is setup properly. I also recommend uploading it so we can take a look at it.

[DripyParticipant]

sure its @nekro scenario and its made me millions here it is

[DripyParticipant]

YoToDoShi wrote:

Radbean wrote:

m the 24th while replying almost daily before that… There’s a chance that it is indeed related to the

@RadBean How did you make 3 billion gil???? I have a hard time making 1 mill because of the shit market crashing constantly on everything

he more then likely made it over time. Also how are having issues making over 1 mil? You can easily run the EW legendary node scenario and make 2-3mil a day from extracting materia and selling the legendary node mats. I’ve checked the mats for all DC in the NA and the prices aren’t tanked at all. Unless your in another region DC I find it hard not to make at least 2 mil a day.

• This reply was modified 2 years, 9 months ago by  Dripy.

[DripyParticipant]

soviras wrote:

Arc wrote:

As far as I’m aware the Miqobot dev team is from the USA. Could be wrong though. At least they work under US jurisdiction.

The website server is in the US, as is the server Miqo communicates to. The owner of the domain lives in Ukraine, unless they paid someone to be the registrant, that places them in Ukraine. They are under US jurisdiction because the servers operate there, and thus US laws apply to it.
Chances are they are hiding somewhere safe, but things do point towards them being in Ukraine.

yea it places them in Vinnytsia Oblast, Ukraine. Not to sure if that’s close/far away from Kyiv or if that city is a hot zone, but I pray they’re safe

• This reply was modified 2 years, 9 months ago by  Dripy.

[DripyParticipant]

I’m currently not home to test it but what you can probably do is set your crafting log action to a hot key (ex f7) then in the crafting scenario right after your craft() command you can add key(f7) below it. Long shot but it may work

• This reply was modified 2 years, 9 months ago by  Dripy.

[DripyParticipant]

I really wish there wasn’t a timer limit for the edit post option so that I don’t flood my own post… Anyways, if anyone wants to know the mats gathered I have them listed here

[DripyParticipant]

I had a similar issue and to fix it I had remove the delay timer (you have it set to 2 sec) and on top of that I had to move the cursor to the left (num4) every time I confirmed yes and the window behind it was activated again. Before those changes I had almost the exact same issue and my work around managed to fix it. In the example below you can see when I made the cursor move to the left because I labeled it “wake cursor”.

//Competence Materia X
waypoint(12)

key(f12)  //Scrip Exchange Focus

key(num0) //confirm
key(num4) //wake cursor
key(num0) //confirm

key(num4) //wake cursor
key(num8) //up
key(num0) //confirm

key(num4) //wake cursor
key(num2) //down
key(num0) //confirm

key(num2) //down
key(num4) //wake cursor
key(num0) //confirm
key(num2) //down
key(num2) //down
key(num0) //confirm
key(num2) //down
key(num0) //confirm
key(num4) //Select Yes
key(num0) // confirm
key({esc})

//Command Materia X
key(f12)  //Scrip Exchange Focus

key(num0) //confirm
key(num4) //wake cursor
key(num0) //confirm

Also another thing you can try to do, is run a fresh copy of miqobot with only your scenario preset loaded. Hope that helps!

• This reply was modified 2 years, 9 months ago by  Dripy.

[DripyParticipant]

I’m currently using the 560 craft gear and its pentamelded. It is possible to still get HQ without it but your going to have to visit Teamcraft site to help figure out what you need if your having trouble or just play around and adjust the macros accordingly. I am currently using the materia listed in the High Tier Meld Set section of that site if you wan to know exactly what I’m wearing.

for macro creating you can reference this site also to help create macros based on different stats.

• This reply was modified 2 years, 9 months ago by  Dripy.

[DripyParticipant]

accidentally deleted job(MIN) for the first scenario when fixing the last update. It is added now

Attachments:

You must be logged in to view attached files.

[DripyParticipant]

I made a few minor adjustments to the Scenario

• This reply was modified 2 years, 9 months ago by  Dripy.

[DripyParticipant]

Lyfox wrote:

Sure it works.
But the crafting solver in Miqo doesnt. You have to wait until its fixed: https://miqobot.com/forum/forums/topic/endwalker-6-0-miqobot-status/#post-33929

thanks for the quick reply. could I justreplace the solver with just custom macros?

[DripyParticipant]

ashathe wrote:

Is this working for endwalker?

?

[DripyParticipant]

does this still exist? can’t find the script

[DripyParticipant]

Works like a champ, thanks!

[Author]

Posts