Miqobot v1.3.32 – Patch Notes
- New mounts (8) are supported.
- Ocean Fishing location is supported.
- New bait (4) and new fish (113) is supported by Scenario Engine.
Combat
- (Lv71) Holminster Switch support.
In order to use Miqobot in Trust Dungeons, please put a Trust icon somewhere on your hotbar. You can drag it directly from the Duty menu. Alternatively, you can assign a shortcut for Trust in your keybinds.
Additional information is available in the main beta thread: [Beta] Combat
- A separate setting to open coffers is implemented.
If you’re not interested in any dungeon loot, you can disable this setting.
- A corresponding scenario function is implemented:
setSquadronOpenCoffers()
New abilities are supported:
- (Tanks) Reprisal.
- (NIN) Ten Chi Jin.
- (AST) Celestial Opposition.
- (AST) Cards management (Draw / Play / Redraw / Divination / Minor Arcana / Sleeve Draw).
- (MCH) Bioblaster.
- (SMN) Firebird Trance.
- (SMN) Fountain of Fire / Brand of Purgatory / Enkindle Phoenix.
Adjustments:
- (SCH) Emergency Tactics priority is increased.
- (SAM) True North is not activated when below level 52.
- (SMN) Egi Assault charges are triggered earlier for better Trance alignment.
- Fixed an issue wherein Assist Mode settings would not save if Pause Hotkey is not set.
Crafting Solver
We have managed to implement a bandage hotfix for the basic logic, but it’s extremely unstable.
Veneration is not supported.
Please do not attempt to craft any expensive recipes with this version.
During the next few weeks we will focus on the necessary upgrades for Crafting Solver and will try to make it compatible with 80+ content.
does anyone have a grid or scenario for fishing maneater clams thats willing to share? Would be greatly appreciated ^_^
Hello All,
I noticed there was already one for Ageflow, but I figured I’d add mine in as well. I modified grids that come with a fresh install of the Miqobot, but I renamed them so there shouldn’t be any DEBUG issues. I also made 2 different fishing presets, one for the Predator and one for the Lemonfish. Why Lemonfish you ask? It’s for a Leve turn-in so you can either use them/sell them/give them to your friends. That and needed another fishing spot so the fishies won’t sense something amiss!
OK! What it does –
Takes you to 3 fishing spots @ 30 minutes each for the Predator and collects any caught(above 400 which is all of them)
Ignores Small, Release NQ (Stormfish bastards! Need Surface Slap Devs! <3 ), sets Snagging, uses Cordials and Patients2
After all 3 spots have been fished, it takes you to 1 spot for the Lemonfish for 20 minuets.
Then it has the option to take you to Either Eulmore for repairs and reduction OR goes back to the Ondo Cups for Self repair and reduction(Default) and repeats all 5 times!
Defaulted to Self Repair, if you want Eulmore, just un-comment those lines in Chapter 3 and comment the self repair. Side note, this uses the default Eulmore Grid so you shouldn’t need anything special for it just make sure that Waypoint 13 is for the Repair NPC. If you need Eulmore Grid (for some odd reason) I’ll add it to this as well.
What it Needs from you –
BAIT! 😀
For the Predator, it has 2 bait options: Short Bill Minnow(default) or Squid Strip
If you want to use the Squid Strip, just un-comment that line and comment on the Short Bill Minnow in Chapter 1
Lemonfish bait is simply Robber Ball.
Also, the ability to Fly in those locations!
Just in case you don’t know what comment/un-comment is – I am referring to the // before the lines of text in the Scenarios. Remove them to un-comment functions and add them to comment. Commented lines are ignored by MiqoBot. Need them so she ignores the Notes!
Example:
// Note for YOU <– leave the // so Miqo ignores this line (comment)
//teleportIf(Eulmore) <– remove // to tell Miqo to run this function (un-comment)
That’s pretty much it~ Total Runtime per-repeat is about 2 hours. I’ve used this for a while now and have not had any issues. In fact it’s been running while I have been typing this :3
Thanks Much and hope you all enjoy it.
Attachments:
You must be
logged in to view attached files.
Hi I hav ea problem when using this grid for some reason it says excecution error at the way point, please help! thank you
logs: 9:57:22 PM) (SCENARIO) Started:
(9:57:22 PM) ‘fishing predator’
(9:57:22 PM) Chapter: 1
(9:57:22 PM) Teleporting to: ‘The Ondo Cups’
(9:57:24 PM) I’m already there!
(9:57:25 PM) DEBUG: Name is ambiguous. Count = 5. Grid: ‘preditor’
(9:57:26 PM) DEBUG: Name is ambiguous. Count = 5. FishPreset: ‘collect’
(9:57:26 PM) I am ‘FSH’ now! :3
(9:57:28 PM) Adventure calls.. But it is ERROR! (Grid: ‘preditor’, Waypoint: 24/22)
(9:57:28 PM) ERROR (Chapter 1, Line 8): Execution error
There are multiple grids with the name ‘preditor’ so miqo can’t find the right one. Either find it then change its name to something else then edit the scenario accordingly or delete all ‘preditor’ grids then re-download the said grid again.
Hi I hav ea problem when using this grid for some reason it says excecution error at the way point, please help! thank you
logs: 9:57:22 PM) (SCENARIO) Started:
(9:57:22 PM) ‘fishing predator’
(9:57:22 PM) Chapter: 1
(9:57:22 PM) Teleporting to: ‘The Ondo Cups’
(9:57:24 PM) I’m already there!
(9:57:25 PM) DEBUG: Name is ambiguous. Count = 5. Grid: ‘preditor’
(9:57:26 PM) DEBUG: Name is ambiguous. Count = 5. FishPreset: ‘collect’
(9:57:26 PM) I am ‘FSH’ now! :3
(9:57:28 PM) Adventure calls.. But it is ERROR! (Grid: ‘preditor’, Waypoint: 24/22)
(9:57:28 PM) ERROR (Chapter 1, Line 8): Execution error
Hi Clementxd, I’m glad you’re using it and finding it helpful! 🙂
I just ran the Kuno chapter, it went to waypoint 83 which worked fine. Can you be more specific about what the issue is please?
Your Miqo log should look similar to this:
(10:02:13 AM) Adventure calls! I have to travel far away. (Grid: ‘Mor Dhona’, Waypoint: 83)
(10:02:13 AM) Going from 3 to 83 in 23 trips.
(10:02:17 AM) 22 trips more..
(10:02:21 AM) 21 trips more..
(10:02:23 AM) 20 trips more..
(10:02:26 AM) 19 trips more..
(10:02:29 AM) 18 trips more..
(10:02:32 AM) 17 trips more..
(10:02:35 AM) 16 trips more..
(10:02:40 AM) 15 trips more..
(10:02:49 AM) 14 trips more..
(10:02:54 AM) 13 trips more..
(10:02:56 AM) 12 trips more..
(10:02:58 AM) 11 trips more..
(10:03:00 AM) 10 trips more..
(10:03:02 AM) 9 trips more..
(10:03:04 AM) 8 trips more..
(10:03:08 AM) 7 trips more..
(10:03:10 AM) 6 trips more..
(10:03:12 AM) 5 trips more..
(10:03:15 AM) 4 trips more..
(10:03:16 AM) 3 trips more..
(10:03:18 AM) 2 trips more..
(10:03:19 AM) 1 trip more..
(10:03:19 AM) Destination reached!
(10:03:21 AM) Fishing with a new bait (‘Honey Worm’) :3
(10:03:23 AM) Yay! I found some fish ^_^
(10:03:23 AM) Fishing starting…
(10:03:23 AM) Fishing for: 32 min
(10:03:29 AM) Fishing started.
(10:03:39 AM) Yay! Fish! Total: 1 – Time: 0.16/32
(10:03:39 AM) It’s a tiny fish! :3
What about manual pause button like in fishing. Would it be easier to implement?
Is this macro still working for anyone? I have 9 retainers and just attempted to use it and can not get it working. I double-checked my numkey settings. I’m using windowed mode. I stand near the bell, start the macro it correctly selects the bell, the first retainer, and the cursor moves down and correctly selects ventures. I assumed the macro would then select the Quick Exploration option but it selects the class specific options, in this case “Fishing”. It then chooses the lv. 1-5 fishing option and gets stuck there.
Any help would be great. Thanks.
Hey I just got back into ff14 and was wanting to set this up for crafting and fishing and whatnot, but I don’t remember anything about this program really.
I was wondering if I use Renew or Buy to get more time even though I don’t remember if I had a special code or something I needed.
Basically, how do I give yall money?
I’ve noticed with the new 1.3.31 update, that stuff that would normally draw on top of the game, like navigation routes, FATE lists, etc. are no longer appearing. In testing a spearfishing navigation route, they are being followed and Miqobot is doing what she needs to do, just nothing is bring drawn, whether the game or Miqobot is in focus.
Does anyone have an ammended version of this where the downtime is used to gather something else? I haven’t made a scenario yet so I am unsure how to say “Go to another node nearby for 10 minutes and gather(4)
You have to create a grid and a gathering preset containing that grid and the information of what you want to gather then add something like this to another chapter in the scenario:
workFor(00:10)
selectGatherPreset(Preset name)
waypoint(Number of the waypoint you need to run to first [optional])
startGathering(Number of times you want to gather)
repeatAll(Number of times for the whole scenario)
Thanks for taking the time to explain it! I read the guide and it ‘clicked’ but when I went to put it into the scenario I was struggling. I think I was looking for a lazy method of being able to just get a grid and tell it to gather. Your snippet example is exactly what I needed, I’ll modify the Grids to go to a node and play around.
Can workFor() work with ET reference? Or will I have to go to each step and see ‘how’ long I have spare (Miqo has this info as part of afkUntil() but I assume I can’t pass that variable).
For instance if I have 4 mintues before the right ET, I could hardcode workFor(4:00) but if I get there a bit late, I could miss the node and end up throwing off the entire rotation.
It definitely can. It’s also how I found Miqobot a few years ago.
All you have to do is get the fisher job, some bait, go to where you want to fish, and hit the [Start] button under miqobot’s fishing category. You can also choose which skills Miqobot uses, if she uses your cordials or not, which tugs she should ignore, and more.
tl;dr
Yes. That and much MUCH more.
Is this setting already available somewhere or has it not been implemented yet? It’s super good while doing aethersand fishing because you guarantee getting a full collectible node if the first one is a collectible.
there’s a tab in the bot called “fishing,” you might have some luck there.