tul02130

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 24 total)
  • Author
    Posts
  • in reply to: [Request] Reverse Y etc #13142

    tul02130
    Participant
    0

    Ahh, nice to hear that!

    Maybe it would be good idea to add a sticky closed topic of a single message containing all “planned for implementation” features, to prevent reposting?

    This.

    Also people would have their minds blowing seeing what is planned for the future :p

    in reply to: What is the best way to level #13122

    tul02130
    Participant
    0

    Do the MSQ for your first character.
    If you preorder ShB you get earrings that boost combat experience by 30% untill level 70.
    Use armory bonus + earrings to spam squadrons or trust dungeons in ShB.

    in reply to: Scenario Question #13103

    tul02130
    Participant
    0

    Is there a way to set up a scenerio to stop the current chapter once X ET is reached and then head to the specific chapter for the unspoiled node?

    E.G. Miqo is on chapter 3 gathering 2:00 ET hits end chapter switch to chapter 6 tele gather unspoiled X

    I tried looking through the Miqo commands but I didn’t recognize anything that could help. Bit knew to the scenario scene so might have just missed it.

    Usually its done by first waiting till the node spawns via afkuntill and then after mining the node just having the new chapter start.

    Have a look.

    in reply to: Grid to Turn In Particular Leve Repeatedly? #13101

    tul02130
    Participant
    0

    I’m sorry to inform you but it can not be done with Miqo.
    The pick up quest is always in a random spot of three choices.
    Even within a scenario Miqo does not select by name.

    Its possible.

    It’s just not efficient, you have to accept the 2 leves you to not want to turn in, causing the one you plan on spamming to always be in the same position, then you send keystrokes for the selections and turn ins.

    in reply to: What's the best setup for miqo to HQ items? #13090

    tul02130
    Participant
    0

    Sorry to ask question in your thread but is she really good for leveling crafting? I’m gathering mats and sell them raw should I take up crafting? Does she make crafting a lot easier?

    I got all my crafters and gatherers from 0 to 50 in a week using Miqo, I was mostly crafting HQ items to sell while afk.

    in reply to: What's the best setup for miqo to HQ items? #13087

    tul02130
    Participant
    0

    My CPU is amazing so I usually run

    CP 2:1
    progress first
    BB only 100%
    PbP only 100%
    Ingenuity
    Manipulation
    Innovation
    Waste Not

    Some recipes will take 10 seconds to solve, complex equipment multiple minutes, but I dont mind, could always set CP to 8:1.

    WTF? What kind of CPU do you have? Because I have an overclocked i7-7700K, which is already a pretty solid CPU and if I run the same settings as you minus innovation and waste not, solving an endgame craft like rakshasa weapons takes 8 minutes already. With Inno and Waste Not that would theoretically jump up to 1.5 hours o_ô

    Running a Ryzen 2700X which boosts up to 4.3GHz while solving.
    And keep in mind its not endgame recipes, but level 48-50 1star recipes the longest time ive seen was 1minute.
    For lvling manipulation and waste not are quite valuable to get the most HQ out of items, but I agree that once you have all the cross class skills they are pointless.

    CP 4:1
    Ingenuity
    Progress First
    BB only 100%
    PbP only 100%

    This seems more realistic for SB endgame recipes but I have to yet get there.

    in reply to: What's the best setup for miqo to HQ items? #13051

    tul02130
    Participant
    0

    Waste not, and Manipulation are not worth using
    Check this topic out bud
    https://miqobot.com/forum/forums/topic/stormblood-upgrade-stage-2/#post-5570

    Fair point but since I use my preset to spam HQ items for lvling while afk I still need them 🙂

    in reply to: What's the best setup for miqo to HQ items? #13045

    tul02130
    Participant
    0

    It depends on how much time you are willing to invest into solving the recipe.

    My CPU is amazing so I usually run

    CP 2:1
    progress first
    BB only 100%
    PbP only 100%
    Ingenuity
    Manipulation
    Innovation
    Waste Not

    Some recipes will take 10 seconds to solve, complex equipment multiple minutes, but I dont mind, could always set CP to 8:1.

    What is important to HQ consistently is that you unlock the carpenters and weavers level 50 cross class skills.

    in reply to: Miqo not using collector's glove #13025

    tul02130
    Participant
    0

    You have two collector gloves on your hotbar. The first one is inactive and it confuses Miqo.
    Remove botanist skills from miner hotbar and it will be fixed.

    Good to know, I just usually all those skills on a shared bar but if thats the case thanks alot ^^

    in reply to: Optimizing Collectiable Crafting #13009

    tul02130
    Participant
    0

    We apologize if our priorities made you unhappy.

    Absolutely not necessary. I see where you are coming from. Combat assist has to get done one way or another, I just fear that it will consume alot of time and require alot of updating once ShB hits. Regardless im very fine with the bot right now as I mostly use it when I play other stuff to farm.

    in reply to: Optimizing Collectiable Crafting #12994

    tul02130
    Participant
    1+

    Those are the two ways to go about it and shouldnt require any recoding, just conditions.

    I have to agree here. What does any bot need at most is 1) a lot of different sound notifications and 2) a lot of condition checking to let users fine-tune their toons for their personal tasks/taste, until everyone gets his fully optimized full-afk bot for his preferred task. Granted, most users will leave most of these conditions at default values, never ever modifying them; but I bet everyone finds several variables for his personal task which could be lifesaver (or at least great performance booster). Also, adding these notifications and condition checks should be way easier (and thus faster) than major tasks like crafter solver or combat engine…

    I’ve always been of the opinion that the priority should be small efford, big impact.
    Examples would be inventory conditions (if inventory has 3 slots left go turn in, repair, keep farming, max collectability (to save alot of time), diffrent collectability for diffrent fish, etc.

    I agree that the combat system is massively helpful and has to be done, but it would be good if someone in the team could dedicate some small time to QoL changes, but then again, i have no insight into this teams working and im very happy with the product.

    in reply to: Optimizing Collectiable Crafting #12987

    tul02130
    Participant
    0

    It should be rather simple, since the progress is always 1 step away from finish before it starts getting quality up all thats needed is one condition. If collectiblelity is bigger than your set number, use careful synth.

    Should be 5mins of efford to implement.

    Don’t get me wrong, I know what you mean, but I don’t expect the resolver to be optimized for lower than max quality values.
    Also even that should be just fine, you could basically code it so that the recipe is recognized as a max of 500 quality instead of 1000 for example. Those are the two ways to go about it and shouldnt require any recoding, just conditions.

    It’s literally just meant to prevent it from wasting 15steps worth of time using hasty touch + observe when you already reached the max turn in collectability.

    • This reply was modified 5 years, 5 months ago by  tul02130.
    • This reply was modified 5 years, 5 months ago by  tul02130.
    in reply to: [Beta] Combat #12965

    tul02130
    Participant
    0

    I encountered the weird bug a couple of other people mentioned in the past, Miqobot Assist stop doing something at a 3rd summons of The Shifting Altars of Uznair.

    Sometimes, regardless of task, be it gathering, combat assist, or crafting, miqobot might stop to respond entirely for a few seconds, had it a few times that it stopped mid crafting rotation for 2-10 seconds and eventually just continues as usual.
    It sometimes happens if i open/close chat or menus or rearrange stuff on the hotbars while its crafting, but ALSO just randomly when doing nothing. The window in that time has the usual “is not responding” that also happens when its solving a crafting recipe.

    Not sure if thats the same issue you have.

    in reply to: "New Beta Available" #12963

    tul02130
    Participant
    0

    If you download the beta version of miqote bot, does the scenarios and grids carry over also? or you have to import/export?

    They carry over.

    in reply to: Fishing with collect choosing "no" #12943

    tul02130
    Participant
    0

    Would be nice if you could set collect based on fish, for example Icepick needs a collectability of 105 while the other fish in the same water needs 645, so if i want to collect icepick it will flood my inventory with too small of the other kind.

Viewing 15 posts - 1 through 15 (of 24 total)