[SirVGParticipant]

The problems stems from the gathering preset. You have the Eulmore grid saved to it.

Two things you can do.

1. Go to the gathering preset when the scenario isn’t running, change the grid, then overwrite.

2. Change the order of select grid and select gatherpreset in the scenario.

[SirVGParticipant]

melina91 wrote:

I am so sorry to ask this in such a blatant way but- how exactly do input this text into miqobot to make it work?

Click Share, then Import. Find the .txt file you downloaded and you’re done.

[SirVGParticipant]

Uxhak wrote:

so something i noticed with the crafting solver. when using basic touch the solver will not use the combo standard touch even though it cost the same amount of cp as basic touch if you combo but gives better results as it is 125% efficiency while basic touch is only 100%. However the solver will sometimes use 2 basic touches in a row but wont use the combo. This is a waste of efficacy and cp. while the solver is already really good i think this small change might make HQ chances better.

I’m pretty sure that’s a known issue and wasn’t updated because people wanted the crafting solver working sooner for Ishgard ranking, if I remember correctly.

[SirVGParticipant]

I ran my trust scenario of Heroes this morning, no issues myself.

[SirVGParticipant]

Miqobot has no way to identify node bonuses at this time.

[SirVGParticipant]

If you’re already doing diadem stuff, use your skybuilders scrips to get most of your materia needed. Some of the melds do use Grade V or VI which you can get easily with yellow scrips though.

[SirVGParticipant]

Couple of very minor updates, both impacting only the preset. Grid and scenario are unchanged.

1. I checked Use Compass because there’s a couple of spots on the mining side of the scenario that can cause Miqobot to get stuck because it can’t see any points naturally. BTN side doesn’t seem to have this issue.

2. I updated the macro for collectability. It goes Scour -> Brazen Prospector/Woodman -> Scour -> Brazen Prospector/Woodman -> Meticulous Prospector/Woodman -> Collect

The reason for the macro change is for 2 reasons.

1 – increase the chance of a 1000 collectability gather, since 1 1000 point is worth 7 items while 2 of the step down is only worth 3×2 or 6, meaning it’s more worthwhile to try to get the 1000, even at the cost of a gather. I went with Meticulous as the growth needed isn’t a lot, plus the chance for a integrity not getting used. This increased my 1000 collectable gathering almost 3 fold. If 1000 is hit with both Brazen attempts, Meticulous won’t fire and Miqobot will continue on regardless.

2 – In case there’s no GP for Scour, the collectability has a high chance of not getting the 400 point threshold, meaning it’s a dead slot (or technically 2 dead slots). When this happens and Meticulous fires, I’ve always crossed the threshold. (It’s still technically possible to get under 400, but that would require both Brazens to be the bottom possible scores).

If you want to update your preset manually, just check Use Compass and replace the macro with the following:

num0, num2, num2, num2, num0, num8, num8, num6, num0, num2, num2, num0, num8, num8, num6, num0, num6, num0, num2, num0, num0, num0, num0, num0, num0, num0, num0, num0, num0,

Attachments:

You must be logged in to view attached files.

[SirVGParticipant]

I think I have an idea why, based upon your info.

I have Flying Mount Roulette on another hotbar, which is keybind 0. Flying/Diving – Descend is on CTRL+Spacebar and Tilt Camera Up/Down also uses CTRL with Up/Down. I’m sure the path just happened to go just right at certain points to hit the sweet spot to do one those functions at the same time as working on dismounting, creating the CTRL+0 combo that swaps to BTN and swapping routes. I tried to by hand hit CTRL, Spacebar, and 0 and sure enough, swapped to BTN. CTRL+Up/Down+0 also did the swap as well.

Cool to know a little more insight into how the bot works and thinks. Seeing these little quarks is just interesting.

Thank you.

[SirVGParticipant]

I actually have it on 2 locations. One is on a non-shared bar (Hotbar 2, Slot 10) (Ctrl+0) that flips between MIN and BTN (depending on which job is active). I also have it on a shared hotbar. MIN being CTRL+Shift+F10, BTN being CTRL+Shift+F11 (Hotbar 10, slots 10 and 11 respectively).

[SirVGParticipant]

The command is basically icon(#A, #B) where #A is the hotbar, #B is the slot (from left to right).

So it’s on your 2nd hotbar and it’s the 5th slot from the left, you’d use icon(2, 5) to use cordials.

[SirVGParticipant]

Yeah, there should, but there isn’t. There’s nothing in the scenario saying to swap to BTN, there’s nothing in Miqobot log, but suddenly, she swaps from MIN to BTN and starts hitting trees and I have no idea why…it’s completely bizarre.

[SirVGParticipant]

Miqobot gives priority to items in the gather by name list over the slot number. If you wish to gather by slot instead, you will need to delete all entries in the gather by name list.

[SirVGParticipant]

I’m trying to figure out why suddenly Miqobot is swapping from MIN to BTN in the middle of a scenario that doesn’t involve the job(BTN) command at all. She’ll be doing the mining route fine for a while, then suddenly just drops it and goes to the BTN route I have on the scenario.

(8:43:44 AM) Going from 0 to 18 in 3 trips.
(8:43:48 AM) 2 trips more..
(8:43:53 AM) 1 trip more..
(8:43:53 AM) Destination reached!
(8:43:54 AM) Gathering started.
(8:43:54 AM) 	Max node count: 1
(8:43:54 AM) Scanning for shiny gathering nodes like '<anything>' *.*
(8:43:54 AM) I see a shiny node at (394.708893, -296.467804, -188.281601).
(8:43:55 AM) Going from 18 to 3 in 3 trips.
(8:43:55 AM) 3 trips more..
(8:43:58 AM) 2 trips more..
(8:43:59 AM) 1 trip more..
(8:44:01 AM) Destination reached!
(8:44:02 AM) Oh noes! The time is out! It's too late to gather sparkles :(
(8:44:02 AM) Scanning for shiny gathering nodes like '<anything>' *.*
(8:44:02 AM) I see a shiny node at (327.199188, -386.347809, -186.541794).
(8:44:02 AM) Going from 3 to 7 in 11 trips.
(8:44:06 AM) 10 trips more..
(8:44:08 AM) 9 trips more..
(8:44:12 AM) 8 trips more..
(8:44:14 AM) 7 trips more..
(8:44:17 AM) 6 trips more..
(8:44:19 AM) 5 trips more..
(8:44:22 AM) 4 trips more..
(8:44:24 AM) 3 trips more..
(8:44:26 AM) 2 trips more..
(8:44:26 AM) 1 trip more..
(8:44:28 AM) Destination reached!
(8:44:30 AM) Not enough GP for this rotation: 284 of 300 required.
(8:44:30 AM) Hitting that poor node. :3
(8:44:39 AM) Hitting that poor node. :3
(8:44:41 AM) My precious shiny sparkles! (1/1)

I’m trying to keep a further eye on why, but the waypoint 3 is a MIN location and 7 is a BTN one. Not sure why she’s “timing out” and suddenly swapping jobs.

This is the scenario I’m doing, on MIN: https://miqobot.com/forum/forums/topic/oddly-delicate-minbtn-scenario-and-grid/

[SirVGParticipant]

Here2Stay wrote:

Is there a way to make it spam yield 2 every node or every time there is available gp? After running for 8hrs the points were just dismal so wondering if there’s a way to increase it.

The way the gathering preset was set up, is if some items have {} around them, it will ONLY use the gathering rotation on those if it has GP and not on anything that’s not in those. If you want to use it on everything, remove the items that have the {} around them.

(Normally if you want to gather X item with the rotation and without, you need to list it twice, once within the {} and once without.)

[SirVGParticipant]

Make your first set of hotbars.

Then use the in-game command:

/hotbar copy [CLASS TO COPY FROM] # [CLASS TO COPY TO] #

So if you were copying hotbar 1 from CRP to BSM, you’d use:

/hotbar copy CRP 1 BSM 1

[Author]

Posts