Naiya

Forum Replies Created

Viewing 15 posts - 16 through 30 (of 32 total)
  • Author
    Posts
  • in reply to: Gathering Assist #36333
    Naiya
    Naiya
    Participant
    0

    and final set

    Attachments:
    You must be logged in to view attached files.
    in reply to: Gathering Assist #36330
    Naiya
    Naiya
    Participant
    0

    the second set

    Attachments:
    You must be logged in to view attached files.
    in reply to: Gathering Assist #36327
    Naiya
    Naiya
    Participant
    0

    I took some screenshots of my keybinds before. there are several pictures so it will likely take a few posts. the zip is too large to upload

    Attachments:
    You must be logged in to view attached files.
    in reply to: Miqobot (unofficial) status FAQ #36274
    Naiya
    Naiya
    Participant
    1+

    Despite the current situation I would still beg to differ between the Russian government and the people in Russia. A huge amount of people in Russia strongly oppose the decisions of the Kremlin and suffer under the sanctions placed upon Russia due to the acts of their government.

    I agree. Something to keep in mind (for us US users) is the US sanctions against Russia will prevent any of those bot devs from getting the funds you would be paying to use their services. as a result, they may not be able to take US customers.

    The little people have to pay their bills too

    • This reply was modified 2 years, 9 months ago by Naiya Naiya.
    in reply to: How to create a scenario? #36269
    Naiya
    Naiya
    Participant
    3+

    I have some crafting macros and I chuckled when I saw “in bulk” and “30 at a time” but I digress. you *can* create scenarios for crafting and if you’re savvy enough, you can use the new abilities but it takes you putting them on your bar *and* manually inputting the abilities yourself. For instance. I will share with you my macro for pumpkin potage as it exists in Miqo

    1,2,8,3,9,9,4,5,5,5,5,4,6,7,=
    (ETA: You can just find teamcraft scenarios, put the abilities on your bar in order and then slap the numbers into MiQo and BAM instant crafting macro)

    To create a crafting ONLY scenario
    – go to the crafting tab and enter the macro into the “Macro” section
    – Enter the count (in this case 30) into the count section
    – choose repair if you want (I always do)
    – Save it as new and choose an intelligent name (I called mine “Pumpkin Potage” clever, I know)
    – Repeat this step if you have precrafts that require a second macro

    NOW, go to the scenario section
    This is where things get fun. this is the last step of my pumpkin potage scenario

    //This section crafts the precrafts. In this case, Northern Sea Salt

    craftMacro(Northern Sea Salt) //chooses the craft macro we just created
    nqhq() //chooses between NQ and HQ, I leave it empty because my macro is all HQ all the time.
    reclaimOff() //don’t know but I’ve always left this here
    // Northern Sea Salt [Crafted] – CUL – Level 81
    setCraftCollect(off) //because some of the crafts are collectables and I don’t want this one to be
    job(CUL) //changes my job to Culinarian
    recipe(Northern Sea Salt) //chooses the recipe I need
    craft(23) //tells miqo to craft 23 of them
    repair() //Tells Miqo to repair after the recipe is complete.

    craftMacro(Pumpkin Potage)
    nqhq()
    reclaimOff()
    // Pumpkin Potage [Crafted] – CUL – Level 90
    setCraftCollect(off)
    job(CUL)
    recipe(Pumpkin Potage)
    craft(34)
    repair()

    Because Pumpkin potage is right after the precraft, Miqo will run from one craft to another one right after another. In my full scenarios, I often gather everything (including crystals) craft and repair. I rarely craft less than 100 things manually and tend to use MiQo when I’m doing mass crafts (greater than 1000 crafts at a time)

    Hope this helps!

    • This reply was modified 2 years, 9 months ago by Naiya Naiya.
    in reply to: Miqobot (unofficial) status FAQ #36268
    Naiya
    Naiya
    Participant
    5+

    Thoughts and prayers are with them (I know precious little comfort in the middle of a war zone). I already have a few Miqo licenses because I’m a bone head. I’m glad my mistake helped them in the long run. I’ll keep them all going as long as I can.

    I was concerned for a moment over sanctions impacting their ability to receive funds but I don’t think the US sanctions impact them. Now, if Russia has done anything with the banks (or the very real situation of “walking into a war zone”) to retrieve any needed funds is still a concern.

    I will continue to support and wait for them to come back when it is safe for them to do so.

    the bot can wait. Goodness knows I played for years without it. I will do it again.

    Living is the priority atm.

    in reply to: Scenario help #36108
    Naiya
    Naiya
    Participant
    0

    I tried to add the screenies but it gets too big. my guess is you’re going to need to do what I did. You’re going to have to start the entire scenario and watch it. see EXACTLY what it does, and then fix where it’s breaking.

    in reply to: Scenario help #36106
    Naiya
    Naiya
    Participant
    0

    hrm short of taking multiple screenshots I don’t know how to share my keybindings. I have tons of them. they are mostly the default. Any default keybinds that Miqo needs, I have those as well, swapping hotbars are ALT+(1 through 0)

    Attachments:
    You must be logged in to view attached files.
    in reply to: Scenario help #36094
    Naiya
    Naiya
    Participant
    0

    This is from the scenario I have and it’s SPECIFICALLY about containers

    //NEEDED FOR BUYING PART 1

    waypointPrecise(48)
    vangle(0)
    angle(-1.50)
    holdKey(w, .1)
    key(Num0, 2)
    key(Num0, 2)
    key(Num1, 2)
    key(Num1, 2)
    key(Num0, 2)

    //Materiel Container 4.0 –
    key(Num8, 2)

    OBV if you’re using a different nav grid you’re going to have to customize.

    in reply to: Scenario help #36091
    Naiya
    Naiya
    Participant
    0

    yea sure.

    Some things about me (so your mileage may vary:

      I’m an Omni crafter and I can repair my own gear
      My trusts are already level 80 and I’m working to get them to 90
      You *MUST* have the trust button on your bar to run this.

    I broke it into chapters because that’s what works for me. quick breakdown looks like this:

    MANUAL STEPS (Not in the scenario)
    – open trust window
    – select your trusts
    – close the trust window

    Ch 1 = Teleport to GC and turn in gear (cause I normally log in at my FC house, send my retainers out and have gear to turn in)
    Ch 2 = Buy stuff (I focus on venture tokens because I have a crackhead goal of getting 60K of the damn things)
    Ch 3 = Repair, materia extract, and eat food (cause I want to level classes I don’t care to play)
    Ch 4 = Select and run the dungeons and repeat

    What I need to add:
    – Automating the manual steps at the top so I can have Miqo choose the trusts I want to level.

    Attachments:
    You must be logged in to view attached files.
    in reply to: Automatic Targetting #36090
    Naiya
    Naiya
    Participant
    0

    are you running in combat assist mode?
    are you trying to get it to run on it’s own?
    If it’s the second one, which dungeon are you trying to run? Some aren’t implemented yet (81+)
    If you’re running with the implemented dungeons, do you have your toggle target mapped to a hotkey?

    I’ve been running an implemented dungeon all day and Miqo absolutely toggles through targets without my interference.

    in reply to: Scenario help #36081
    Naiya
    Naiya
    Participant
    0

    So I just put one together (it’s a fair amount more complex, but here’s what I noticed:

    Failing to SAVE the scenario after creating it can cause it to “lose” or “skip” steps. As soon as I saved, closed, and relaunched Miqo, she runs like a champ. My scenario is turning things in for seals, buying Ventures, repairing, extracting materia, eating food, running Qitana ravel twice and repeating it all over again – without a problem since the relaunch

    Naiya
    Naiya
    Participant
    0

    Thank you! that did help!

    I went a little crazy and decided to play around with things. I’m currently running the scenario to see how it goes. 2 runs of ravel, turn things in, buy ventures, repair, extract materia (if any) and start again.

    I’m an omni crafter so I didn’t have to figure out the “to to NPC to repair” it made it a mite easier.

    I do manually select my trusts before I start the scenario because I haven’t figured out the automation of the selection yet. that is the next thing I want to do (But i’m supposed to be working and not playing right now so I can’t do it :D)

    Still, Thanks @captainblunt!

    in reply to: Endwalker Miqo Roadmap #36079
    Naiya
    Naiya
    Participant
    0

    have you tried grabbing the ishguard restoration macros that other users have put up and plugging them into Miqo? it’s a little more work but you can finish crafting and it has been well communicated that Miqo crafting solver wouldn’t work until end of 1st quarter or later (4-5 months after launch)

    https://docs.google.com/document/d/1vgtU7HFtG87TrJ9U47vnzkFMhSl5HKz7bjJhRXbxaas/edit#

    Naiya
    Naiya
    Participant
    0

    FWIW, I mass craft with Miqo in an inn room or my FC private chambers. No one around to sus if they can’t see me.

    ETA: you could probably just add some sort of thing to keep yourself from being logged out like they do with the retainers script. something about afk.21 and press shift+7 and repeat three times that’s enough for the retainers to come back and start over again with the rest of the script so it’s likely enough to keep you from being logged out, though not from standing up.

    • This reply was modified 2 years, 10 months ago by Naiya Naiya.
Viewing 15 posts - 16 through 30 (of 32 total)