[xlxleahxlxParticipant]

r51093 wrote:

xlxleahxlx wrote:

Oh wait.. I’m a dummy. I thought just deleting the scenario would get rid of the grid -.- lol Ok lemme try

yes while you can import / export them together and while they work together in synchronicity they are both counted as two separate things and are treated as such by the bot its actually very vexing XD, and with all the updates i was kicking out for the rankings and the new nodes its easy for stuff like this to happen i hope this solves the issue 😀

Its def working now, i am SO sorry for all the hassle -facepalm- im ashamed lol

[xlxleahxlxParticipant]

Oh wait.. I’m a dummy. I thought just deleting the scenario would get rid of the grid -.- lol Ok lemme try

[xlxleahxlxParticipant]

r51093 wrote:

xlxleahxlx wrote:

r51093 wrote:

xlxleahxlx wrote:

I’m getting this error whenever it hits phase 4 and gets to the “Waypoint(551)” part. (I am using the file you just put 2 hours ago, above my comment)

6:15:51 PM) Adventure calls.. But it is ERROR! (Grid: ‘The Diadem ⚒🌱’, Waypoint: 551/491)
(6:15:51 PM) ERROR (Chapter 4, Line 10): Execution error

i cnat see any obvious issues in the scrario i will keep looking but for now i added a wait timer for the loading screen i think that may fix the issue please let me know if you get the error again

I’ve added 2 photos. 1 is my character sitting at waypoint 442 before going to phase 3 (not sure what all those num commands do but my character just sits there) and the 2nd is my miqo application. When phase 4 starts it errors out at the 551 commands.

Question: Should I be starting the miqobot scenario outside of diadem? Because i’ve tried that too and it doesn’t click the npc. So I’ve been starting it inside, at the spawn.

i think i get it waypoint 422 is in the Firmament you are starting the scenarios when you are in the diadem, the num commands is the bot trying to join the diadem start the scenario outside of the diadem in ” The Firmament “ the scenario / bot will join the diadem on its own it is set up this way so that the scenario can continually re-enter the diadem at the end of the scenario also dont tuch any keys or move the mouse when chapter / phase 3 is running or it can brake the scenario ( miqobot is finicky when it comes to the send key commands).

Note: you can also start the scenario if you like from chapter 4 just simply click chapter 4 so its highlighted then hit start the scenario will sart from chapter 4 then and work as intended (this is only needed if you wish to sart the bot while you are in the diadem)

I started in the firmament this time, and now I’m sitting at the spawn inside diadem when i get the error.. So everything works great, (i had to delete the repairs cuz my crafters arent lvled up) and it brings me inside the diadem on its own n everything. Then once inside, it tries to go to 551.. I’m not sure what is going on, and I don’t want to skip to the other phase because then when it wants to repeat itself, its going to hit this same problem. I’m really confused about what is going on D:

EDIT: So looking at the error it says 551/491 right? doesn’t that mean 491 is the highest waypoint you have, therefor 551 doesn’t exist? I flew around to double check and I don’t see anything 500+

(2:52:13 PM) (SCENARIO) Chapter 3 complete.
(2:52:15 PM) I am ‘botanist’ now! :3
(2:52:16 PM) Sending key: ‘num.’ (Delay: 0.00 sec)
(2:52:16 PM) Sending key: ‘num.’ (Delay: 0.00 sec)
(2:52:16 PM) Sending key: ‘num.’ (Delay: 0.00 sec)
(2:52:16 PM) Sending key: ‘num.’ (Delay: 0.00 sec)
(2:52:17 PM) Sending key: ‘num.’ (Delay: 0.00 sec)
(2:52:19 PM) Adventure calls.. But it is ERROR! (Grid: ‘The Diadem ⚒🌱’, Waypoint: 551/491)
(2:52:19 PM) ERROR (Chapter 4, Line 11): Execution error

• This reply was modified 3 years, 11 months ago by  xlxleahxlx.
• This reply was modified 3 years, 11 months ago by  xlxleahxlx.
• This reply was modified 3 years, 11 months ago by  xlxleahxlx.
• This reply was modified 3 years, 11 months ago by  xlxleahxlx.

[xlxleahxlxParticipant]

r51093 wrote:

xlxleahxlx wrote:

I’m getting this error whenever it hits phase 4 and gets to the “Waypoint(551)” part. (I am using the file you just put 2 hours ago, above my comment)

6:15:51 PM) Adventure calls.. But it is ERROR! (Grid: ‘The Diadem ⚒🌱’, Waypoint: 551/491)
(6:15:51 PM) ERROR (Chapter 4, Line 10): Execution error

i cnat see any obvious issues in the scrario i will keep looking but for now i added a wait timer for the loading screen i think that may fix the issue please let me know if you get the error again

I’ve added 2 photos. 1 is my character sitting at waypoint 442 before going to phase 3 (not sure what all those num commands do but my character just sits there) and the 2nd is my miqo application. When phase 4 starts it errors out at the 551 commands.

Question: Should I be starting the miqobot scenario outside of diadem? Because i’ve tried that too and it doesn’t click the npc. So I’ve been starting it inside, at the spawn.

Attachments:

You must be logged in to view attached files.

[xlxleahxlxParticipant]

I’m getting this error whenever it hits phase 4 and gets to the “Waypoint(551)” part. (I am using the file you just put 2 hours ago, above my comment)

6:15:51 PM) Adventure calls.. But it is ERROR! (Grid: ‘The Diadem ⚒🌱’, Waypoint: 551/491)
(6:15:51 PM) ERROR (Chapter 4, Line 10): Execution error

[xlxleahxlxParticipant]

Repair is a button in your Actions & Traits [General tab] that you can drag to your bar and its used to repair your own gear (requires dark matter grade 7 for max lvl gear). However, you can not use repair on your own unless you have your crafters also leveled up. You can delete that part of the scenario and just hit up a mender every couple hours since your gathering gear doesn’t break all that quickly. Unless, you can add a part into the scenario that takes you to your closest mender.

[xlxleahxlxParticipant]

Thanks <3

[xlxleahxlxParticipant]

Thank you, I thought I was the only one. I’m having the same issue.

[xlxleahxlxParticipant]

Hi again wowitsmyeyes! I’ve been fully using and loving your scenario since you released it and I was wondering if you could help me add agewood in there too somewhere? Like continue fishing for scuroglow but when agewood pops up i leave to go get that and then come back?

[xlxleahxlxParticipant]

I found my problem. Sometimes I have to stop my bot to talk to ppl, as to not get caught lol. And i restart it at the chapter I was already on.. Which then negates the whole (99) thing.. blegh =\

[xlxleahxlxParticipant]

But it doesn’t though, thats the issue. After Chapter 4, my character stops and sits there until it afks out of the game. I think something may be missing that tells the bot to bring me back to il mheg after lakeland. Because my character just chills at the Lakeland mining area when finished with Chapter 4 and doesn’t go back into chapter 2 for the fishing part.

• This reply was modified 5 years, 4 months ago by  xlxleahxlx.
• This reply was modified 5 years, 4 months ago by  xlxleahxlx.

[xlxleahxlxParticipant]

Random question, is there a way to make it go back to Chapter 1 after 4 ends? Or do I have to just keep manually restarting chapter 1 after 4 finishes.

• This reply was modified 5 years, 4 months ago by  xlxleahxlx.

[xlxleahxlxParticipant]

Appreciate you.

[xlxleahxlxParticipant]

xlxleahxlx wrote:

Could you copy paste the whole script I’d need or was that literally all of it? I don’t know how to do the scenario stuff. Do I need to input the skill rotation too because I have a specific rotation I use because I don’t like Miqo’s rotation. Also can you add a repair command at the end of the craft too?

Ignore all this, I got it working after reading into it more. Thank you so much for your help!

[xlxleahxlxParticipant]

Could you copy paste the whole script I’d need or was that literally all of it? I don’t know how to do the scenario stuff. Do I need to input the skill rotation too because I have a specific rotation I use because I don’t like Miqo’s rotation. Also can you add a repair command at the end of the craft too?

• This reply was modified 6 years, 3 months ago by  xlxleahxlx.
• This reply was modified 6 years, 3 months ago by  xlxleahxlx.
• This reply was modified 6 years, 3 months ago by  xlxleahxlx.
• This reply was modified 6 years, 3 months ago by  xlxleahxlx.

[Author]

Posts