Search Results for 'fishing'

[ReliefParticipant]

As long as your looking into revising some stuff for fishing… Would it be possible to get findFish() to like slowly spin in a circle then do a baby step then spin again looking for fish? And maybe have skipBadWeather() skip the rest of the chapter.

I’m fishing for the Feast of Famine fish. I’m teleporting in, checking the weather, then running to the fishing hole to fish. If its good weather it fishing for an hour, if the weather is bad it fishes one. I would rather if the weather was bad to just skip to the next chapter instead.

[bottybotParticipant]

I know I am probably doing something wring here but I’m getting this;

(15:38:15) WORK for: 00:40:00 (2400 seconds)
(15:38:15) Fishing starting…
(15:38:15) Fishing for: 40 min

It doesn’t start fishing, just stands there for a few minutes, then repairs, then goes to next chapter, any ideas what ive done wrong?

[LyfoxParticipant]

It expects that you check weather at times of change 0ET, 8ET, 16ET. Here it was already asked in another thread and i did an example there: https://miqobot.com/forum/forums/topic/scenario-weatherfishing/

What you want to do is probably afkUntilGoodWeather() but theres no such function atm. Would be nice to have. Hey Miqo maybe in the next scenario update?

Hi all,

can someone tell me how the skipBadWeather() function is supposed to work in scenarios? I tried to figure it out, but it seems like I think into a wrong direction.

If I use something like this (example reduced to the lines which matter):

—
resetGoodWeather()
addGoodWeather(Thunder)
addGoodWeather(Thunderstorms)
[other stuff]
skipBadWeather()
fish(40)
repeatChapter(99)
—

I would expect Miqo to take a break, skip the next line, or whatever. But all I get is this as a result:

—
(21:42:20) (SCENARIO) Started:
(21:42:20) ‘Namitaro’
(21:42:20) Chapter: 1
(21:42:26) Yay! I found some fish ^_^
(21:42:26) Uh-oh ‘Clouds (03)’. It’s a bad weather!
(21:42:26) WORK for: 00:01 (60 seconds)
(21:42:26) Fishing starting…
(21:42:26) Fishing for: 40 min
(21:42:29) (SCENARIO) Stopping…
(21:42:30) Well, you know, I don’t mind continuing it any time! 😉
(21:42:31) (SCENARIO) Stopped.
—

What is my mistake here?

Thanks for an info!

[anon.okamiParticipant]

Update: So I did what was said and launched the scenario at the correct time. Since then I have had no issues with AFK timer everything runs smoothly. I love Miqo so far, great for mass farming certain materials. Thus far I have tested gold saucer, fishing and gathering. All work great! My next project is to tinker with the crafting tab.

[D_Walker103Participant]

Is there a 1-50 leveling for Fishing that I’m missing somewhere? I’ve searched the forums and looked everywhere I could find. I know that the bot itself has a “Leveling” profile for fishing, however I didn’t notice it doing anything other than just attempting to fish exactly where I was at.

I get a message when I start miqobot that reads

(WARNING) I was corrupted! Please:
1. DO NOT RUN two different versions of Miqobot at the same time.
2. WHITELIST Miqobot application in your antivirus and firewall.
3. RESTART Miqobot after this.

So I went into my AV and Firewall, made sure to whitelist it and set exceptions. I noticed that my AV had blocked something in the AppData folder called miqoradar.exe so I also tried to add an exception for that as well, though I couldn’t find it in that folder. The only thing in there are two DLL files. So I deleted the folder, deleted the miqobot application, and redownloaded it and tried to run it again with all the exceptions still in place, it didn’t say it blocked the miqoradar.exe this time but I still don’t see the 3D Radar in game or that application in the folder. I’ve also tried going into the miqobot settings and checking both rendering options to see if either one would work with no luck. At this point I have no idea what could be going on.

Also just a quick aside, as far as I can tell everything else seems to work. Crafting solver works, minigames and chocobo racing work, scenarios work, fishing and gathering. I’ve tested every other part of the bot and it all seems to function appropriately, only the 3d radar seems off.

• This topic was modified 6 years, 11 months ago by  jedahdemon.

Hello, when I go fishing, some mistake happens:
(13:31:04) Hello! I am your Miqobot!
(13:31:04) Searching for a trial catnip…
(13:31:04) Oh no, we have run out of trial catnip! Do you have any catnip license?
(13:31:06) I found the game! Let’s play together! :3
(13:31:07) Fishing starting…
(13:31:07) Fishing for: 40 min
(13:31:07) Oops, was that a disconnection? >.<
(13:31:07) Guess I’ll need you to log me in again. <3

I wanted to test to see if I buy it or not. Thank you.

I needed some blacklip oyster, so while fishing for some I made this scenario.

1 First off it will teleport you to Horizon
2 Then equip your fishing gear
3 Then take your mount to Vesper bay in front of the repair NPC
4 Repair your gear
5 Head to a random waypoint
6 stealth when you get up around the fishing area
7 equip Yumizuno bait (I prefer lures to real bait for prolonged fishing)
8 Miqo will hit the = key wait 2 seconds and hit it again
9 Fish for 60 minutes
10 repair with dark matter if you can
11 She’ll go to another random waypoint 3 time (so 3 hours of fishing)
12 then Miqo will go back to the repair NPC to fix your gear.
13 Then keep fishing for 3 hours and repeat 9999 times (3hours X 9999times = forever, lol)

**Key notes – the = key is where I have the food I want Miqo to eat while fishing.

Attachments:

You must be logged in to view attached files.

[ReliefParticipant]

Didn’t work for me. It will open the repair NPC, then close without repairing, then open up the self repair and go on to crafting.

So I made this one. By using a waypoint in front of a repair NPC, I can add this to any mining/botany/fishing script and repair every few hours and continue gathering without broken gear. I usually only use the first segment to repair equip gear, it bugs out if you don’t have something needing repair in every category.

waypoint(34) //waypoint in front of repair NPC
key(f12, 1.0)  //target npc
key(num0, 1.0) //interact
key(num8, 1.0) //move up
key(num8, 1.0) //move up
key(num8, 1.0) //move up
key(num0, 3.0) //confirm //repair equipped gear
key(num6, 1.0) //move right
key(num0, 3.0) //confirm
key(num4, 1.0) //move left
key(num0, 3.0) //confirm

key(num2, 1.0) //move down //repair Main Hand/Off Hand
key(num0, 3.0) //confirm
key(num6, 1.0) //move right
key(num0, 3.0) //confirm
key(num4, 1.0) //move left
key(num0, 3.0) //confirm
key(num4, 1.0) //move left
key(num0, 3.0) //confirm

key(num2, 1.0) //move down // repair Head/Body/Hands
key(num0, 3.0) //confirm
key(num6, 1.0) //move right
key(num0, 3.0) //confirm
key(num4, 1.0) //move left
key(num0, 3.0) //confirm
key(num4, 1.0) //move left
key(num0, 3.0) //confirm

key(num2, 1.0) //move down // repair Waist/Legs/Feet
key(num0, 3.0) //confirm
key(num6, 1.0) //move right
key(num0, 3.0) //confirm
key(num4, 1.0) //move left
key(num0, 3.0) //confirm
key(num4, 1.0) //move left
key(num0, 3.0) //confirm

key(num2, 1.0) //move down //repair Neck/Ears
key(num0, 3.0) //confirm
key(num6, 1.0) //move right
key(num0, 3.0) //confirm
key(num4, 1.0) //move left
key(num0, 3.0) //confirm
key(num4, 1.0) //move left
key(num0, 3.0) //confirm

key(num2, 1.0) //move down //repair Wrists/Ring
key(num0, 3.0) //confirm
key(num6, 1.0) //move right
key(num0, 3.0) //confirm
key(num4, 1.0) //move left
key(num0, 3.0) //confirm
key(num4, 1.0) //move left
key(num0, 3.0) //confirm

key(num2, 1.0) //move down //repair Inventory
key(num0, 3.0) //confirm
key(num6, 1.0) //move right
key(num0, 3.0) //confirm
key(num4, 1.0) //move left
key(num0, 3.0) //confirm
key(num4, 1.0) //move left
key(num0, 3.0) //confirm

key(esc)

[blahblahblahParticipant]

I’m not experienced with scenarios. But with how that looks, when you have fishpreset, that should take the preset in the fishing tab and I would have to change nothing?(as in it would still use cordials, the right hookset, sit, stealth, all teh settigns in that preset, etc) The only thing I would need to add would be the blacklist for mooch?

[mqdremParticipant]

A lot of the more complicated fishing things have to be handled in the scenario box, which is kind of a pain sometimes haha. I actually just did this fish, so I can just show u what I went with

fishPreset(double mooch) << I have a preset in the fishing tab that is double mooch, just makes sure I’m always mooching
moochBlacklist(Goldfish) << this says DON”T mooch the goldfish.. I’m not sure if there is another way to say mooch only silver fish.
afkUntil(8:52) << I set up times for when I could fish but this didn’t work, because if you afk near a fishing hole, the fish ‘sense something is amiss’
fish(15) << this says fish for 15 minutes, I don’t know how to check how long the fishing windows will be so I just do generic 15 minutes.
teleport(Estate Hall, 2) << this tells it to teleport to my house after

I’ve been doing a lot of fishing recently (trying to catch every big fish in the game) and I’ve noticed a few times that when I was fishing in a small window that I could get 2 or three different moochable fish. But only one of those fish would get me the big fish i was hunting. So, I was wondering is there a way (and I’m blind) or would it be possible to implement a way to tell Miqobot to only mooch a certain fish?

Since Miqobot knows what fish we catch. Could there be someway to have a option to enter the fish name and tick a “only mooch [manually enter fish name here]” box.

It’s not something I really noticed or tought about until now when fishing for fish with small mooch windows, like the Wootz Knfiefish Zenith. Since you can get goldfish and silverfish that mooch but you only want to mooch the silverfish.

[ZzoomersParticipant]

It is spear fishing

[kontuParticipant]

Location :
http://ff14angler.com/spot/90452

Not sure what kind of file they want – You’d only need a grid for navigation to the area for use in a scenario, otherwise fishing is just traveling there and clicking “Fish”