Search Results for 'fishing'

[AnachorParticipant]

I try it again now and it doesnt work again…this is what miqo says:

(02:17:36) All gear repaired ^_^
(02:17:37) Adventure calls! I have to travel far away. (Grid: ‘Diadem Fishing Grid’, Waypoint: 15)
(02:17:37) Going from 12 to 15 in 4 trips.
(02:18:06) Sorry, can’t mount 🙁
(02:18:36) Sorry, can’t mount 🙁
(02:18:36) 3 trips more..
(02:19:05) Sorry, can’t mount 🙁
(02:19:05) Woah! A 689 seconds trip? I don’t think I can manage that. Let’s try 300 seconds first, okay? :3

It try to mount every time and nothing happens…then he cancel the fishing and run but didnt mount.

[AnachorParticipant]

It doesn’t always happen, today it works two times…miqo says nothing when it’s not work…it trys everytime to mount and mount and mount and mount but it can’t because the character stucks in der fishing…and sometimes it works perfect.

[AnachorParticipant]

I got the problem that my character not cancel fishing, its stuck and the char can not mount.

• This reply was modified 4 years, 6 months ago by  Anachor.
• This reply was modified 4 years, 6 months ago by  Anachor.

Hello all! I’ve searched throughout the forum and found nothing for phase 3 fishing, so heres my attempt at it. Its very VERY rough and doesnt check weather. It goes to all 4 islands in order and fishes for 30 minutes each repairing after each session, afterwards exiting and re-entering the Diadem.
You can adjust the bait and fishing preset to your liking. Along with the Scenario file, i’ve added the navagation grid if you want to adjust that to your liking as well.

For those who are new like me: when changing the Bait and preset, please keep them within the brackets. As for changing the fishing preset: Go to the fishing tab in Miqo, click new, name it what you like, adjust the settings, and save. You can copy/paste into the chapter with in the scenarios. Ive added images if that helps.

If someone figures out the weather check in Miqo before I do I’d greatly appreciate it. Otherwise Ill follow up with an updated scenario and grid.

Attachments:

You must be logged in to view attached files.

Ive been messing around with the fishing settings, going to each respective island when the weather changes, it does alright.

[TagoParticipant]

I leveled All my crafters and gathered in a week in Diadem(FSH in ocean Fishing). Look for the scenarios to gather MIN and BTN, just remember to change the slot(and filters if needed) in the preset for a level appropriate, and save.
Its more o less like this for each crafting Job:
1-50 40x crafts = 200 mats lvl 1 each(Slot 1)
50-60 30x crafts = 200 mats lvl 1 each(Slot 1)
60-70 40x crafts = 200 mats lvl 60 each(Slot 2)
70-80 40x crafts = 400 mats lvl 60 each(Slot 2)

Remember to use Engineer/Survival manuals and food, or you’ll need more time and resources.

Assembled by manually scraping the FF14 Gamer Escape wiki – all 1200+ pages on the seafood category – this preset contains only items that meet ALL of the following criteria:

• The item can be fished up
• The usage section includes an entry for desynthesis
• The usage section DOES NOT include entries for quest turn-ins, trades, recipes that use it, reduction, or collection
• Levequests, supply missions, and aquarium displays were not counted in the above – these items MAY be used for such things
• The ability to print the items onto canvases was also ignored – many of these items can be put onto canvases

The intent was that while fishing for ingredients or to level up, this preset can be used to clear out things that you don’t want. If you’re looking for particular items for some purpose, you want to use them (or at least put them in your chocobo saddlebag) BEFORE using this preset. As a matter of course, I would just recommend saving things you know you want, using this preset, and then going over whatever’s left to decide if there’s anything else you don’t want to keep afterward.

Also, since there are eight hundred and sixty-six entries in this list, no attempt was made to sort them according to the in-game desynthesis display, so I just left them alphabetised. Yes, that means Miqo will probably be going up and down the list a bunch. You are more than welcome to sort it yourself, but I don’t even have access to all of these items let alone the interest in spending a day or five sorting them by the game’s method.

Total time for creation was a couple of hours, thanks to three different mini-scripts I wrote for this specific project.

• This topic was modified 4 years, 6 months ago by  Vixen. Reason: Forgot I need to use strong tags not b tags

Attachments:

You must be logged in to view attached files.

We all know Miqobot is the best bot out there for FFXIV. But what are your favourite things about her? What, in your opinion, makes Miqo the best FFXIV bot there is?

My favourite selling points, in no particular order:

• No extra fees, at all, whatsoever, at any time – once you have a license, you have the full functionality of the bot, plus any and all future features added during your time using it.
• Low price – $10 for a full month, and as mentioned above, you get everything for those $10. Absolutely well worth the price!
• Active (and interactive) dev team and a live community – you can make suggestions and requests here on the forums and the devs pay attention and respond to you. Same goes for asking for help, I’ve never even had to wait a single day for a reply.
• A lot of features, especially considering the low price! Even ignoring the scenario engine, there’s gathering, fishing, spearfishing, custom navigation paths for all three of those, crafting, desynthesis, 3D entity radar, FATE radar, PotD radar, combat assistance, chocobo racing, and GS minigame farming. And that’s just the features I know how to use, I never did figure out the treasure hunt thing.
• A scripting engine, for custom scenarios – including the ability to wait for/until some time, teleport around, move to points on a navgrid, fine-tune settings for other automated actions, and even manually trigger keybinds and actions in case there isn’t a function for what you want. If it gets conditionals or full flow control at some point, you could probably have Miqo play half the game for you; automating dungeon farming would be as easy as turning on combat assist and writing a scenario to move to the next area once all enemies are dead. As it is now, you can tour the world for fishing without even touching the game yourself. You don’t even need to be a programmer to use it!
• Licenses are NOT per-machine. You can save your license to a file that’s only valid on that machine, but you can still put in your license key on another machine, in case you play across multiple computers for any reason.
• Support for multiple instances of the game, too! On the monitor tab, you can tell Miqobot to attach to a specific instance, in case you have a beefy machine and want to run two characters at once.
• The interface is, for the most part, so simple and easy as to be self-explanatory. You go to the fishing tab, you probably know what everything there does. Same for the crafting/gathering sections. And if you don’t know something, you can ask on the forums here and either another user or the devs themselves will help you out.
• Export/import – you can create a navigation grid or a preset for just about anything Miqo can do, and then export it to a shareable file that other people can import. If you don’t want to build your own nav paths for something, someone probably has one already, and if not there are people who take requests too.

And also, just a personal bit I like, the presets are all stored in plain text, with a self-explanatory format. Thanks to that, I’ve written my own organisation program for them; I can close Miqo, run my organiser, and open Miqo back up, and know that all of my presets and paths are sorted according to my own criteria, and minor cleanup tweaks have been automated for things like generated naming conventions.

If the devs see this, thank you for all the time and effort you’ve put into making Miqobot the best FF14 bot out there. Your work is amazing, and I know it takes a lot of effort. Thank you.

To everyone else, what are your favourite features in Miqobot?

[NotABotterParticipant]

Bumping this so it’s on the front page. Took some digging to find a fishing scenario.

• This reply was modified 4 years, 6 months ago by  NotABotter.

[NekroParticipant]

lalafell wrote:

There’s multiple triggers for a suspicious message in the game. There’s the 45 min one, which requires you to just move at least a few feet away. Then there’s one for the pool itself. I don’t know exact times, but it takes a few hours at least. Moving to another pool in the zone works to reset this one, but if you continue to fish in the same zone for a really long time, you’ll get hard-locked out of fishing within that entire map until you leave, cast your line in a pool in another zone, and then you can come back.

I’ve run into the hard-lock in Diadem quite a few times and now just cast my line at Gridania or Lav Beds every few hours. I haven’t tested this scenario out yet, but it seemed you were having issues with suspicious fish, so I hope that helped.

Yeah the probably easiest route is to just reset every 30min or 60min (if you switch spot once, like in my second full updated post). Thanks for the intel though, could be very helpful for future stuff, if the conditions are better known.

clementxd wrote:

hey for some reason i use this secnario and get to the fishing spot, it automatically says the fishing is sensing something amiss, is this a bug or something with the game by any chance?

In that case you hit the suspicous timer, either you fished too long in the same spot, were standing too long afk near those fishing spot or something else. You could solve that by fishing in another area once, for example in Il Mheg or Gridania, etc.

I currently don’t have much time for ffxiv and miqo. So I can’t look for a good reset spot in Norvrandt to save on the port costs. If you want a working method (so no fishes sense something amiss), just use the first Scenario download from here: https://miqobot.com/forum/forums/topic/scenario-blue-crab-farming/#post-23773
and then remove the Fishing Preset and re-import it from the post here: https://miqobot.com/forum/forums/topic/scenario-blue-crab-farming/#post-24002

I tried it once and even without actually hooking a fish, you will reset the fishing (or at least postpone it enough, so it doesn’t get recognized in 2 hours)
Once I’ve time again, I will make a final version, with a reset fishing hole in Norvrandt and maybe the same bait to use. So you don’t need two baits in your bag.

[clementxdParticipant]

hey for some reason i use this secnario and get to the fishing spot, it automatically says the fishing is sensing something amiss, is this a bug or something with the game by any chance?

[curseofthegodsParticipant]

Nekro wrote:

I don’t exactly use this scenario, but except that it goes to another zone to reset the fishing hole (mine is just going between 3 different spots, every 30min) it seems about the same procedure. I get an average of 30 fish in an hour. Every fish results in an average of about 3.5 Aethersand (most of them are 8/8, almost none of them go below 4/8).

So my average per hour is around 100 aethersands, ~70% of them are HQ.

I used 460HQ Gathering gear for this, so if you have the new gear, you might even get better results. But it depends on luck aswell of course. You can reduct a lot of 8/8 fish to just water crystals, if you are unlucky, so keep that in mind.

I find fishing for aethersands way more relaxing, more consistent than botanist/miner and also less suspicious for others. Cause you don’t really move that much (just if approaching the fishing spots)

Could you share your scenario please?

[sadboyprimeParticipant]

edgedy wrote:

The old fishing one works just fine. But you’re better off adjusting based on the weather.

to which are you refering to if you don’t mind?

[lalafellParticipant]

There’s multiple triggers for a suspicious message in the game. There’s the 45 min one, which requires you to just move at least a few feet away. Then there’s one for the pool itself. I don’t know exact times, but it takes a few hours at least. Moving to another pool in the zone works to reset this one, but if you continue to fish in the same zone for a really long time, you’ll get hard-locked out of fishing within that entire map until you leave, cast your line in a pool in another zone, and then you can come back.

I’ve run into the hard-lock in Diadem quite a few times and now just cast my line at Gridania or Lav Beds every few hours. I haven’t tested this scenario out yet, but it seemed you were having issues with suspicious fish, so I hope that helped.

[SpadeShootaParticipant]

sternlast wrote:

SpadeShoota wrote:

Hey SLYG just wanted to let you know real quick. I have been using this scenario with these presets for a couple of days now. I think they work pretty similarly to the OP which is great; however, you do run into the issue of it being set to the number of gather attempts and then just completely skipping a timed node. The mining portion also seems to hit some snags where it actually just sits there, that is fine though as I personally just remove that segment of the scenario.

The last thing I am having problems with is the Diadem Boom segments of the scenario. I am going to try and rewrite them, but it appears that they do not work. All they do is fly back and forth between waypoints a few times (looks very very suspicious as it is in the same line). For now I am removing those as well.

I will say that when it did gather it did a great job! Although it kill switched itself 2 hours in. Is there a way to loop it like the infinite mining one does? I assume its just copy and paste the part of the scenario that does, but figured I would make sure that would not create a conflict first.

You will always trigger the kill switch if you run this scenario continuously for over 180 minutes. The game will automatically kick you out of the duty after your time limit expires.

I’m not sure why diademBoom isn’t working for you. Please check that you are using the latest version. Delete everything from the prior version before updating to the new version. The waypoint numbers will shift if I make any additions or deletions to any of the waypoints numbers that come after, so that would throw the scenario off if you’re using a new scenario, but still using an old grid.

I recently found out that the fishing islands has a lot of mobs, so I changed the diademBoom location to go there. There’s 5 mobs at the new location, so no need to hop between different points.

I set it to leave the duty and re-enter it after going through everything, via adding this string into it:

key(u, 1) // duty finder
key(num4, 1)
key(num0, 1)
key(num4, 1)
key(num0, 1)
afkFor(00:00:10)
job(BTN) // closes any windows
key(num0, 1)
key(num0, 1)
key(num0, 1)
key(num0, 1)
key(num4, 1)
key(num0, 2)
key(num8, 1)
key(num4, 1)
key(num0, 1)
afkFor(00:00:10)

repeatAll(999)

So instead of using Return it leaves the duty and reques after the first run through of the scenario. May not be very efficient, but it worked for a bit before it kill switched itself haha.

I am not sure as to why the Diademboom is not working for me either. Literally just went from waypoint to waypoint and did nothing. I will try it with the updated stuff and get back to you though. I am using SLYG version with the timed nodes though. Do you think that may be the issue? Because I wanted to rack up more points.