(Phase 2) Diadem Fishing Scenario

Forum › Forums › Grids and Presets › (Phase 2) Diadem Fishing Scenario

This topic contains 23 replies, has 13 voices, and was last updated by  NotABotter 3 years, 6 months ago.

Viewing 15 posts - 1 through 15 (of 24 total)
1 2
  • Author
    Posts
  • March 16, 2020 at 1:38 pm #20844
    Chevstr
    Chevstr
    Participant
    1+

    @Miqobot:
    This thread is related to Phase 2 of Ishgard Restoration.
    With the arrival of Patch 5.31, it is outdated.

    I’ve set it to fish for 30 minutes at each island with the relevant bait. To avoid too many characters following the exact same route and fishing in the exact same spots please adjust the grid waypoints slightly. Miqo has advised that the Diadem is highly congested at the moment so following the exact same routes I’ve set is a dangerous move.

    So far this has worked well enough for me. I hope it does for everyone else too 🙂

    Attachments:
    You must be logged in to view attached files.
    March 16, 2020 at 4:21 pm #20851
    jd1337
    jd1337
    Participant
    0

    Preset has double hook. is it good here?

    March 16, 2020 at 4:25 pm #20852
    jd1337
    jd1337
    Participant
    0

    (also thank you!!)

    March 16, 2020 at 6:13 pm #20859

    hidingfromu
    Participant
    0

    Double hook is only really useful on the rarer fish, and the Gobbiemasks I think, so you’d have to babysit it and cut in on Miqo when they bite (very hard, Miqo will beat you to the hook).

    Also aren’t the lakes only for leveling FSH, no turn-in fish to catch? (I might be wrong).

    Also thanks 🙂

    • This reply was modified 4 years, 1 month ago by  hidingfromu.
    March 16, 2020 at 8:34 pm #20863

    Miichara
    Participant
    1+

    Only 2 of the lake fish give points towards ranking but they do desynth into mats so it is dependent on what mats you really need if you are also crafting.

    P.S. Thank you for the Scenario. It works like a champ.

    • This reply was modified 4 years, 1 month ago by  Miichara.
    March 16, 2020 at 8:51 pm #20865
    Chevstr
    Chevstr
    Participant
    1+

    Yay! I’m glad it’s useful 🙂

    Yup, I am aware that not all the islands give points. Wanted to include a complete set so that people can do all of them or just whichever ones they need (and it be there already). And DH is there in the hopes of occasionally DHing a fancy fish – has worked ok enough for me to afk and come back to enough good ones.

    Happy fishing all!

    March 17, 2020 at 1:02 am #20874

    lazyffxivplayer
    Participant
    0

    Im new to this.. and this is what happened when i tried to use ur script without any changes.

    (02:01:25) (SCENARIO) Started:
    (02:01:25) ‘Diadem Fishing’
    (02:01:25) Chapter: 1
    (02:01:26) DEBUG: Name is ambiguous. Count = 3. Grid: ‘Diadem Fishing Grid’
    (02:01:26) Adventure calls! I have to travel far away. (Grid: ‘Diadem Fishing Grid’, Waypoint: 16)
    (02:01:26) Going from 24 to 16 in 6 trips.
    (02:01:26) Sorry, can’t move. It’s dark and creepy around me! I’d better hold my breath, so nobody would find me.
    (02:01:27) Current zone: Unknown (ID 0385)
    (02:01:27) Sorry, can’t move. I had a blackout and I’m still hiding in the corner!
    (02:01:27) 6 trips more..
    (02:01:27) Sorry, can’t move. I had a blackout and I’m still hiding in the corner!
    (02:01:27) 5 trips more..
    (02:01:27) Sorry, can’t move. I had a blackout and I’m still hiding in the corner!
    (02:01:27) 4 trips more..
    (02:01:27) Sorry, can’t move. I had a blackout and I’m still hiding in the corner!
    (02:01:27) 3 trips more..
    (02:01:27) Sorry, can’t move. I had a blackout and I’m still hiding in the corner!
    (02:01:27) 2 trips more..
    (02:01:27) Sorry, can’t move. I had a blackout and I’m still hiding in the corner!
    (02:01:27) Sorry, can’t move. I had a blackout and I’m still hiding in the corner!
    (02:01:27) 1 trip more..
    (02:01:27) Sorry, can’t move. I had a blackout and I’m still hiding in the corner!
    (02:01:27) Destination reached!
    (02:01:27) Blackout while travelling… Good night! <3
    (02:01:27) (NOTE) Blackout switch is triggered.
    (02:01:27) (NOTE) Please save the message log for analysis and restart Miqobot.

    help anyone please?:)

    March 17, 2020 at 2:44 am #20876
    Chevstr
    Chevstr
    Participant
    0
    lazyffxivplayer wrote:

    Im new to this.. and this is what happened when i tried to use ur script without any changes.

    (02:01:25) (SCENARIO) Started:
    (02:01:25) ‘Diadem Fishing’
    (02:01:25) Chapter: 1
    (02:01:26) DEBUG: Name is ambiguous. Count = 3. Grid: ‘Diadem Fishing Grid’
    (02:01:26) Adventure calls! I have to travel far away. (Grid: ‘Diadem Fishing Grid’, Waypoint: 16)
    (02:01:26) Going from 24 to 16 in 6 trips.
    (02:01:26) Sorry, can’t move. It’s dark and creepy around me! I’d better hold my breath, so nobody would find me.
    (02:01:27) Current zone: Unknown (ID 0385)
    (02:01:27) Sorry, can’t move. I had a blackout and I’m still hiding in the corner!
    (02:01:27) 6 trips more..
    (02:01:27) Sorry, can’t move. I had a blackout and I’m still hiding in the corner!
    (02:01:27) 5 trips more..
    (02:01:27) Sorry, can’t move. I had a blackout and I’m still hiding in the corner!
    (02:01:27) 4 trips more..
    (02:01:27) Sorry, can’t move. I had a blackout and I’m still hiding in the corner!
    (02:01:27) 3 trips more..
    (02:01:27) Sorry, can’t move. I had a blackout and I’m still hiding in the corner!
    (02:01:27) 2 trips more..
    (02:01:27) Sorry, can’t move. I had a blackout and I’m still hiding in the corner!
    (02:01:27) Sorry, can’t move. I had a blackout and I’m still hiding in the corner!
    (02:01:27) 1 trip more..
    (02:01:27) Sorry, can’t move. I had a blackout and I’m still hiding in the corner!
    (02:01:27) Destination reached!
    (02:01:27) Blackout while travelling… Good night! <3
    (02:01:27) (NOTE) Blackout switch is triggered.
    (02:01:27) (NOTE) Please save the message log for analysis and restart Miqobot.

    help anyone please?:)

    “DEBUG: Name is ambiguous. Count = 3. Grid: ‘Diadem Fishing Grid’” this means you have three grids named “Diadem Fishing Grid”, so Miqo doesn’t know which one is the right one to use for this scenario. Best to delete all grids and presets with same name and start again or rename them and update the scenario

    • This reply was modified 4 years, 1 month ago by Chevstr Chevstr.
    March 17, 2020 at 6:17 am #20885
    Lyfox
    Lyfox
    Participant
    0
    lazyffxivplayer wrote:

    (02:01:27) Current zone: Unknown (ID 0385)

    You need v1.3.33 if you want to farm Diadem.

    March 17, 2020 at 6:18 pm #20939

    edgedy
    Participant
    0

    Where do we get it?

    March 18, 2020 at 4:31 pm #21013
    Chevstr
    Chevstr
    Participant
    1+
    edgedy wrote:

    Where do we get it?

    Get what? v1.3.33? Here – https://miqobot.com/#get-the-bot

    If you meant my scenario then it’s up the top in the first post in this thread.

    March 21, 2020 at 3:37 am #21093

    Utoplenik
    Participant
    0

    (13:36:12) ‘Diadem Fishing’
    (13:36:12) Chapter: 1
    (13:36:12) Blackout while travelling… Good night! <3
    (13:36:12) (NOTE) Blackout switch is triggered.
    (13:36:12) (NOTE) Please save the message log for analysis and restart Miqobot.
    What am I doing wrong?

    March 21, 2020 at 4:57 am #21094
    LutBot
    LutBot
    Participant
    0
    Utoplenik wrote:

    Check the post above yours.

    Check the post above yours.

    March 21, 2020 at 7:14 am #21097
    PJ
    PJ
    Participant
    0

    i am having issues running this; would love to get it working. Keep getting the blackout switch trigger message and to restart. Have the updated version. any ideas be great! is there a certain start location?

    March 21, 2020 at 7:19 am #21098
    PJ
    PJ
    Participant
    0

    disregard message i figure out what it was; something silly! had the same same as my test grid. my apologies!

  • Author
    Posts
Viewing 15 posts - 1 through 15 (of 24 total)
1 2

You must be logged in to reply to this topic.