Forum Replies Created
-
Posts
-
You can organize everything manually by editing the contents of the presets.miqo file with a notepad.
The .miqo file will be located wherever the miqobot.exe file is located.For example when you open the file you may see:
grid.Palladium Ore
{“description”:”New Grid description”….etc
grid.Raw Imperial Jade
{“description”:”New Grid description”….etcIf you look inside of Miqo you will notice grid presets are also listed in this order.
Copy/paste both lines and swap the order like this:grid.Raw Imperial Jade
{“description”:”New Grid description”….etc
grid.Palladium Ore
{“description”:”New Grid description”….etcNow back in Miqobot, you will see Raw Imperial Jade first, and Palladium Ore second in your grids.
You can repeat this process with any of the other presets listed in the file to order them however you like.It’s a nice trick to hold us over ^_^
I’m sure this is coming with QoL changes in the future, so for now, there is not a simple drag and drop yet. But, yes you can organize everything manually by editing the contents of the presets.miqo file. It’s quite simple and the best part is, you can put things wherever you want them. Alphabetical, DoH organization, etc. I found this very handy for removing things instead of using the Miqo UI to remove…
The file will be located wherever the .exe file is at!
For example when you go into the file you may see:
fishpreset.levelling
{“mooch”:true,”release”:false,”releasehq”:false,”….etc
fishpreset.patience
{“mooch”:true,”release”:false,”releasehq”:false,”….etcIf you look inside of Miqo you will notice Fishing presets are also listed in this order.
Copy/paste both lines and swap the order:
fishpreset.patience
{“mooch”:true,”release”:false,”releasehq”:false,”….etc
fishpreset.levelling
{“mooch”:true,”release”:false,”releasehq”:false,”….etcNow in your Fishing presets you will see Patience first, and Levelling second.
You can repeat this process with all of the other presets listed in this file!Please let me know if you have questions.
I hope this helps ^_^Navigate your cursor down to the item you want and then start scenario.
If you do not do this, it will not purchase the right item!I use the numpad to move the cursor so,
In the scenario you will see:
NUM 0 = Confirm
NUM 4 = Cursor Left
— Adjust these to fit your own keybinds if you need to ^_^Since this is a macro, you must be careful to not move mouse on screen after starting or you can mess up the cursor & scenario.
I tested with 7 items a few times and it seems to work well.
To change amount of items to buy, edit the number after repeatall from 7 to the number of items you want to buy.
25 items example: repeatall(25)Hope this helps you 😀
Sorry for the delayed response!
You need to set Miqo to gather by item name, and not by slot like FTAC specified.
To do this, go into the Gathering tab and select the Zelkova Log preset.
On the left, you’ll see the “Gather by Name” section… and in that section an asterisk. Double click the asterisk and type “Zelkova Log” (no quotes) and hit enter. Now do this again with the new Asterisk below Zelkova Log and type in “Ice Crystal” (no quotes again).
Now Miqo will only gather Zelkova Logs or Ice Crystals on this Grid! She will now pass by the Ephemeral and gather Ice crystals any time it’s up. Hope this helps 🙂After seeing some interest in an automated retainer scenario, I tried my hand at making one and it came out great! This is the first scenario I’ve ever made, so I hope it works well for you!
What I made this scenario do is teleport me to my Estate Hall (FC House) and run to the nearest summoning bell to send my 8 retainers back out to repeat their ventures. The entire process takes a couple of minutes due to the wait times that I in the scenario which keep it from glitching up due to server latency. Edit these at your own risk.
User Reminder
If you have bad latency, this could go terribly wrong, and the scenario could select things in your retainer window that you don’t want it to (ie. Reset Retainer Job) – With this said, I highly recommend watching this scenario run at least half a dozen times before clicking it and walking away. It is very sensitive, and simply clicking on the screen can ruin the process because the cursor will be taken out of the screen, so please use with care.First off, you will need to create your own grid to walk your character to the nearest Summoning Bell from the Estate Hall location (or remove the first chapter of the Scenario and start the Scenario while standing in front of a summoning bell)
Note: If you do this, you must NOT be targeting the Summoning Bell when starting the scenario or else you will mess it up. No target please 😉num0 = Confirm
num4 = Move Cursor Left
num6 = Move Cursor Right
Shift+{up} = Move Cursor Up
Shift+{down} = Move Cursor DownHope you enjoy 🙂
Asuran, would you mind sharing yours if completed so that I can look for ways to improve mine own?
Thanks so much in advance 😀Sorry for the late response Goblin – I’ve been on vacation!
What I meant to say before was that the rotation was working perfectly for dusklight and I plugged in Doman Yellow and Almandine nodes so that I could gather Dusklight and it was working well, but now I know that spearfishing is a much more effective way to get those!
Can’t wait for Miqo to be able to spearfish.
