Search Results for 'fishing'

trying to get caught up on the gathering and crafter relics and am not too well versed in creating scenarios so figured id see if anyone has one.

[NekroParticipant]

* FULL UPDATE IN THIS POST *

Hello again.

So I updated it ( hopefully for the last time now 🙂 ).
I adjusted the grid a little (so get rid of the old duplicates)

New Stuff:
– Reduced Fishing Preset count from 2 to 1
– Reset Fishing hole is in Norvrandt (porting cost reduce)
– Added commented Materia extract (though the scenario doesn’t really increase bonds with gear, so it’s commented as default)

How to use, after import:
– You need to have the folklore book for fishing in Norvrandt
– Have the baits in your inventory (squid strips and versatile lure)
– Use a cast/hook macro and let it be the first “Cast”-Skill on your hotbar* to interrupt your fishing after 10 seconds like so (replace “Cast” and “Hook” with the appropriate skills in your language):

/micon "Cast"
/ac "Cast" <wait.10>
/ac "Hook"

– If you plan to let it go for a long time, you might want to uncomment the repair() line in Chapter 1
– ensure you have enough squid strips in your inventory!
– Start the Scenario

* Miqobot detects the first “Cast”-Skill on your hotbars for usage. It searches for hotbar first and then the slot on the hotbar. So hotbar 1 will always be preferred over hotbar 2. You can place your normal cast and the cast-macro next to each other and switch the macro to be first, if you are using this Scenario.

How to fish longer before reset
There is another Version attached here (double), where it’s changing fishing spot one time, before doing the reset (so fishing two times for 30min). This might be more natural and just works fine aswell. I just duplicated the original Chapter 2 and 3 for this and fixed the general spots, so it doesn’t randomely choose the same spot again, when it’s changing.
If you wish to let it go in another order or to other spots you can adjust it (the comments should provide enough info). Just be aware that the fishing spot you chose for Chapter 2 and 4 have specific fishing angles in Chapter 3 and 5.

Attachments:

You must be logged in to view attached files.

[SayaParticipant]

Lyfox wrote:

Do you have a Quit fishing icon on hotbar? Thats what Miqo needs to put the rod away.

No i did not, i didnt even consider this, i moved it off my hotbar way back then when i got my fisher class.

I hoped it would tell you that it needed that, thanks a lot !

[LyfoxParticipant]

Do you have a Quit fishing icon on hotbar? Thats what Miqo needs to put the rod away.

Hello there,

im quite new with the scenario stuff, but slowly but surely figuring stuff out by looking at some good Scenarios other people did.

I noticed one thing though, whenever i create and write a scenario for fishing, and im done with the fish(60) command and want to teleport to a different location, it just repeats “Why isnt Teleport Icon active?” because the character is still in gathering mode (rod drawn).

How do i exactly disable this so i can just go ahead and move to the next location ?

[PinHeadParticipant]

Here you go & enjoy. As payment please study & analyze the script and look at how it works.

I have created a couple things here:
-Grid
-Fishing Preset
-Scenario

The scripts assumes a few things:
1. You can fly on your mount. If you can’t fly then this is a great opportunity to expand the grid.
2. This uses Cordials.
3. Have some Rat Tails for bait
4. I use Alt+1 for Patience. Since Miqo doesn’t use Patience for the first cast I have a manual key performed to use it.

Titanic Sawfish is only available from 09:00et-15:00et with good weather being Clear & Fair Skies. The script combats this with skipbadweather & AFK/WorkUntil timers. This scenario repeats 9999 times as well. Good Luck as this quest took me months to complete and only did so after I became a level 80 Fisher.

Happy Hunting.

• This reply was modified 4 years, 4 months ago by  PinHead.

Infinite Universal Diadem scenario Botanist 🌱 and Mining ⚒, Gathering profiles will need to be adjusted for your specific gathering needs all nodes are maped out and this scenario inclueds “Self repair” and “NPC repair”, Materia extraction, The diadem auger – x4 ( You can even pick what mobs you want to farm with the list of mobs and thier waypoints below ), Repeat re-joining, and turn in of collectables from the diadem instance.

Ver.37
fixed: Made adjustments to waypoint (193) and waypoint(249) to prevent getting stuck
ADDED TO POST: keybinding setting’s for use of this scenario ⚠ it is needed to work ⚠

I Highly Recommend all new people to this Grid / Scenario to read the entire post at least once

🛑 ⚠ IMPORTANT ⚠ 🛑 Keybindings in the red box’s is needed to work most scenarios including this one

• NOTE:

Please read below for “Jaded island 🏝 issues”
There has been some success with unticking Compass II it will not stop it but people have found it helps to prevent it thank you argonvesher for bringing this to our attention


Dont forget to “DELETE” your ” Diadem: ⚒🌱 ” Grid’s AND Scenarios before you import the new version

Start the scenario outside of the diadem in the ” The Firmament ” this is where the scenario starts and will auto join the diadem

Note: Grid may take awhile to load when ran the first time depends on your systems hardware and performance it is a big grid

FFXIV 5.41 Diadem Monster Drops

you can change the location of the augur to shoot any of thies monsters found in the diadem simply copy & paste the waypoint numbers in the scenario with the numbers for the monsters you want to farm for, the augur will shoot the monsters at the location you choose

Note: it is recommended to place // before any boomTarget(Monster Name) you dont want the augur to target

Monster
waypoint

-Items dropped

_____________________________________________________________________________________________________________________________________
Mining ⚒ –

• Diadem Beast (ENG) | ディアデム・ビースト (日本) | Bête du Diadème (français) | Diadem-Bestie (Deutsch)
  waypoint(531)
-Gold Ore
-Truesping Water
-Bluespirit Ore
-Artisanal Spring Water
• Diadem Ice Bomb (ENG) | ディアデム・アイスボム (日本) | Bombo de glace (français) | Diadem-Eisbomber (Deutsch)
  waypoint(504) / waypoint(503)
-Gold Ore
-Finest Rock Salt
-Mineral Sand
-Bluespirit Ore
-Artisanal Silex
• Diadem Zoblyn (ENG) | ディアデム・ゾブラン (日本) | Zoblyn du Diadème (français) | Diadem-Zobalos (Deutsch)
  waypoint(424)
-Finest Rock Salt
-Truesping Water
-Mineral Sand
-Bluespirit Ore
-Artisanal Primstone
• Diadem Ice Golem (ENG) | ディアデム・アイスゴーレム (日本) | Golem de glace du Diadème (français) | Diadem-Eisgolem (Deutsch)
  waypoint(526)
-Gold Ore
-Truespring Water
-Mineral Sand
-Bluespirit Ore
-Artisanal Ice Stalagmite
• Diadem Golem (ENG) | ディアデム・ゴーレム (日本) | Golem du Diadème (français) | Diadem-Golem (Deutsch)
  waypoint(406) / waypoint(403)
-Gold Ore
-Finest Rock Salt
-Truespring Water
-Mineral Sand
-Artisanal Cloudstone

_____________________________________________________________________________________________________________________________________
Botanist 🌱 –

• Proto-Noctiluca (ENG) / (français) / (Deutsch) | プロト・ノクチルカ (日本)
  waypoint(530)
-White Cedar log
-Wheat Gossamer
-Cotton Boll
-Tortoise
-Artisanal Caiman
• -Diadem Bloated Bulb (ENG) | ディアデム・ブローテッドバルブ (日本) | Bulbe boursouflé du Diadème (français) | Diadem-Blähknolle (Deutsch)
  waypoint(518)
-White Cedar Log
-Primordial Resin
-Gossamer Cotton Boll
-Tortoise
-Artisanal Cocoon
• Diadem Melia (ENG) | ディアデム・メリアエ (日本) | Mélia du Diadème (français) | Diadem-Meliade (Deutsch)
  waypoint(373)
-White Cedar Log
-Primordial Resin
-Wheat
-Gossamer Cotton Boll
-Artisanal Log
• Diadem Icetrap (ENG) | ディアデム・アイストラップ (日本) | Piège-glace du Diadème (français) | Diadem-Eisfalle (Deutsch)
  waypoint(525) / waypoint(529)
-Primordial Resin
-Wheat
-Gossamer Cotton Boll
-Tortoise
-Artisanal Barbgrass
• Diadem Werewood (ENG) | ディアデム・ウェアウッド (日本) | Arbre-garou du Diadème (français) | Diadem-Ebenhöh (Deutsch)
  waypoint(375)
-White Cedar Log
-Primordial Resin
-Wheat
-Tortoise
-Artisanal Raspberry

you can make thies changes in the following chapters: 6, 9, 12, and 15 just replace the numbers with-in the “()” of waypoint(###) with the numbers for the mob you want to kill

Note:
scenario “The Diadem: ⚒ with collectable turn in’s” will “only target Mining ⚒ mobs” from the above list

scenario “The Diadem: 🌱 with collectable turn in’s” will “only target Botanist 🌱 mobs” from the above list

scenario “The Diadem: ⚒🌱 with collectable turn in’s” and “The Diadem: ⚒🌱” will “target all of the mobs” from the above list

scenario “The Diadem: fishing 🎣 Levelling” is for leveling your fishing it has collectable turn in’s and auto desynthisis of the fish, by default the sceanario uses Butterworm its a level 20 bait can be bought inside the diadem at the repair vendor please stock up on this bait as it is the best for leveling in the diadem and the fishing scenario will get stuck if it runs out of bait

• thank you Lyfox for this quick fix i did make a change to it though to randomewaypoint() becuse i figured SE might get suspicious of a bunch of gathers going to the some location 😂 this fix is only needed if you have issues with the oddly specific jade the fix is below:

replace gather(40) in chapters 5, 8, 11, and 14 with the below text

gather(18)
randomWaypoint(578,282,24,184,284)
gather(22)

🛑 ⚠ IMPORTANT ⚠ 🛑 PLEASE READ EDITING GATHERING PRESETS:

This scenario is frendly to all levels you need only to change the items in the gathering presets remove the names in the gathering presets and use the gather by slot # for leveling as it can be quickly and easily changed as levleing please do this for both the Botanist 🌱 and Mining ⚒ presets the named items in the presets are only for if you want to gather set items like if you intend to make something via crafting and you need materials or if you want to farm for a set item or items that sells for good Gil on the market bored, the below pictures will show you how to add and change items in the preset for the example below its showing you how to add “Approved Grade 3 Skybuilders’ Umbral Levinite”

1.go to the preset you want to edit

2. (Optional) copy and pasteing item names from game

3. How to add or remove items from the list 📃 to remove an item double click on the name of the items in the Gather by name list and when it highlights the name delete it to remove it then click off of the list or hit enter and do this till all unwanted names are removed from the list it is recommended to keep the special weather items on the list as they are always slot 1 and miqobot can get stuck trying to hit an empy slot in the chance that it goes to a special weather node ( with out human interaction it is rare but it dose happen to sometimes go to the special weather nodes for details on how to do this manually please visit the Original post here )

4.farm by slots and how the list works

5.besure to click on the overwrite button 🔳 as shown below to save it and you have to click this for both the Botanist 🌱 and Mining ⚒ presets to save them

• This topic was modified 4 years, 3 months ago by  r51093.
• This topic was modified 3 years, 5 months ago by  r51093. Reason: added info for editing gathering presets
• This topic was modified 3 years, 5 months ago by  r51093. Reason: Made adjustments to `waypoint (529)` to try to prevent getting stuck on world objects when useing `The Diadem Auger`
• This topic was modified 3 years, 5 months ago by  r51093. Reason: added info for the "Jaded island 🏝 issues"
• This topic was modified 3 years, 5 months ago by  r51093. Reason: i just added all the monster names for the different languages in the monster list section till i can make scenarios for different languages you will have to add the names manually for your language client settings
• This topic was modified 3 years, 4 months ago by  r51093. Reason: keybinding setting's for use of this scenario ⚠ it is needed to work ⚠
• This topic was modified 3 years, 2 months ago by  r51093.
• This topic was modified 3 years, 2 months ago by  r51093. Reason: sorry i some how failed to export the senario XD

Attachments:

You must be logged in to view attached files.

[LyfoxParticipant]

pagonis wrote:

Do I need to stop the bot or at least pause to check and uncheck the options?

No need to pause. You can switch settings on the fly.

pagonis wrote:

Is there a scenario for ocean fishing? or a more recent guide?

Not that i know of. The guide above is relevant and totally working.

[pagonisParticipant]

Is there a scenario for ocean fishing? or a more recent guide? I am very inexperienced in fishing so I really don’t know where to start…

[malarkeyParticipant]

This is an older thread and Miqo has updated her fishing scenario options since then. Now, Fisher’s Intuition buff and Spectral Currents weather both are functions in the scenario builder that can be automated.

[pagonisParticipant]

Yesbot wrote:

I managed to get the mount and minion with help of Miqobot but this method still needs a player to monitor and make adjustments as necessary. Here’s what I did:

– Use only 1 kind of bait for each area.
Krill for The Southern Strait of Merlthor
Ragworm for The Northern Strait of Merlthor
Plump worm for Galadion Bay and Rhotano Sea
– Use “patience” fishing preset in Miqobot and check use cordials then start fishing.
– When you proc Fisher’s Intuition check “chum” then uncheck when the buff expires.
– During Spectral Currents, check “double hook” then uncheck when the buff expires.

If anyone has more tips for a better chance of getting more points feel free to add a comment.
I hope this helps and good luck!

Do I need to stop the bot or at least pause to check and uncheck the options?

Hi All,

My Miqobot appears to be missing default presets when I first open it up.
On your help section for fishing, it says there are “levelling”, “patience” etc.
I can only see Pterodactyl(HQ) & Steel Coins.

Could somebody please assist me in getting those defaults back?

Thanks a lot!

[AnachorParticipant]

Thanks for all the tweaks, it works perfect now! Finally! I’am so glad 🙂
It seems also that i delete the quit fishing button for some reason..now everything works perfect, thanks for your help!

[EvadudeParticipant]

That is odd, It has never never done that to me at all, Lets list some possible factors in this.

1. Did you update Miqobot to V1.3.37?
2. Have you tried deleting the app and re downloading it?
3. Do you have every Icon for fishing in your hot bar?
4. Do you have 1 monitor and run anything over the game? that could mess with it sometimes. With 2 monitors I leave the game running on one and run everything else on the other.

Also, I kinda tweaked my scenario and grid. Here are the files along with the fishing preset be sure to delete the previous ones. Tested and observed for 8 hours with no error, But I could say the same for the previous files I posted.

• This reply was modified 4 years, 6 months ago by  Evadude.

Attachments:

You must be logged in to view attached files.

[LyfoxParticipant]

Do you have a Quit fishing icon on hotbar? Thats what Miqo uses to cancel it.