[r51093Participant]

grazingtv@gmail.com wrote:

ok can some one help im sick of running the 53 dungeon so slow does this have something for higher level built in if so how do i import it to miqo? thats bit i seen notepad file but is it 1 line per or how do i import it ? into scenerio?

I know how you feel it is vexing and feel’s extremely slow but as far as XP goes its the best Miqobot can do for leveling your toon with squadrons and it is a long grind but sadly squadron’s are not available in level 60+ dungeons’ and we are lucky we got Trust for the level 70-80 ones XD Miqobot will not que for a normal dungoen as it will leave you extremely vulnerable to people finding you your botting and getting baned my recommendation is if you want to do a higher level dungoen for more XP que and run the dungoen with combat assist turned on and manually move your toon ( ⚠ WARNING ⚠ please make sure your turn off auto pull on the combat assist this is not a good idea to leave on unless your a tank and turn off dashes and back steps this could be really bad for your toon please use them manually and situationally)

[r51093Participant]

double post XD, god im bad at this please see below 😀

[r51093Participant]

Sorry i check the forum’s as often as i can.
This is going to be a long post to answer your questions sorry about that

lostmybacons wrote:

I’ve loaded in the Scenario. I’ve noticed that it will start up by attempting to repair my gear, then entering Diadem, then repairing again, then repairing at the NPC.

it sounds like you might be running an old version of the grid/scenario it should only do repairs after joining the diadem once is a manual repair ( you do it your self if you have the dark matter and the crafting level ) and then at the NPC repair in the diadem

lostmybacons wrote:

It just sits like this scanning every 5 minutes or so until I eventually get kicked out for AFK. What can I do to keep my gathering going?

yes this requires compass 1&2 to be checked and active though it should be by default

lostmybacons wrote:

That just leaves trying to figure out how to incorporate some skills (Bountiful Yield & Kings Yield II) into this, if possible. It would just be nice to use up some GP when available and gathering more items per node occasionally.

In the gather by name section any item names in the {} brackets will only have GP used on them specific item’s you have to either remove the {} from around an item’s name in the gather by name section or rename the items to what you want this is for specific farming when you want miqobot to actively use skills on items you really want the most

This scenario is frendly to all levels you need only to change the items in the gathering presets remove the names in the gathering presets and use the gather by slot # for leveling as it can be quickly and easily changed as levleing please do this for both the Botanist 🌱 and Mining ⚒ presets the named items in the presets are only for if you want to gather set items like if you intend to make something via crafting and you need materials or if you want to farm for a set item or items that sells for good Gil on the market bored, the below pictures will show you how to add and change items in the preset for the example below its showing you how to add “Approved Grade 3 Skybuilders’ Umbral Levinite”

1.go to the preset you want to edit

2. (Optional) copy and pasteing item names from game

3. How to add or remove items from the list 📃 to remove an item double click on the name of the items in the Gather by name list and when it highlights the name delete it to remove it then click off of the list or hit enter and do this till all unwanted names are removed from the list it is recommended to keep the special weather items on the list as they are always slot 1 and miqobot can get stuck trying to hit an empy slot in the chance that it goes to a special weather node ( with out human interaction it is rare but it dose happen to sometimes go to the special weather nodes for details on how to do this manually please visit the Original post here )

4.farm by slots and how the list works

5.besure to click on the overwrite button 🔳 as shown below to save it and you have to click this for both the Botanist 🌱 and Mining ⚒ presets to save them

lostmybacons wrote:

Did you ever find a solution to this?

I’ve put the “Miner” and “Botanist” icons on my Hotbar 1, and tried 2 as well. Apparently before I can start the Mining/Botany scenario, I need to have the Miner/Botanist icons on my hotbar. Doesn’t matter where on my hotbar they are located, it just tells me the same thing over and over.

I have never had this issue before but here is a posible fix do you have any hotbars that are shared cross all of your class?
if so please make sure the mining and botanist job icons are on this hotbars ( the ones that are shared cross all your class its possible while changeing class and reloading the hotbars that miqobot is not able to see the icon during the hotbar loading phase ( ⚠ WARNING ⚠ be warned though when you make a hot bar cross class the game will clear that entire hotbar of all icons for all class that use that specific hot bar and start fresh)

lostmybacons wrote:

I wish I could edit my post.

You can shortly after makeing a post you can edit it with the edit option at the top of your post for a set duration

• This reply was modified 3 years, 2 months ago by  r51093. Reason: Sorry i check the forums as often as i can :D

Attachments:

You must be logged in to view attached files.

[r51093Participant]

marct wrote:

It was exactly that, I didnt have the Duty Action 1 on the hotbar. Also on the fishing, is it setup to fish anything that earns skyward points still or not?

Almost everything in the diadem earns you points, how ever this fishing 🎣 grid/scenario “is not set up for maximized points” it was only setup for leveling your fishing

[r51093Participant]

marct wrote:

I might have missed a step, it seems that when using this, my character doesnt use the weapon to empty out the compressed aether guage?

Dose Miqobot give you any errors in the output box? (the text box is at the bottom of miqobot this is helpful in diagnosing almost all issues with in Miqobot)

Also please make sure you have to have the Duty Action 1 on your hot bars, It will turn into the Auger Action for shooting it after you join The Diadem

[r51093Participant]

km125 wrote:

This thing is amazing!

I am curious – using it right now with ranged DPS – but does miqobot offer support for healer/tank jobs? How do you adjust the squadron before it runs then, since the makeup will not be right (or will you not be able to if there isnt 1 tank/1 healer/2 dps?

to set up the squadrons for a different role you need to first manually que once as that role you can leave the instance as soon as you load into it if you like or you can use the next button and skip lines in the scenario till it gets to the squadron que part miqobot will realizeyour already in the instance and will pick up from where ever you are in the instance (beginning, middle, or near the end miqobot dont care she will start from anywhere in the instance) this adjustmant is only needed if you change roles and yes you are right party makeup has to be 1 tank 1 healer and 2 DPS miqobot wont set them up for you.

When you get into the level 70-80 dungeons (Trust’s) then the game will auto select the NPC’s to fill the party based on what ever role you are

[r51093Participant]

accidental double post please see below

[r51093Participant]

km125 wrote:

Is there any way to work in Using Survival Manuals when it expires? Using this for leveling first…

the scenario uses food 🍲 once at the start of the scenario on Hotbar 3 slot 1 open your hud layout and find hotbar 3 and palce the “Survival Manuals” in the first slot of the hotbar (top left side) this will tell miqobotto use this item, it is only used at the start of the scenario becuse it is hard to predict 🔮 when the food/items will expire and not overlap with previous versions as it can take a longer or a shorter amount of time to gather the nodes depends on when/where they spawn and if any of the specials are active like +5 integrity

[r51093Participant]

Edib wrote:

I’m having a weird issue, the miner diadem scenario uses my gp skills for yield increase absolutely fine but when It switches to botanist or I use the botanist only scenario, it doesnt use any of the skills even though they are on the hotbar. I have my hotbar set up the exact same layout as miner (with the class specific skills for botanist) so Im confused why the scenario isnt using any skills to increase the node yield.

this could be a few thing’s

Check your gather by name items; items with this {} around an items name will prevent miqobot from useing GP on any item that dont have the {} simply delete this around the items name
Please make sure rotations is selected and that the right roation is selected form the drop down menu



besure to click on the overwrite button 🔳 as shown below to save it

Attachments:

You must be logged in to view attached files.

[r51093Participant]

raosien wrote:

Soo all my keybinds are default, and I place my character inside the Diadem before starting.
I have all the needed actions on my hot bar too ( duty action, materia etc)

this scenario starts the diadem for you all you need to do is go to the firmament and start the scenario it has a separate portion of the grid to navigate to the mission commaner as long as you are at or near the entrance to the firmament

[r51093Participant]

Syndair wrote:

My char has stopped using kings yield II on yield+2. I stay cap gp through a whole loop to return(). Added image for clarification.

in the gather by name section you need to remove the {} this around an items name will prevent miqobot from useing GP on any item that dont have the {} simply delete this around the items name and all will be fixed

Syndair wrote:

Is there anyway to set king yield II for the gather yield +5 node?

there is currently no way to set up miqobot to only use the GP on them specific nodes as miqobot dose not look at gathering node’s special effects

Syndair wrote:

it had me initially gathering slot 1 2 3 4 etc. I was just curious if there was a reason for that?

what was on the gather by name when imported is a list of items that were selling good on the Market Board on my server honestly i was just to lazy/forgetful to remove them my self before uploading the scenario

Syndair wrote:

get rid of everything in gather by name except Umbral and then I gathering by slot 4 for all the grade 4 artisanal stuff. So I can craft it. (This would also be the best point no?)

to make items for crafting you will also most likely need items from other slots best thing to do is look at what you want to craft and add them specific items to the gather by name, only down side to the gather by name is that if a node drops two items you need it will always farm the item at the top of the gather by name list

[r51093Participant]

raosien wrote:

I changed the gathering preset to only gather cotton boll and switch since my botanist is only lvl 50…. however when I start the scenario I still see it go for this wheat thing? and I see it try to gather the lvl 60 and 80 crafting materials. it seems its random on whether it wants to go for what I want or not.

Is there anyway to make it ONLY gather cotton bolls and switch’s? I went back through this thread and on page 42 I saw you showed someone how to do it but I followed that and the scenario thing doesn’t seem to want to listen.

raosien wrote:

solved

glad it was figured out 😀 if you have any further questions please let us know

[r51093Participant]

I currently have several ARR grids they are personal grids and as such are incomplete I tend to make grids in zones and for node’s as the need for it arises but this could be a starting foundation for anyone wanting to pick this up and make them complete grid’s below is a list of the grids in the .txt

Attachments:

You must be logged in to view attached files.

[r51093Participant]

Zaylin wrote:

New to this, for some reason on Chapter 2 when it selects to go into Diadem is hits No. How do I fix this?

for this part miqobot uses the send key function this is a very fragile process that requires 1 of 2 things to work with out an issue but its the only way to auto re-enter into the diadem

1. the game needs to be minimized if your running the scenario while working on your PC with the game minimized mouse 🖱 movements and keyboard ⌨ input will not interfere with the scenario
OR
2.the mouse and keyboard needs to not be touched at all while in this phase even a mouse movement can and will interrupt the send key process ( if game is not minimized as is recommended in step 1. )

if the above dose not work or if you already do as it says then you can try this

In chapter 3 change line 13’s key(num0, 2) to this key(num0, 4) this will make Miqobot wait 4 second’s instead of 2 second’s before it hits the next key some PC’s may need a longer wait time between slecting the keys and when the duty pop’s please let me know if any of thies work or not 😀

Zaylin wrote:

So I’m using this scenario and I can’t get it to regularly select slot 3, sometimes it selects 1 or 4 any ideas?

I have slot 3 chosen on the Gathering tab

please use this post to reference how to clear the gather by name items ( please see step 3. in the post )
https://miqobot.com/forum/forums/topic/infinite-universal-diadem-scenario-botany-and-mining/page/42/#post-31923

Attachments:

You must be logged in to view attached files.

[r51093Participant]

Meowthqq wrote:

On the latest scenario file it gets stuck on

waypointPrecise(442)
vangle(-0.4)
angle(-0.23)

does miqobot give any error’s? next time this happens can you send the info from the output box of miqobot?

Meowthqq wrote:

(step 2)

step 2?

Meowthqq wrote:

just runs and jumps against the wall directly in front of the Mission Commander

Are you useing the right grid? make usre that you are deleteing any old grid versions you may have of this scenario before importing

Meowthqq wrote:

AND if i skip this step and start on step 4 the scenario talks to the mission commander but only selects the third option continually.

this could be a key binding issue please make sure your numpad is set to the defult keys (num4 move cursor left ), (num2 moves cursor down), (num6 moves cursor right), (num8 moves cursor up), and (num0 confirms/selects)

[Author]

Posts