[r51093Participant]

Grid update for the diadem with another chapter in the scenario this chapter will take you to the diadem NPC all you have to do is enter the ferment and start the scenario miqobot will go to the NPC and start the diadem farming io have waypoints in the ferment to the most traveled places so you can be almost anywhere in the entrance, at the ishguard restoration turn in vendor or at the scripts vendor the chapter will take you to the diadem NPC and it will face the NPC for interaction, also i noticed some waypoint issues after i cleaned it up (mainly with the auger waypoints for killing the mobs) i also took care of those, any issues or concerns please let me know and thank you 😀 also attached is my settings for the numpad keys your selcome to change them or use them as is the picure showes you what key dose what in the bindings

Attachments:

You must be logged in to view attached files.

[r51093Participant]

Falbium wrote:

im getting an error on the new grid
(11:25:53 PM) Adventure calls! I have to travel far away. (Grid: ‘The Diadem ⚒🌱’, Waypoint: 457)
(11:25:54 PM) Going from 86 to 457 in 11 trips.
(11:25:57 PM) 11 trips more..
(11:25:59 PM) 10 trips more..
(11:26:05 PM) 9 trips more..
(11:26:12 PM) 8 trips more..
(11:26:13 PM) 7 trips more..
(11:26:17 PM) 6 trips more..
(11:26:21 PM) 5 trips more..
(11:26:25 PM) 4 trips more..
(11:26:30 PM) 3 trips more..
(11:26:36 PM) 2 trips more..
(11:26:48 PM) 1 trip more..
(11:26:48 PM) Destination reached!
(11:27:04 PM) Sorry, can’t dismount() – TIME OVER! (15 sec)

thank you i am looking into this now

its odd because i had to force this error at the waypoint only thing that causes it to do that is if it tries to land on the edge of the log i lowered the waypoint to the ground i hope this fixes the problem

• This reply was modified 4 years ago by  r51093. Reason: grid update

[r51093Participant]

whodoyouthinkiam wrote:

May I know what are the num key binds?

I got stuck at the beginning on page 1.

i could be wrong but im almsot fairly certain the num pad butions are the default ones but here is a picture for reference

Attachments:

You must be logged in to view attached files.

[r51093Participant]

Arc wrote:

You have to change the slot in both the “Mining ⚒” as well as the “botanist 🌱” preset and save on both.

I however am constantly getting this, with the scenario crashing, after a while of running it:

(21:00:19) Going from 35 to 32 in 3 trips.
(21:00:23) 3 trips more..
(21:01:15) Oh noes, I couldn’t reach the destination in time. I guess I’m stuck here. 🙁
(21:01:15) Time/Estimate: 52.4262/52.4086
(21:01:15) I got lost in woods, and there are creatures around me, and I can’t find way back home… Falling into oblivion.
(21:01:15) I got lost in woods, and there are creatures around me, and I can’t find way back home… Falling into oblivion.
(21:01:15) I got lost in woods, and there are creatures around me, and I can’t find way back home… Falling into oblivion.
(21:01:15) 2 trips more..
(21:01:15) Sorry, can’t move. I got lost in the woods, and I can’t find way back home.
(21:01:15) 1 trip more..
(21:01:15) Sorry, can’t move. I got lost in the woods, and I can’t find way back home.
(21:01:15) Sorry, can’t move. I got lost in the woods, and I can’t find way back home.
(21:01:15) Destination reached!
(21:01:15) Sorry, can’t move. I got lost in the woods, and I can’t find way back home.
(21:01:15) Poking creatures in the woods… Good night! <3
(21:01:15) (NOTE) Kill switch is triggered.
(21:01:15) (NOTE) Please save the message log for analysis and restart Miqobot.
(21:01:15) Poking creatures in the woods… Good night! <3
(21:01:15) (NOTE) Kill switch is triggered.
(21:01:15) (NOTE) Please save the message log for analysis and restart Miqobot.

i made some modifications to said waypoints and think i fixed the issue i had missed a gathering node near waypoint 32 that was over the branch limit for the waypoints so it was picking up that the nearest node was near waypoint 32 but unable to actually get there becuse there was no branch ( waypoint close enough ) to get there so i made a connecting waypoint and also took notice that the tree branch near waypoint 35 is solid and would someitme run into it so i made a way point to go around said tree branch

here is the fixed version

• This reply was modified 4 years ago by  r51093. Reason: Cleaned up the grid removed about 100+ usless waypoints and added more connections

[r51093Participant]

intresting thank you i will look into this

• This reply was modified 4 years ago by  r51093.

[r51093Participant]

kumaku wrote:

thx and uh I have a new question again, how to repeat joining a new diadem instance after the previous one ended?

once the sencario is started it will repeat on its own untill you stop it manually sorry for the delay in the response the repeat is set for 9999999 repeats so it would have to be running for a really long time before it stops on its own, it needs to be stoped manually or it will just keep going for days XD

[r51093Participant]

I very much agree a pause feature would be amazing not just for gathering but for instance i have been running squads and trust alot ( fastest way to level as a DPS in my opnion) and i use Miqobot for it but i would get asked a question in chat or someone would say hi to me and i would have to stop my scenario just to say hi and let it restart back form the beginning and lose count of my repeatchapter sequence the squad/trust feature needs a pause option much like the combat assist has i cleared all my chat reply keybindings so the only way for me to activate my chat window is by either hiting / or the enter key i know this is probably in the quality of life update (the one at the end of all the other updates) but i honestly for one cant wait for it

[r51093Participant]

here is a simple log out scenario it needs the use of a macro though
with this logout scenario simply place the logout macro on hot bar 4 slot 1 and at the end of your given scenario miqobot will click the macro and start logging out now this Scenario is not 100% im still working out some issues where miqobot misses a send key comand but it will log you out at the end of the scenario this logout sequece dose not work with the “repeatall” command and it needs to be in its own chapter at the end for the “repeatchapter” command to work i hope i made the explanation simple enough it sounds like a lot i know but it is worth it for the self logout

the logout macro needed for the logout sequence is as follows

/shutdown

you can even add a simple chat command to the macro with something like this if you want

/fc Im off, good night
/shutdown

i hope this helps 😀

and any refinement to the logout scenario that could improve reliability would be much appreciated, Also i use the simple down arrow icon in the macro selection so i know just by looking at it its my /shutdown macro

Attachments:

You must be logged in to view attached files.

[r51093Participant]

can try makeing a new toon KEYBINDINGS will be defult on the new toon then you can invesigate what num 7 and 9 are assigned to

[r51093Participant]

Lyfox wrote:

Shield Bash is a gcd and a dps loss. Theres no reason to use it over Low Blow.

I wasent so much thinking about useing shield bash over low blow but more like for it to be used when not under a combo and only when/if low blow is on recharge but i guess that could be hard to implement

[r51093Participant]

Miqobot wrote:

r51093 wrote:

Hi can Miqobot detect Macros on the hot bars?

Yes, Miqobot can and does use macros for ground targeting abilities.
Please refer to this section of the guide:
<span class=”d4pbbc-underline” style=”text-decoration: underline;”>[Beta] Combat – Placement Macros</span>

I see thank you and sorry I must have over looked that some how I used the forum search bar and found nothing about macro placements when I did so thank you but dose make me wonder why dose Miqobot use them more? especially for healing Sacred Soil and Earthly Star, i have only ever seen it use Earthly Star max 3 times ever is it just a low priority over other spells / abilitys?

[r51093Participant]

Lyfox wrote:

Shield Bash is a GCD. GCD means global cooldown. You can use only one GCD every ~2.5 seconds. So if you use Shield Bash you cancel out the main GCD combo. What would be the reason behind stunning the enemy without actually killing it?

I see what you mean now thank you for the explanation 😀 .

I was just thinking its an extra stun for interupting enemy abilitys but I guess that is minimal concern when considering that thats one less damaging attack to be added in the DPS rotation

EDiT: Im not new to MMO’s by any means but im also not an expert either lol im a casual player but in my play style I always favor stuning or silencing the enemy over evaiding the attacks when posible so to me it makes sense to have it in rotation I feel you lose more DPS evaiding AoE’s then stuning them but like I said I am no expert and what you said dose make sense when you think about it in a pure DPS rotation its next to useless so again thank you for the explanation 😀

• This reply was modified 4 years, 1 month ago by  r51093.

[r51093Participant]

malarkey wrote:

Yes Miqo can use macros, but afaik she cannot read the content of the macro. If it is a hotbar she can access and as long as the icon is set for a skill Miqo will attempt to use it when she sees fit in her combat sequence for the skill in the macro icon, regardless of what else is in the macro.

Note that right now not all jobs are 100% optimized for all skills up to 80.

i see, i would still like to see some kind of option to use the ground targeting ability’s if posible for people who have them macro’ed i think it could add a whole dynamic to the bots combat capabilities as well as its DPS efficiency.

Lyfox wrote:

Shield Bash is a gcd and a dps loss. Theres no reason to use it over Low Blow.

i see the reson for it not being in the DPS rotation but should it not still be added? to have a stun like that with a fast recharge is perfect for when low blow is on cool down or is there something i am missing?

[Author]

Posts