gregye

Forum Replies Created

Viewing 15 posts - 16 through 30 (of 44 total)
  • Author
    Posts
  • in reply to: [Beta] Scenario Scripting Engine #3378
    gregye
    gregye
    Participant
    0

    My idea (stupid example but you know what i mean)

    If worked out what I wannt in the end so here is the actuall thing 🙂

    chapter 3

    waypoint(2)
    workUntil(18:30et)// time-window about to close so miqo should stop here at 18:30et
    gather(1)
    waypoint(12)
    land()
    gatherTouch()
    waypoint(16)
    land()
    gatherTouch()
    repeatChapter(100)// repeat this chapter until time-window is close

    chapter 4

    //Dravanian Paprika spot at 19:00et
    teleportIF(Falkenhorst)
    job(BTN)
    gatherPreset(Dravanische-Paprika)
    grid(Dravanische-Paprika+Nav)
    waypoint(11)
    gather(1)

    Unless you are lucky and chapter3 line2 lines up perfectly at 18:30et miqo just say “WORK until: 18:30et (4139 seconds)”.

    If I code something wrong pls tell me 😀

    My current workarround would be to count how often she can repeat chapter 3 and work with the number but this is risky and I have to be there from the begining so not optimal.

    What also could help is an aditional argument on repeatChapter for time repeatChapter(18:30et) or repeatChapterUntil(18:30et).

    • This reply was modified 7 years, 6 months ago by gregye gregye.
    in reply to: how to stop stealth? #3373
    gregye
    gregye
    Participant
    0

    Auto stealth turned off in navigation settings aswell?

    in reply to: Take care #3369
    gregye
    gregye
    Participant
    0

    So you had some pause.

    Dunno unless they track how good you are I would say your fc leader reportet you.

    in reply to: Take care #3367
    gregye
    gregye
    Participant
    0

    You sad standart settings.
    I changed mine but there should be a pause every so often right?

    in reply to: Take care #3364
    gregye
    gregye
    Participant
    0

    Unless you farmed for 8-10 hours strait without a pause I guess he reportet you. …

    in reply to: [Beta] Scenario Scripting Engine #3361
    gregye
    gregye
    Participant
    0

    Question for the workUntil Function

    My idea (stupid example but you know what i mean)

    Chapter1
    sit()
    standUp()
    workUntil(08:00et)
    repeatChapter(100)
    Chapter2
    mount()
    dismount()
    workUntil(08:30et)
    repeatChapter(100)
    repeatAll

    So the plan is to repeat chapter 1 till 0800et then switch to chapter 2. I wannt to repeat chapter 2 till 0830et and then swap back to chapter 1.

    Sadly I couldn’t bring this to behave the way I wannt it.

    Has someone an idea?

    in reply to: request noble sage #2801
    gregye
    gregye
    Participant
    3+

    Done!

    Its connectet to Tailfeather so just Port there and you are good to go

    Use truth – Check

    Attachments:
    You must be logged in to view attached files.
    in reply to: A few questions #2789
    gregye
    gregye
    Participant
    1+

    I’ll try to awnser your questions.

    For MGP grind you have the option to Chocobo race. It works beatuifull. We have a lot of racing grids you can choose from, up to r300. If you have a really good Chocobo (pedi9 r300) then thats a great option to grind down the fenrir. 🙂
    What most ppl do is using the Minigames. You have a nice option window to select what Miqo needs to do, including some rng so that you look more like a player and less like a bot. This way you can get around 900 MGP/min with is the most in my opinion.

    I dont really use PotD so I cant give you awnsers there. :/

    So about program your own routine. What you’r talking about is here Called Scenario Scripting. Its WIP atm but next Patch, 1.2.6x, will releas this, acording to the Dev Team. If you ask me, I think its gonna be dam easy. Why? Every thing that Miqo dose is dam easy to use so yea. 🙂

    For you last question: Yea Miqo supports multiboxing, i dont know if you need to buy for every instance.

    Let me give you 3 other things that should help you in your decision.

    First the Comunity and the awesome Miqo team.
    Every one who browses the forum knows how awesome the miqo guys are and how awesome we as a community are.

    Second, Miqo is so dam easy to use and we have almost for every thing that you wannt to gather/mine a grid waiting to be used.

    And third the awesome crafting solver.
    I dont know if you saw something like this before but you just press a cupple buttons and Miqo can craft 4**** stuff like no tomorrow.

    I hope I awnsert most of your questions and helped you a bit. Ohh and sry for my bad english 😀

    • This reply was modified 7 years, 10 months ago by gregye gregye.
    in reply to: Gathering Issue #2767
    gregye
    gregye
    Participant
    0

    Are you shure that what you gather is correctly typed?
    Try to put a “0” in Slot-Number. Works for me. 🙂

    in reply to: Patch 3.5 – Miqobot Status #2754
    gregye
    gregye
    Participant
    0

    Just wannt to note that Jobs aren’t recognised. Its really funny if you fish right now. Miqo is constantly trying to sit down and then get up again just to try to sit down after that. 🙂

    Also (that was before the patch) there was some strange behavior in the Crafting Solver, when Miqo has a lot of cp left. Normaly she used to press Steady Hand, Great Strides, Innovation and if no good turns up Observe. But now she uses Innovation and Great Strides until 24-ish CP are left for BB. This even happens if you only need about 1000 quality to HQ.

    Sadly I have no logs to show you atm but I try to get some.

    gregye
    gregye
    Participant
    2+

    Gathering by Name.

    Just place the Itemnames in {Brackets} and you only spend GP on them, not on the boring stuff. 🙂

    gregye
    gregye
    Participant
    0

    There they are 🙂
    I hope so.

    Attachments:
    You must be logged in to view attached files.
    gregye
    gregye
    Participant
    0

    For the Crafting part

    I could not reproduce this occasion. I tried about 7 or 8 crafts but nope, nothing like that. I found another thing which looks strange from a crafter’s perspective.

    Miqo does Steady Hand II and the next step is Comfort Zone. The last stack was 6 steps before so I’m just wondering if this is meant to be that way.
    Second to last (I hope that’s a thing^^) craft Step 25 and 26.

    For the Desynthesis part

    Take your time, it’s not that important right now so no hurry 🙂

    And again thanks for being there and creating such a beautiful thing like Miqo!

    gregye
    gregye
    Participant
    0

    First of all nice Update. You did some really good work. 🙂

    As always a review from me:

    Crafting Solver

    This thing works which is amazing. 10 out of 12 crafts went HQ (RNG sucks sometimes) and the time to process the craft isn’t long so great job there.

    Some things that I want to put in focus:

    -Flawless Synthesis
    Miqo somehow recommend this skill after all stacks are gone and after she pressed Inner Quiet so that’s a bit strange^^.

    -Piece by Piece
    Normally you would cover this with Steady Hand I so it can’t go poof but Miqo just do another one if one went to heaven. I don’t know if I’m wrong there and it’s actually cheaper to do it this way but i still want to point it out.

    -Careful Synthesis II
    I loved the feature that Miqo did this in the end to get some more luck with Byregot’s going on a good but if you uncheck progress first it’s like 9 min to solve the craft. It’s not a real issue but as previous just want to point it out so you guys get some feedback for you masterpiece you created.

    Gathering Rotations

    They work perfectly fine

    Quick side note: One Time a friend told me you could never detect a proc so that way you just have to do this by hand. Well today i can tell him he was wrong^^.

    I see 2 problems for this feature. Let’s start with the small one and yes i know you guys are working on this and it is coming in the future (scenario).

    No to the other one

    I don’t see a way to open a node close it and fly to the next set. Thanks to Gathering by Name she won’t spend gp on stuff but you loose a lot of time by doing this.
    So a way to just open and close a node would be perfect.

    Desynthesis

    Is it possible to detect what crafter need to desynth an item? You could for example detect the phrase “Desynthesizable: Yes /culinarian”.
    That way you can simply say desynth everything for CUL and miqo would start on all fishes.

    Else as usual this feature works perfectly fine for me.

    So to complete this: You guys are the best and I love you <33

    in reply to: Request: Disable Event Completed Window #1936
    gregye
    gregye
    Participant
    0

    I absolulty love this feature.
    Imagin you craft 20x 60*. That takes about 20 min. Now what do you do in the time? Watch some videos play a round FFXIII or just work on Desktop. This Notification puts itself in the foreground and you know Miqo is done. Same with 50min fishing seassions. So pls never remove this.

Viewing 15 posts - 16 through 30 (of 44 total)