Forum Replies Created
-
Posts
-
Yes, OH I just realized, does it matter if I am on controller vs kb/m?
yooo I didnt think about that. Did you you have on kb/m settings before running miqo? if not, try having it on those settings.
Why does it keep giving this error?
I’m using the Island Sanctuary – Ultimate one. It walks around quite a lot and then gives this error and also the dismount error:
Sorry, can’t mount – no mounts found on hotbar 🙁
Thats strange. To be sure, do you have a mount on your hotbar?
i’m trying to do the logs and branches one, and i’m getting stuck on a rock here
waypoint(40)
gather(1)
waypoint(48)
gather(1)48 to be exact, coming from 40
i’m using the most recent shared island-all-1.txt
Ok so it turns out I have 2 Island all grids lol please try this one
im still getting this problem even with the revised one, it just gets stuck on a rock and stops. otherwise the profile is amazing, thank you very much.
see if this helps
It happens on chapter 18, which is using Grid Cotton from the previous chapter. I was able to fix it locally by changing the unidirectional of the connection between 8 and 10.
I thought I fixed it lol Im pretty sure I shared an updated one at some point. My bad for not thinking about it.
Having an issue with flying grid! For Salt section on chapter 15! places u near a rock and tries to go up rock where item is. Might u have time to edit this perhaps? On chapter its at gather 4 section after waypoint 2, and with navigation points its waypoint 13 looks like
thank u for checking up on these posts so we can help make it better 😀
Try this
Thank you for this! Is there a way to set it up to only gather a specific thing?
Yes, its I made a revised template a few comments up. there should be pictures near the beginning of this post to use regarding what waymark and material needs to be gathered.
I ran into the same issue. Was not alt-tabbed, minimized or anything. I also noted Miqo giving an error:
[code](1:10:23 PM) Sorry, can’t find path sequence from 3 to 0 🙁 Maybe grid is not connected?
(1:10:23 PM) Sorry, but I can’t find the way to the next trip :([/code]I think the issue is the path between 8 and 10 is in the wrong direction.
Strange, can you tell me which chapters and which waypoints?
try adding more of a delay?
you have a few island sanctuary posts which one is your final?Its not out yet 😀
-
This reply was modified 2 years ago by
Evadude.
Maybe have no spaces between the , and next number numbers? example: 8,2
Just tried it and it still has the same issues. I’m thinking this is something on my end or on Miqo.
I took a look at chapter 3 again to see if could get exact waypoint to make it easier its 390> 393 it tries to go thro a rock. Seems to try to attempt this a few times
Found it,made a small change. Hope this helps!
thank u for making the ultimate scenario and sharing it for those of us that other methods just confuse. If have time to look at the bushes(cotton) section, i noticed keeps getting stuck on rocks and the ocean section seems to be unable to jump from the 2 sections of fish.
Thank you! and im sorry to hear that. Can you tell which waypoints it was heading to and from where?
-
This reply was modified 2 years ago by
