orlandodude

Forum Replies Created

Viewing 12 posts - 1 through 12 (of 12 total)
  • Author
    Posts
  • in reply to: [Scenario] Fisher Leveling 70-80 (Deliveries + Leves) #16355

    orlandodude
    Participant
    0

    Am I supposed to have the same hotbar setup as the creator?

    in reply to: Help with preset please #15625

    orlandodude
    Participant
    0

    Traveling to the location made it work fine. Thanks Lyfox!

    in reply to: Help with preset please #15575

    orlandodude
    Participant
    0

    (2:09:14 PM) Switch Control Settings to Legacy Type, please. :3

    I did that after the message. That wasn’t the issue. Gonna try to move to the area Lyfox mentioned.

    in reply to: Help with preset please #15574

    orlandodude
    Participant
    0

    Ruby Price depths is at X:31, Y:29. This grid doesnt have a beacon so you have to navigate there manually. If you want to farm nodes around Tamamizu then you need a different grid.

    I would still recommend trying a guide first.

    I’ll try to get to that this weekend. Between a family and work I barely have any free time. ><

    in reply to: Help with preset please #15568

    orlandodude
    Participant
    0

    I have nodes nearby where the grid starts. I made count 10.

    Here’s a screenshot:

    Miqo Screenshot

    Here’s the log:

    (2:09:14 PM) Switch Control Settings to Legacy Type, please. :3
    (2:09:29 PM) Spearfishing started.
    (2:09:29 PM) Max node count: 10
    (2:09:29 PM) Scanning for shiny gathering nodes like ‘<anything>’ *.*
    (2:10:10 PM) Uh oh, compass is BROKEN :/ I should slow down spamming it.
    (2:10:10 PM) Scanning for shiny gathering nodes like ‘<anything>’ *.*
    (2:10:33 PM) Spearfishing stopping…
    (2:10:33 PM) Spearfishing stopped.
    (2:10:33 PM) Well, you know, I don’t mind continuing it any time! 😉
    (2:10:41 PM) Spearfishing started.
    (2:10:41 PM) Max node count: 10
    (2:10:41 PM) Scanning for shiny gathering nodes like ‘<anything>’ *.*

    • This reply was modified 5 years, 4 months ago by  orlandodude.
    in reply to: Help with preset please #15553

    orlandodude
    Participant
    0

    Looking at the grid, 0, 1, 2, etc all start around the aetheryte and it goes out the ceiling into the water and out to a certain spot… so I THINK it starts by the aetheryte. In a response to the guy posting the fishing script it says you have to have flying unlocked to go out the ceiling so I think I’m starting at the right place. (not 100% sure because I’m a noob)

    in reply to: Help with preset please #15520

    orlandodude
    Participant
    0

    I imported it from here: https://miqobot.com/forum/forums/topic/index-gathering-grids/page/17/#post-10531

    I teleport to Ruby Sea, Tamamizu, and go to Gathering in Miqo, select GRID: FSH-Ruby_Price_Depths, select spearfishing, and click start and this is all I get in the log bog:

    (8:03:35 PM) Spearfishing started.
    (8:03:35 PM) Max node count: 0
    (8:03:35 PM) Scanning for shiny gathering nodes like ‘<anything>’ *.*

    I checked to see if it shows up under scenario and it does not. I also went into the water right outside through the Tamamizu hole that leads into the water (forget what those are called) and hit start there too and same thing.

    I will add that I have flying unlocked too.

    in reply to: Scenario for crafting logs #15228

    orlandodude
    Participant
    0

    Thanks. I’ll give this a try tonight!

    in reply to: Fishing scenario for beginners #13936

    orlandodude
    Participant
    0

    Thanks!

    in reply to: Fishing scenario for beginners #13766

    orlandodude
    Participant
    0

    Yes, not really posting to ask about level 1… so my mistake for even mentioning it.

    However, Gray is correct. I simply want to see a full scenario to edit it so I can learn what it’s supposed to look like in the first place so I can make one for later levels. I’m now level 20 and it turned off at one point because of the protection and I just want to know what it looks like.

    Also, I play on a laptop so I don’t have a full keyboard so it would just help to see what it’s supposed to read like in the first place so I can work on it from a normal starting point and I’m not a guy that ever coded AHK’s or anything like that so kind of lost and would really appreciate the help!

    Thanks again. 🙂

    in reply to: Noobie Questions #13271

    orlandodude
    Participant
    0

    Thanks for the responses!!!

    Is there any way to buy mats for the logs and Miqo go through each item in the log you have items for and it goes through making them, making it kind of auto pilot?

    in reply to: Noobie Questions #13266

    orlandodude
    Participant
    0

    Just read the crafting guide.

    I have a high-end computer so I want to use the auto-solver. So is this basically buy mats and then have the bot craft whatever you tell it to with high success rate? It’s not really an autopilot type thing to level up (buy mats and automatically switch to highest exp item to craft)? If not, that’s fine. Just trying to make sure I understand everything since the post is kind of old.

    Also, just some general questions…

    How long does it take most people on here to go 1-70 on crafts?
    Is there a recommended path to take? I’ve done 1-60 GSM the normal way (logs and leves) and just want to speed things up or level up while AFK/busy.

    • This reply was modified 5 years, 5 months ago by  orlandodude.
Viewing 12 posts - 1 through 12 (of 12 total)