kdumbledore

Forum Replies Created

Viewing 15 posts - 61 through 75 (of 82 total)
  • Author
    Posts
  • kdumbledore
    kdumbledore
    Participant
    0

    Aw, restarting miqobot seemed to help fix the issue. Or at least it’s working now lol.

    kdumbledore
    kdumbledore
    Participant
    0

    O_o Tried the 14th and 16th updates and they’re both activating the kill switch for me…

    (11:16:18 AM) Gathering started.
    (11:16:18 AM) Max node count: 999
    (11:16:18 AM) Scanning for shiny gathering nodes like ‘<anything>’ *.*
    (11:16:18 AM) I see a shiny node at (-714.231384, -48.271660, 271.928802).
    (11:16:18 AM) Poking creatures in the woods… Good night! <3
    (11:16:18 AM) (NOTE) Kill switch is triggered.
    (11:16:18 AM) (NOTE) Please save the message log for analysis and restart Miqobot.
    (11:16:40 AM) Gathering started.
    (11:16:40 AM) Max node count: 999
    (11:16:40 AM) Scanning for shiny gathering nodes like ‘<anything>’ *.*
    (11:16:40 AM) I see a shiny node at (-736.624817, -60.290508, 272.007507).
    (11:16:40 AM) Poking creatures in the woods… Good night! <3
    (11:16:40 AM) (NOTE) Kill switch is triggered.
    (11:16:40 AM) (NOTE) Please save the message log for analysis and restart Miqobot.
    (11:17:02 AM) Gathering started.
    (11:17:02 AM) Max node count: 999
    (11:17:04 AM) Scanning for shiny gathering nodes like ‘<anything>’ *.*
    (11:17:04 AM) I see a shiny node at (-736.624817, -60.290508, 272.007507).
    (11:17:04 AM) Poking creatures in the woods… Good night! <3
    (11:17:04 AM) (NOTE) Kill switch is triggered.
    (11:17:04 AM) (NOTE) Please save the message log for analysis and restart Miqobot.
    (11:17:49 AM) Old presets backed up to: C:\Users\ssaku\AppData\Local\Temp\miqobot\presets039.miqo
    (11:17:58 AM) Gathering started.
    (11:17:58 AM) Max node count: 999
    (11:17:58 AM) Scanning for shiny gathering nodes like ‘<anything>’ *.*
    (11:17:58 AM) I see a shiny node at (-736.624817, -60.290508, 272.007507).
    (11:17:58 AM) Poking creatures in the woods… Good night! <3
    (11:17:58 AM) (NOTE) Kill switch is triggered.
    (11:17:58 AM) (NOTE) Please save the message log for analysis and restart Miqobot.
    (11:18:05 AM) Gathering started.
    (11:18:05 AM) Max node count: 999
    (11:18:05 AM) Scanning for shiny gathering nodes like ‘<anything>’ *.*
    (11:18:05 AM) I see a shiny node at (-736.624817, -60.290508, 272.007507).
    (11:18:05 AM) Poking creatures in the woods… Good night! <3
    (11:18:05 AM) (NOTE) Kill switch is triggered.
    (11:18:05 AM) (NOTE) Please save the message log for analysis and restart Miqobot.
    (11:19:04 AM) Old presets backed up to: C:\Users\ssaku\AppData\Local\Temp\miqobot\presets040.miqo
    (11:19:08 AM) Importing data.
    (11:19:08 AM) -> Importing scenario: ‘The Diadem ⚒🌱’
    (11:19:08 AM) -> Duplicate gathering rotation: ‘Yield +1’
    (11:19:08 AM) -> Importing navigation grid: ‘The Diadem ⚒🌱’
    (11:19:08 AM) -> Duplicate gather preset: ‘Mining ⚒’
    (11:19:08 AM) -> Importing gather preset: ‘botanist 🌱’
    (11:19:11 AM) New presets were imported from the selected files.
    (11:19:11 AM) Scenarios: 1
    (11:19:11 AM) Navigation grids: 1
    (11:19:11 AM) Gather presets: 1
    (11:19:11 AM) Duplicates (skipped): 2
    (11:19:35 AM) Gathering started.
    (11:19:35 AM) Max node count: 999
    (11:19:39 AM) Scanning for shiny gathering nodes like ‘<anything>’ *.*
    (11:19:39 AM) I see a shiny node at (-736.624817, -60.290508, 272.007507).
    (11:19:39 AM) Poking creatures in the woods… Good night! <3
    (11:19:39 AM) (NOTE) Kill switch is triggered.
    (11:19:39 AM) (NOTE) Please save the message log for analysis and restart Miqobot.

    kdumbledore
    kdumbledore
    Participant
    0

    So with the scenario… you start outside the diadem with that number 1 spot and it automatically moves through all the numbers on its own?

    Cause here I totally thought you just picked a number for what you wanted to do and it’d only do the things in that number, i.e. the diadem boom.

    XD still learning so much about about the gathering aspect of miqobot lol, since I just started using it

    kdumbledore
    kdumbledore
    Participant
    0

    Welp, attempting to run it while afk and at work. I know I’ll run into something at some point so we’ll see if I get in trouble or not lol.

    If I do who knows, maybe I can say I stayed up all night and fell asleep at my keyboard while auto running lol. XD

    I’ll head home on my lunch anyway cause by then the timer in the instance will have run out and I need to go back in for 2nd half of work. I’ll download any new updates for that. You guys are working so fast to fix all the issues, thank you for your hard work!

    kdumbledore
    kdumbledore
    Participant
    0

    Hmm.. still getting stuck on that giant tree at x25.3 y33.2

    kdumbledore
    kdumbledore
    Participant
    0

    Another spot at x23.3 y33.0.. I’m trying to jump across a ravine area to get to a node lol.

    in reply to: Infinite Universal Diadem scenario Botany and mining #26205
    kdumbledore
    kdumbledore
    Participant
    0

    x 8.2 y18.5 right at the entrance I’m running into a rock instead again instead of around it. Mwahahaha, I MUST FIND ALL THE SPOTS! Or.. some anyway. :O

    in reply to: Infinite Universal Diadem scenario Botany and mining #26201
    kdumbledore
    kdumbledore
    Participant
    0

    Aaaand another at x10.5 and y17.4. Node is up on top of a ledge area, and you run into the side of the ledge instead of around.

    Oh, I’m running BTN in case the nodes I’m running towards make a difference. Maybe Miner’s don’t run into the same spots I do?

    • This reply was modified 3 years, 10 months ago by kdumbledore kdumbledore.
    in reply to: Infinite Universal Diadem scenario Botany and mining #26200
    kdumbledore
    kdumbledore
    Participant
    0

    Found another one at x 11.6 and y17.5. Another giant rock, trying to reach a node that is behind it.

    in reply to: Infinite Universal Diadem scenario Botany and mining #26190
    kdumbledore
    kdumbledore
    Participant
    0

    I edited my original post to include the coordinates actually, because I realized the screenshot files were too large anyway. I figured they had the coordinates on them, and then you could see it too.

    in reply to: Infinite Universal Diadem scenario Botany and mining #26185
    kdumbledore
    kdumbledore
    Participant
    0

    I just want to say thank you for sharing your navigation grids! You are amazing for all your hard work and then sharing it with the rest of us.

    There are still a few spots I get stuck on every single time I try to reach specific nodes that spawn. EDIT: Instead of screenshots cause file size limit is so small I’ll put in coordinates!

    First one is just a giant rock in the way. When your character lands and then tries to run to the node past the rock it catches on the rock and can’t run around it. x 29.4 y 30.0

    Second one is a higher node. Your character will drop down on the lower level ground, then run into the rock face and attempt to reach the node and you’ll get an error saying you can’t reach the node because it is too high up. x 30 y 26

    There are a couple other spots I’ve noticed but I’ll need to run across them again coordinates.

    • This reply was modified 3 years, 10 months ago by kdumbledore kdumbledore.
    kdumbledore
    kdumbledore
    Participant
    0

    Ooooh you meant upgrade Miqobot itself? I just did but I also randomly get another error from miqobot the program, not any of the botting aspects.

    “Line 46588 (File ‘location on my computer/miqobot_v1.3.40.exe’) Error: Variable subscript badly formatted.”

    Though that doesn’t happen all the time. For example now it’s working just fine! <3 Cause ya’ll are awesome and kept telling me I was being an idiot and needed to update the program LOL!

    kdumbledore
    kdumbledore
    Participant
    0

    I don’t get it to even sorta work, I legit get nothing. Just straight to blackout mode. I tried in gathering tab and in the scenario tab, just.. nothing. T_T Hopefully it gets fixed sooner rather than later.

    (7:46:05 PM) Scanning for shiny gathering nodes like ‘<anything>’ *.*
    (7:46:05 PM) I see a shiny node at (-714.231384, -48.271660, 271.928802).
    (7:46:05 PM) Sorry, can’t move. It’s dark and creepy around me! I’d better hold my breath, so nobody would find me.
    (7:46:05 PM) Current zone: Unknown (ID 03AB)
    (7:46:06 PM) Going from 207 to 247 in 4 trips.
    (7:46:06 PM) Sorry, can’t move. I had a blackout and I’m still hiding in the corner!
    (7:46:06 PM) 4 trips more..
    (7:46:06 PM) Sorry, can’t move. I had a blackout and I’m still hiding in the corner!
    (7:46:06 PM) 3 trips more..
    (7:46:06 PM) Sorry, can’t move. I had a blackout and I’m still hiding in the corner!
    (7:46:06 PM) 2 trips more..
    (7:46:06 PM) Sorry, can’t move. I had a blackout and I’m still hiding in the corner!
    (7:46:06 PM) 1 trip more..
    (7:46:06 PM) Sorry, can’t move. I had a blackout and I’m still hiding in the corner!
    (7:46:06 PM) Sorry, can’t move. I had a blackout and I’m still hiding in the corner!
    (7:46:06 PM) Destination reached!
    (7:46:06 PM) Sorry, can’t move. I had a blackout and I’m still hiding in the corner!
    (7:46:06 PM) Blackout while travelling… Good night! <3
    (7:46:06 PM) (NOTE) Blackout switch is triggered.
    (7:46:06 PM) (NOTE) Please save the message log for analysis and restart Miqobot.
    (7:46:57 PM) (SCENARIO) Started:
    (7:46:57 PM) ‘New Scenario’
    (7:46:57 PM) Chapter: 1
    (7:46:57 PM) Blackout while travelling… Good night! <3
    (7:46:57 PM) (NOTE) Blackout switch is triggered.
    (7:46:57 PM) (NOTE) Please save the message log for analysis and restart Miqobot.
    (7:47:14 PM) Gathering started.
    (7:47:14 PM) Max node count: 999
    (7:47:14 PM) Scanning for shiny gathering nodes like ‘<anything>’ *.*
    (7:47:14 PM) I see a shiny node at (-732.256714, -58.104549, 271.941101).
    (7:47:14 PM) Blackout while travelling… Good night! <3
    (7:47:14 PM) (NOTE) Blackout switch is triggered.
    (7:47:14 PM) (NOTE) Please save the message log for analysis and restart Miqobot.
    (7:47:18 PM) DEBUG: Name not found.
    (7:47:18 PM) GatherPreset: ‘5DP3BTN’
    (7:47:18 PM) GridName: ‘diadem botanist 1’
    (7:47:47 PM) Old presets backed up to: C:\Users\ssaku\AppData\Local\Temp\miqobot\presets004.miqo
    (7:47:53 PM) Gathering started.
    (7:47:53 PM) Max node count: 999
    (7:47:54 PM) Scanning for shiny gathering nodes like ‘<anything>’ *.*
    (7:47:54 PM) I see a shiny node at (-732.256714, -58.104549, 271.941101).
    (7:47:54 PM) Blackout while travelling… Good night! <3
    (7:47:54 PM) (NOTE) Blackout switch is triggered.
    (7:47:54 PM) (NOTE) Please save the message log for analysis and restart Miqobot.
    (7:48:07 PM) Gathering started.
    (7:48:07 PM) Max node count: 999
    (7:48:16 PM) Scanning for shiny gathering nodes like ‘<anything>’ *.*
    (7:48:16 PM) I see a shiny node at (-732.256714, -58.104549, 271.941101).
    (7:48:16 PM) Blackout while travelling… Good night! <3
    (7:48:16 PM) (NOTE) Blackout switch is triggered.
    (7:48:16 PM) (NOTE) Please save the message log for analysis and restart Miqobot.

    kdumbledore
    kdumbledore
    Participant
    0

    Sad day. I was reading a few other people are getting her to work, but that she’ll get stuck sometimes. :/ Heck, I’d be fine with assist mode lol! But nothing for meh but the good ol’ fashioned way. :O Yay streaming…

    kdumbledore
    kdumbledore
    Participant
    0

    I downloaded and installed those files, I can see the lines for the navigation grid… but I’m still getting blackout mode and it won’t do anything. Any advice?

Viewing 15 posts - 61 through 75 (of 82 total)