[DMaxxParticipant]

Ok, I will try the above advice. It always stops here. (4:54:07 PM) Scanning for shiny gathering nodes like ‘Lv60 Unspoiled Mature Tree’ *.*

(4:51:30 PM) I am ‘Botanist’ now! :3
(4:51:31 PM) AFK until: 18:05et (73 seconds)
(4:52:44 PM) Gathering started.
(4:52:44 PM) Max gather count: 2000
(4:52:44 PM) Scanning for shiny gathering nodes like ‘Lv60 Unspoiled Mature Tree’ *.*
(4:52:45 PM) I sense something far away (-486, -168). I want to go take a look!
(4:52:45 PM) Going from 4 to 16 in 6 trips.
(4:52:46 PM) 6 trips more..
(4:52:52 PM) 5 trips more..
(4:53:01 PM) 4 trips more..
(4:53:03 PM) 3 trips more..
(4:53:09 PM) 2 trips more..
(4:53:17 PM) 1 trip more..
(4:53:17 PM) Destination reached!
(4:53:17 PM) Scanning for shiny gathering nodes like ‘Lv60 Unspoiled Mature Tree’ *.*
(4:53:17 PM) I see a shiny node at (-486.177887, -168.813797, 79.903900).
(4:53:17 PM) Going from 16 to 16 in 1 trips.
(4:53:17 PM) 1 trip more..
(4:53:17 PM) Destination reached!
(4:53:19 PM) Selecting slot -> 3
(4:53:20 PM) Using action: (Start)
(4:53:20 PM) Using action: (Clear Out of Reach)
(4:53:24 PM) Using action: (Collect)
(4:53:25 PM) Using action: (Single Mind)
(4:53:30 PM) Using action: (Utmost Caution)
(4:53:32 PM) Using action: (Impulsive Appraisal)
(4:53:36 PM) Evaluating condition: (If DE Procs) – No 🙁
(4:53:36 PM) Using action: (Impulsive Appraisal)
(4:53:40 PM) Evaluating condition: (If DE Procs) – Yes!
(4:53:40 PM) Using action: (Impulsive Appraisal)
(4:53:44 PM) Evaluating condition: (If DE Procs) – Yes!
(4:53:44 PM) Using action: (Single Mind)
(4:53:46 PM) Using action: (Methodical Appraisal)
(4:53:50 PM) Using action: (Finish)
(4:53:51 PM) Hitting that poor node. :3
(4:53:59 PM) Hitting that poor node. :3
(4:54:07 PM) My precious shiny sparkles! (1/2000)
(4:54:07 PM) Nom-nom a 300 GP coridal :3
(4:54:07 PM) Scanning for shiny gathering nodes like ‘Lv60 Unspoiled Mature Tree’ *.*

[DMaxxParticipant]

Yeah, it’s still not continuing for me. I just got done with number 3 and it would not start 4. I have to manually hit next to get it to go to the next scenario. Is there a setting to make the bot go to the next step? Also, I’m using 1.2631

(4:30:36 PM) Using action: (Finish)
(4:30:37 PM) Hitting that poor node. :3
(4:30:45 PM) Hitting that poor node. :3
(4:30:51 PM) My precious shiny sparkles! (1/2000)
(4:30:51 PM) Nom-nom a 300 GP coridal :3
(4:30:52 PM) Scanning for shiny gathering nodes like ‘Lv65 Unspoiled Mature Tree’ *.*

[DMaxxParticipant]

THANK YOU! : ) /backflip /cheer

[DMaxxParticipant]

Thank you for your work : ) I really appreciate it, We are doing PotD right now, but when I’m done I’ll check it out again. It would finish the node and just stand there, and I have to hit the next button. I managed to collect a lot of red scripts though, so thank you. I wish more people would post such awesome scenarios!

[DMaxxParticipant]

Number 4, there is no unspoiled node at 12:05.

[DMaxxParticipant]

Thank you for this! Everything is working great. Is there a way to make this fully automated, going to the next scenario after it completes one?

[DMaxxParticipant]

Where is the collectible rotation? I don’t see it included, or I did something wrong. It works great taking you to all the nodes, but it never starts the collectible rotation.

I did not have all my abilities setup on my bars, it is now working correctly. I will test it out and report back.

• This reply was modified 6 years, 10 months ago by  DMaxx.

[DMaxxParticipant]

BTN Level 63 job quest HQ Popotoes. Gyr Abania, The Fringes SW of Pike Falls

Attachments:

You must be logged in to view attached files.

[DMaxxParticipant]

Your best bet is to not ever do any pvp bottng. It’s a quick way to get reported and get banned. Miqobot works great for doing repetitive tasks, that are just plain boring, but when you step over the line, you are going to get banned. I went over to mmominion to check out their bot because I thought that it was better. The ban posts in the forums is over 101 pages long. If you want to bot just use it correctly and you will be golden.

• This reply was modified 6 years, 10 months ago by  DMaxx.

[DMaxxParticipant]

final62 wrote:

I can not make my own way, yet I saw the video of the guide, I do exactly the same yet it does not work, there should be better explanation

In Miquobot, go to navigation and turn the editor on. The screen will go green around the edges, and a little menu will pop up on the top left of your screen. Some of the commands in the menu will work while the border is green, and some will work when the border is red. To turn the border read, click your control button.

Play with someone else’s grid, remove and add points, click on the fly,mount, foot tags to change them. Hold the mouse button down when the border is red and draw lines to your tags.

I agree that there should be better options for people that can’t do this, but if you take some time, you can do it. Just play around with it, and you will be making your own runs shortly.

[DMaxxParticipant]

Yeah, the zone location would be great, it would be nice if everyone would start posting what zone and area their grid is in.

• This reply was modified 6 years, 10 months ago by  DMaxx.

[DMaxxParticipant]

Yeah,it stops for me as well.

Never mind, after reading the above post and turning on my Compass 1 and 2 plus truth, everything works.

• This reply was modified 6 years, 10 months ago by  DMaxx.

[DMaxxParticipant]

Thank you : )

[DMaxxParticipant]

Its working for me 100 percent, make sure you are in mouse mode, and on a mount maybe?

[DMaxxParticipant]

Can the updated status be placed in the first post? or is it somewhere else?

[Author]

Posts