Forum › Forums › Grids and Presets › Scenarios for leveling Botanist and Miner 52+
This topic contains 80 replies, has 34 voices, and was last updated by Antonkell 4 years, 12 months ago.
-
AuthorPosts
-
March 3, 2019 at 5:06 pm #10966
You are right changed to both now still have 2 problems.
When he starts gathering the node he gathers 1 time till you see what is under the “?” and afterwards just don’t continueing gathering?
After the first round i also got:
(17:48:13) Please put ‘Miner’ icon on your hotbar!
(17:48:13) ERROR (Chapter 2, Line 3): Execution errorDo i have to change class per hand?
Shiney103 asked just the same question before you: https://miqobot.com/forum/forums/topic/scenarios-for-leveling-botanist-and-miner-52/page/3/#post-10703
Put a miner gearset on hotbar like the bot says.March 3, 2019 at 5:27 pm #10967March 3, 2019 at 5:50 pm #10968March 4, 2019 at 12:11 pm #10973March 8, 2019 at 8:08 pm #11038Thanks! Works so far but can you explain this part further?
“the collectables accepted for xp each day change daily, so you will need to look at what is being accepted for collectables that day in game, then go to the “gathering tab” in miqobot and scroll down the bar and find the presets – then simply change the slot number listed.”I know where i can see the list but what do i need to change exactly?
Do i need to click on every item and change “slot” and save it afterwards?
What if it isn’t in the list than to 0?March 9, 2019 at 8:21 am #110491. Select a preset.
2. Change slot number.
3. Click overwrite.For example the scenario is set to collect Dravanian Mistletoe but you see Porcini in your daily Rowenas list. Both items are collected from the same node: http://garlandtools.org/db/#node/341
So in Miqo you select a preset for Dravanian Mistletoe and change slot from 3 to 7.
Iirc theres always at least one collectable from each node accepted so you dont have to worry about 0.March 29, 2019 at 7:02 pm #11374March 29, 2019 at 7:10 pm #11375April 15, 2019 at 3:13 pm #11810Anyone know why it refuses to gather in tailfeather? It moves to waypoint, searches for nodes, then doesn’t do anything. I’ve tried putting it right next to the node and restarting the scenario to see if it recognizes it. I haven’t changed anything in the text or settings. It worked once and now refuses to gather that node.
April 15, 2019 at 10:05 pm #11812Hm. I’m having an issue with Truth not turning on when I swap classes as well. There’s nothing that mentions it in the Miqo log, it just goes through as normal without using it, near as I can tell. On top of that, I teleport/class swap/fly from point to point, but it doesn’t automatically start gathering. I doublechecked my abilities and they’re all on the hotbar (and reachable as far as binded keys), and the log isn’t giving me an error. It’s just blanking out until I hit finish. Any ideas?
April 15, 2019 at 10:26 pm #11815April 16, 2019 at 3:21 am #11817Are there logs other than the window in the bottom of Miqobot itself? Restarting everything seems to have fixed the ‘no gather’ bit, but Truth still doesn’t turn on automatically when I swap classes. It just sits at the ‘AFK until’ stage until I turn truth on. It’s on a hotbar the program can access and selected in the gathering section, as well.
(10:12:58 PM) (SCENARIO) Started:
(10:12:58 PM) ‘Lvl 52+ Miner and Botanist collectable lvling’
(10:12:58 PM) Chapter: 8
(10:13:12 PM) Successfully teleported to ‘Falcon’s Nest’. :3
(10:13:16 PM) I am ‘Miner’ now! :3
(10:13:18 PM) Adventure calls! I have to travel far away. (Grid: ‘Scenario – Yellow Copper Ore’, Waypoint: 5)
(10:13:18 PM) Going from 20 to 5 in 12 trips.
(10:13:20 PM) 11 trips more..
(10:13:22 PM) 10 trips more..
(10:13:25 PM) 9 trips more..
(10:13:27 PM) 8 trips more..
(10:13:30 PM) 7 trips more..
(10:13:34 PM) 6 trips more..
(10:13:38 PM) 5 trips more..
(10:13:43 PM) 4 trips more..
(10:13:48 PM) 3 trips more..
(10:13:53 PM) 2 trips more..
(10:13:57 PM) 1 trip more..
(10:13:57 PM) Destination reached!
(10:13:57 PM) AFK until: 16:05et (181 seconds)
(10:16:57 PM) Gathering started.
(10:16:57 PM) Max node count: 1
(10:16:57 PM) Scanning for shiny gathering nodes like ‘<anything>’ *.*
(10:16:57 PM) I see a shiny node at (314.906586, -11.559290, 102.620697).
(10:16:58 PM) Going from 5 to 4 in 5 trips.
(10:17:01 PM) 4 trips more..
(10:17:06 PM) 3 trips more..
(10:17:08 PM) 2 trips more..
(10:17:12 PM) 1 trip more..
(10:17:12 PM) Destination reached!
(10:17:14 PM) Selecting slot -> 2
(10:17:15 PM) Using action: (Start)
(10:17:15 PM) Using action: (Gathering +50%)
(10:17:17 PM) Using action: (Clear Out of Reach)
(10:17:20 PM) Using action: (Collect)
(10:17:21 PM) Using action: (Discerning Eye)
(10:17:25 PM) Using action: (Instinctual Appraisal)
(10:17:29 PM) Using action: (Instinctual Appraisal)
(10:17:33 PM) Using action: (Instinctual Appraisal)
(10:17:37 PM) Using action: (Hit Once)
(10:17:40 PM) Using action: (Hit Once)
(10:17:43 PM) Using action: (Hit Once)
(10:17:46 PM) My precious shiny sparkles! (1/1)
(10:17:46 PM) Woot-woot!
(10:17:46 PM) I got loads of sparkles in my pockets!
(10:17:46 PM) Guess it’s time to rest for a bit 🙂
(10:17:46 PM) Everything is gathered!
(10:17:47 PM) (SCENARIO) Chapter 8 complete.- This reply was modified 5 years, 7 months ago by Xurtan.
April 16, 2019 at 4:50 am #11821Oh i see now its obvious. You expect to see truth at the wrong moment. Functions like job() and afkUntil() dont turn the truth on. Only gather() does.
And remember Miqo uses 24 hour format. 4:05et and 16:05et are in different chapters. Thats probably why it wasnt gathering. You were looking at afkUntil(4:05et) while it was 16:05 in the game.June 6, 2019 at 10:11 pm #13282June 7, 2019 at 9:42 am #13295I really appreciate the help as well, but how do you know exactly what slot number corresponds with what mineral to collect? That’s the only part I don’t understand.
3d radar > gathering > show out of reach
or alternatively by just using toil once and remembering it, order is 0 to 9 from top to bottom, its simple.
-
AuthorPosts
You must be logged in to reply to this topic.