(Phase 2) Diadem Full

Forum Forums Grids and Presets (Phase 2) Diadem Full

Tagged: , ,

This topic contains 102 replies, has 47 voices, and was last updated by Miqobot Miqobot 4 years, 2 months ago.

Viewing 15 posts - 76 through 90 (of 103 total)
  • Author
    Posts
  • #21615
    Chomosuke
    Chomosuke
    Participant
    0

    Thereโ€™s no download it seems.

    There is: https://miqobot.com/forum/forums/topic/diadem-full/page/3/#post-21072

    shoutout to MVP lyfox, putting in work in the forums.

    #21625

    KnightErrant
    Participant
    0

    Mining:

    (12:02:32 PM) Gathering started.
    (12:02:32 PM) Max node count: 9999
    (12:02:32 PM) Scanning for shiny gathering nodes like ‘<anything>’ *.*
    (12:02:32 PM) I see a shiny node at (227.708298, 504.416412, 87.635963).
    (12:02:34 PM) Going from 41 to 304 in 4 trips.
    (12:02:35 PM) 4 trips more..
    (12:03:27 PM) Oh noes, I couldn’t reach the destination in time. I guess I’m stuck here. ๐Ÿ™
    (12:03:27 PM) Time/Estimate: 51.9381/51.9174
    (12:03:27 PM) I got lost in woods, and there are creatures around me, and I can’t find way back home… Falling into oblivion.
    (12:03:27 PM) I got lost in woods, and there are creatures around me, and I can’t find way back home… Falling into oblivion.
    (12:03:27 PM) I got lost in woods, and there are creatures around me, and I can’t find way back home… Falling into oblivion.
    (12:03:27 PM) 3 trips more..
    (12:03:27 PM) Sorry, can’t move. I got lost in the woods, and I can’t find way back home.
    (12:03:27 PM) 2 trips more..
    (12:03:27 PM) Sorry, can’t move. I got lost in the woods, and I can’t find way back home.
    (12:03:27 PM) 1 trip more..
    (12:03:27 PM) Sorry, can’t move. I got lost in the woods, and I can’t find way back home.
    (12:03:27 PM) Sorry, can’t move. I got lost in the woods, and I can’t find way back home.
    (12:03:27 PM) Destination reached!
    (12:03:27 PM) Sorry, can’t move. I got lost in the woods, and I can’t find way back home.
    (12:03:27 PM) Poking creatures in the woods… Good night! <3
    (12:03:27 PM) (NOTE) Kill switch is triggered.
    (12:03:27 PM) (NOTE) Please save the message log for analysis and restart Miqobot.
    (12:03:57 PM) Gathering started.
    (12:03:57 PM) Max node count: 9999
    (12:03:57 PM) Scanning for shiny gathering nodes like ‘<anything>’ *.*
    (12:03:57 PM) I see a shiny node at (227.708298, 504.416412, 87.635963).
    (12:03:57 PM) Poking creatures in the woods… Good night! <3
    (12:03:57 PM) (NOTE) Kill switch is triggered.
    (12:03:57 PM) (NOTE) Please save the message log for analysis and restart Miqobot.

    #22128

    2skies
    Participant
    0

    Is there a way to make a scenario that uses this grid to say…

    > gather 150 times from node 1
    > gather 150 times from node 2
    > (go until node 5)
    > switch classes
    > repeat steps above

    … for each node?

    #22130

    Kellanved
    Participant
    0

    Hey. Just wanted to stop by and thank you for the awesome grid. I’m fairly new to Miqobot, but thanks to you and the other forum posters, I have been able to get it working pretty quickly. So thanks for the hard work. It’s really appreciated.

    #22240

    askaledd
    Participant
    0

    am i missing something or why cant i find a download link?

    #22241
    LutBot
    LutBot
    Participant
    0

    am i missing something or why cant i find a download link?

    Thereโ€™s no download it seems.

    There is: https://miqobot.com/forum/forums/topic/diadem-full/page/3/#post-21072

    shoutout to MVP lyfox, putting in work in the forums.

    #22273
    iJawa
    iJawa
    Participant
    0

    Hey guys, it’s summer time and school is finally over. I see there were some link problems. I hope that has been resolved as I see lyfox might of done something to make it work. If there are any questions please let me know as I am back to crafting again.

    #22340

    HalfDisabled
    Participant
    1+

    On miner this grid works wonders for me, but on Botanist it seems to break almost constantly! Mostly on spots where you need to be standing on the roots of the giant trees to hit the nodes, like 646 or 689, seen here:

    nodes 646 and 689

    What happens is miqo fails to get to a spot it can hit these nodes and then blacklists them. After that miqo stands there searching for a node nearby but the compass only points her to the blacklisted node forever and eventually I either notice it broke or get disconnected from diadem for inactivity.

    I know without manually adding beacons I can’t fix the blacklist compass loop, but does anyone have any suggestions on how to make nodes like these work consistently? I’ve tried different sized mounts and I’ve tried moving the nodes around a little to see if I can fix the issue myself, but I don’t know any other way to make them work more consistently.

    • This reply was modified 4 years, 5 months ago by  HalfDisabled.
    #22357

    Kylar10
    Participant
    0

    i may be stupid but ive just stared using miqobot and cant work out how to input the grid…any help?

    #22372

    HalfDisabled
    Participant
    1+

    Kyler you download the file, then click Share on miqo, click Import, then find the file in the window that opens and select it. That will load the grid into miqo.

    #22449
    iJawa
    iJawa
    Participant
    0

    I’ll check out MIN today and see whats up. Thanks for the picture.

    #22470
    lostcookie
    lostcookie
    Participant
    0

    Hello.Iโ€™m sorry if you feel awkward speaking because Iโ€™m using a translator
    I used it for the first time yesterday. I use Miner
    There is nothing wrong with gathering, but if you move two or three islands, the character stops. Miqobot is still working.
    Also, there is no error message.

    (12:45:42) Hitting that poor node. :3
    (12:45:50) Hitting that poor node. :3
    (12:45:54) My precious shiny sparkles! (45/999)
    (12:45:54) Scanning for shiny gathering nodes like โ€˜<anything>โ€™ *.*

    If you move manually, it suddenly moves again automatically. Can I know what the problem is? Iโ€™d appreciate your help.

    Attachments:
    You must be logged in to view attached files.
    #22472
    LutBot
    LutBot
    Participant
    1+

    Hello.Iโ€™m sorry if you feel awkward speaking because Iโ€™m using a translator
    I used it for the first time yesterday. I use Miner
    There is nothing wrong with gathering, but if you move two or three islands, the character stops. Miqobot is still working.
    Also, there is no error message.

    (12:45:42) Hitting that poor node. :3
    (12:45:50) Hitting that poor node. :3
    (12:45:54) My precious shiny sparkles! (45/999)
    (12:45:54) Scanning for shiny gathering nodes like โ€˜<anything>โ€™ *.*

    If you move manually, it suddenly moves again automatically. Can I know what the problem is? Iโ€™d appreciate your help.

    You need to enable compass in the gathering tab. Miqo uses game actions, and if she can’t see where the next node is (via compass) then shen won’t be able to move towards it.

    #22476
    lostcookie
    lostcookie
    Participant
    0

    Thank you. I fixed the settings and restarted them, but they never stopped for 10 minutes!

    #22540
    graccichen
    graccichen
    Participant
    0

    Everytime I leave Miqobot to do her own thing in Diadem it seems she gets stuck very soon after

    (1:29:16 PM) Scanning for shiny gathering nodes like ‘<anything>’ *.*
    (1:29:16 PM) I see a shiny node at (51.973339, 623.944275, 100.295403).
    (1:29:17 PM) Sorry, can’t find path sequence from 394 to 373 ๐Ÿ™ Maybe grid is not connected?
    (1:29:17 PM) Sorry, but I can’t find the way to the next trip ๐Ÿ™
    (1:29:18 PM) Ummm. I don’t see any sparkles here ๐Ÿ™
    (1:29:18 PM) Ummm. I don’t see any sparkles here ๐Ÿ™
    (attachment)

    What am I doing wrong?

    I am using the Diadem No Beacon -2 grid and have on both Use Compass and Use Compass II

    Thanks

    • This reply was modified 4 years, 4 months ago by graccichen graccichen.
    Attachments:
    You must be logged in to view attached files.
Viewing 15 posts - 76 through 90 (of 103 total)

The forum ‘Grids and Presets’ is closed to new topics and replies.