[r51093Participant]

spacey wrote:

Wow, that was fast thanks man! Another question, I’m only doing miner for slot 3 items only so I’ve been tweaking things to accommodate that. Mainly I just get rid of the botanist related scrips, delete scenario 9 and have the mining aethergauge mob shooting scenarios repeat instead of it doing botanist ones. Will doing this screw up the navigation at all? or is the getting stuck issue just related to the grid and not the scenario scripts?

nah you should be good the grid and scenario although they work together they are separate things for instance the grid is just google maps 🗺 (roads and locations), The scenario tells miqobot what to find and what to do in the grid / map 🗺 also there are other scenarios that get downloaded with my file there is one labled

“The Diadem: ⚒ with collectable turn in’s” this one focuses on mining and ignores the botanist augur points

and the other one is labled

“The Diadem: 🌱 with collectable turn in’s” this one is a botany only one and will ignore the mining augur points

i hope this helps 😀

Note: there are a total of 4 different scenarios that use’s the same grid here is a list of the scenarios that get imported

r51093 wrote:

well i just learned something new about Miqobot apparently you can export and import multiple scenarios, grids, and presets in one file XD so here you go this attachment has the following scenarios in it

The Diadem: ⚒🌱

this is the original

The Diadem: ⚒🌱 with collectable turn in’s

original with collectable turn in

at the request of multiple people i have also split the scenario for those who want to focuse only mining ⚒ or botany 🌱

The Diadem: ⚒ with collectable turn in’s

Only Mining ⚒ scenario

The Diadem: 🌱 with collectable turn in’s

Only Botany 🌱 scenario

i renamed the scenarios added new waypoints for the augur, and at the request of Breakfast Enthusiast i added the repair NPC in the ferment (NPC is now inside the diedem) for all the scenarios thank you all for your continued suport and assistance with the grid / scenario and as always plese post here if there are any issues 😀

NOTE: all of the above scenarios are in the single attachment below

this symbol ” ⚒ ” is to show that the scenario dose mining

and this symbol ” 🌱 ” is to show that the scenario dose botany

this is a quick way to know what the sceanrio dose at a glance

• This reply was modified 3 years, 11 months ago by  r51093.

[r51093Participant]

spacey wrote:

Not sure if this has been fixed in version 5 (going to run that after I post this and see), but I got stuck at x:11.0 y:27.7 behind a green rock where the node is after a few hours. Not sure where to find the z coord.

Let me know if there’s an easy way to fix these myself and I’m happy to contribute any fixes myself if issues come up again.

I just fixed this please use V6 for the fixed grid

Note: im kinda likeing this version thing makes it simpler

[r51093Participant]

edgedy wrote:

Is 4 the latest version? It’s confusing me.

is there something specific i can clarify on?

Note: latest updates can always be found a the end of the thread on my last post made ( you have to be logged into your account to see the attachemnts) the attachemnts look like the image below and the number on the attachment is the version number you want the attachemnt wiht the highest number on it, i hope this helps 😀

Attachments:

You must be logged in to view attached files.

[r51093Participant]

kdumbledore wrote:

Yup, my boomy boom goes boom finally now that I put that duty action 1 on my hotbar. Though I ended up having to delete the line for extracting materia. It worked once, but after that it hasn’t worked since and it kept breaking the scenario once it got to that point. I was like screw it, extracting materia isn’t hard I can just do that myself every once in awhile!

Not sure why it worked the one time, and then after that suddenly said the button wasn’t on my hotbar anymore. Like.. yup, yup it is. It’s on the first hotbar button -. Silly thing. At least it was easy fix. Now everything is running smooth. Came home on my lunch break (which I’m on now) and my bf said zero problems with the bot while I was afk! Sure enough it was still gathering, and it had auto-entered me back into the diadem after it finished and all that so, it’s all good now that I took that one option off.

nice im glad to hear it 😀 strange about the matera extraction though XD

[r51093Participant]

Lina28011 wrote:

Are your items good for farming gil, or is it better to exchange them for?

the items in the gathering prset are just basic items, things that are in demand for sale or craft vary from server to server and in worlds i left it basic so that you can add in items of your choosing to the gathering list there is no one master list but below are pictures with instructions on howe to add items to the gathering presets

• This reply was modified 3 years, 11 months ago by  r51093.

Attachments:

You must be logged in to view attached files.

[r51093Participant]

r51093 wrote:

EgoTronic wrote:

Somehow my miqobot when i stand in front of the diadem npc and start the scenario. It first run right to the npc to repair then runs back but isnt in range of the diadem npc to select or enter the area. How to fix this? I can only use this scenario when i go into the diadem myself and stand in front of the repair guy of the diadem starter island.
But after the 180 mins are over it doesnt reenter I have to keep going in manually and stand close to the repair npc of the starting island inside diadem to make this work.

i dont know why it does that to some people i will look into this

to fix this issue i moved the repair NPC to the one inside of the diadem so once at the diadem NPC it wont have to move but for when it delivers the collectable’s.

i hope this helps 😀 and as always any error’s, issues, or bugs please post it here and i will work on resolving it as quickly as posible thank you again 😀

Note: I dont know if it’s an issue with miqobot our PC’s or an issues wiht the import/export feature but alot of people have issues where miqobot dose not take them all the way to the waypoint or in some rare occasions sends people in the opposite direction XD i havent personally experinced this issue but alot of people have posted about it so it makes me wonder what the issue there could be

• This reply was modified 3 years, 11 months ago by  r51093.

[r51093Participant]

EgoTronic wrote:

Somehow my miqobot when i stand in front of the diadem npc and start the scenario. It first run right to the npc to repair then runs back but isnt in range of the diadem npc to select or enter the area. How to fix this? I can only use this scenario when i go into the diadem myself and stand in front of the repair guy of the diadem starter island.
But after the 180 mins are over it doesnt reenter I have to keep going in manually and stand close to the repair npc of the starting island inside diadem to make this work.

i dont know why it does that to some people i will look into this

[r51093Participant]

joearny wrote:

heres what im getting when i try to run it

(5:17:27 AM) Sending key: ‘num0’ (Delay: 1.00 sec)
(5:17:29 AM) (SCENARIO) Chapter 3 complete.
(5:17:32 AM) Gathering started.
(5:17:32 AM) Max node count: 40
(5:17:32 AM) Scanning for shiny gathering nodes like ‘<anything>’ *.*
(5:17:32 AM) I see a shiny node at (-579.325073, -234.639694, 34.965820).
(5:17:33 AM) Going from 193 to 249 in 3 trips.
(5:17:33 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:33 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:34 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:34 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:35 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:35 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:36 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:36 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:36 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:37 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:37 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:38 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:38 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:38 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:39 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:39 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:40 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:40 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:40 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:41 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:41 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:42 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:42 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:42 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:43 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:43 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:44 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:44 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:44 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:45 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:45 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:46 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:46 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:46 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:47 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:47 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:48 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:48 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:48 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:49 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:49 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:50 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:50 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:50 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:51 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:51 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:52 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:52 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:53 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:53 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:53 AM) Sorry, can’t mount 🙁
(5:17:54 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:55 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:55 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:56 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:56 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:56 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:57 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:57 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:58 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:58 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:59 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:59 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:17:59 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:18:00 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:18:00 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:18:01 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:18:01 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:18:01 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:18:02 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:18:02 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:18:03 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:18:03 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:18:03 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:18:04 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:18:04 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:18:05 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:18:05 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:18:05 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:18:06 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:18:06 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:18:07 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:18:07 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:18:07 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:18:08 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:18:08 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:18:09 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:18:09 AM) (SCENARIO) Stopping…
(5:18:09 AM) Adventure cancelled… Yet, I’m still full of energy!
(5:18:09 AM) Sorry, can’t mount 🙁
(5:18:09 AM) 3 trips more..
(5:18:09 AM) Sorry, can’t move. You told me to stop moving!
(5:18:09 AM) Sorry, can’t move. You told me to stop moving!
(5:18:09 AM) Sorry, can’t move. You told me to stop moving!
(5:18:09 AM) 2 trips more..
(5:18:09 AM) Sorry, can’t move. You told me to stop moving!
(5:18:09 AM) Sorry, can’t move. You told me to stop moving!
(5:18:09 AM) Sorry, can’t move. You told me to stop moving!
(5:18:09 AM) 1 trip more..
(5:18:09 AM) Sorry, can’t move. You told me to stop moving!
(5:18:09 AM) Destination reached!
(5:18:09 AM) Sorry, can’t move. You told me to stop moving!
(5:18:09 AM) Well, you know, I don’t mind continuing it any time! 😉
(5:18:09 AM) (SCENARIO) Stopped.
(5:18:09 AM) Gathering stopping…
(5:18:09 AM) Gathering stopped.
(5:18:09 AM) Well, you know, I don’t mind continuing it any time! 😉
(5:27:11 AM) Old presets backed up to: C:\Users\joeya\AppData\Local\Temp\miqobot\presets009.miqo
(5:28:19 AM) (SCENARIO) Started:
(5:28:19 AM) ‘The Diadem: ⚒🌱’
(5:28:19 AM) Chapter: 1
(5:28:32 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:28:33 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:28:35 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:28:36 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:28:37 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:28:38 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:28:40 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:28:41 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:28:42 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:28:43 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:28:44 AM) Sorry, can’t changejob() – TIME OVER! (10 sec)
(5:28:44 AM) ERROR (Chapter 1, Line 6): Execution error
(5:29:44 AM) (SCENARIO) Started:
(5:29:44 AM) ‘The Diadem: ⚒🌱 with collectable turn in’s’
(5:29:44 AM) Chapter: 1
(5:29:57 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:29:58 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:30:00 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:30:01 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:30:02 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:30:03 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:30:05 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:30:06 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:30:07 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:30:07 AM) (SCENARIO) Stopping…
(5:30:08 AM) Well, you know, I don’t mind continuing it any time! 😉
(5:30:08 AM) (SCENARIO) Stopped.
(5:34:40 AM) Old presets backed up to: C:\Users\joeya\AppData\Local\Temp\miqobot\presets010.miqo
(5:34:43 AM) Old presets backed up to: C:\Users\joeya\AppData\Local\Temp\miqobot\presets011.miqo
(5:35:02 AM) (SCENARIO) Started:
(5:35:02 AM) ‘The Diadem: ⚒ with collectable turn in’s’
(5:35:02 AM) Chapter: 1
(5:35:15 AM) I am ‘Miner’ now! :3
(5:35:20 AM) (SCENARIO) Stopping…
(5:35:20 AM) Materia extraction complete :3
(5:35:20 AM) Well, you know, I don’t mind continuing it any time! 😉
(5:35:20 AM) (SCENARIO) Stopped.
(5:35:27 AM) (SCENARIO) Started:
(5:35:27 AM) ‘The Diadem: ⚒ with collectable turn in’s’
(5:35:27 AM) Chapter: 1
(5:35:40 AM) I am ‘Miner’ now! :3
(5:35:46 AM) Materia extraction complete :3
(5:35:47 AM) All gear repaired ^_^
(5:35:48 AM) Sending key: ‘num.’ (Delay: 0.00 sec)
(5:35:48 AM) Sending key: ‘num.’ (Delay: 0.00 sec)
(5:35:48 AM) Sending key: ‘num.’ (Delay: 0.00 sec)
(5:35:49 AM) Sending key: ‘num.’ (Delay: 0.00 sec)
(5:35:49 AM) Sending key: ‘num.’ (Delay: 0.00 sec)
(5:35:52 AM) Adventure calls! I have to travel far away. (Grid: ‘The Diadem ⚒🌱’, Waypoint: 439)
(5:35:55 AM) Sorry, can’t find path sequence from 510 to 439 🙁 Maybe grid is not connected?
(5:35:55 AM) Sorry, but I can’t find the way to the next trip 🙁
(5:35:56 AM) Turning camera to vertical angle: 0.00
(5:35:56 AM) Turning camera to angle: -1.41
(5:35:57 AM) Repairing gear at NPC: ‘Mender’
(5:36:02 AM) All gear repaired ^_^
(5:36:03 AM) Sending hotbar icon: [3][1] (Delay: 0.00 sec)
(5:36:03 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 3’.
(5:36:03 AM) (SCENARIO) Chapter 1 complete.
(5:36:06 AM) Adventure calls! I have to travel far away. (Grid: ‘The Diadem ⚒🌱’, Waypoint: 442)
(5:36:09 AM) Sorry, can’t find path sequence from 510 to 442 🙁 Maybe grid is not connected?
(5:36:09 AM) Sorry, but I can’t find the way to the next trip 🙁
(5:36:09 AM) Turning camera to vertical angle: -0.40
(5:36:09 AM) Turning camera to angle: -0.23
(5:36:10 AM) (SCENARIO) Chapter 2 complete.
(5:36:10 AM) Sending key: ‘num.’ (Delay: 0.00 sec)
(5:36:11 AM) Sending key: ‘num.’ (Delay: 0.00 sec)
(5:36:11 AM) Sending key: ‘num.’ (Delay: 0.00 sec)
(5:36:11 AM) Sending key: ‘num.’ (Delay: 0.00 sec)
(5:36:12 AM) Sending key: ‘num.’ (Delay: 0.00 sec)
(5:36:12 AM) I am ‘miner’ now! :3
(5:36:12 AM) Sending key: ‘num0’ (Delay: 1.00 sec)
(5:36:14 AM) Sending key: ‘num0’ (Delay: 1.00 sec)
(5:36:15 AM) Sending key: ‘num0’ (Delay: 1.00 sec)
(5:36:16 AM) Sending key: ‘num0’ (Delay: 1.00 sec)
(5:36:17 AM) Sending key: ‘num4’ (Delay: 1.00 sec)
(5:36:19 AM) Sending key: ‘num0’ (Delay: 2.00 sec)
(5:36:21 AM) Sending key: ‘num8’ (Delay: 1.00 sec)
(5:36:22 AM) Sending key: ‘num4’ (Delay: 1.00 sec)
(5:36:24 AM) Sending key: ‘num0’ (Delay: 1.00 sec)
(5:36:25 AM) (SCENARIO) Chapter 3 complete.
(5:36:28 AM) Gathering started.
(5:36:28 AM) Max node count: 40
(5:36:28 AM) Scanning for shiny gathering nodes like ‘<anything>’ *.*
(5:36:28 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 10’.
(5:36:29 AM) Scanning for shiny gathering nodes like ‘<anything>’ *.*
(5:36:29 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 10’.
(5:36:30 AM) Scanning for shiny gathering nodes like ‘<anything>’ *.*
(5:36:30 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 10’.
(5:36:32 AM) Scanning for shiny gathering nodes like ‘<anything>’ *.*
(5:36:32 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 10’.
(5:36:33 AM) Scanning for shiny gathering nodes like ‘<anything>’ *.*
(5:36:33 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 10’.
(5:36:34 AM) Scanning for shiny gathering nodes like ‘<anything>’ *.*
(5:36:34 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 10’.
(5:36:36 AM) Scanning for shiny gathering nodes like ‘<anything>’ *.*
(5:36:36 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 10’.
(5:36:37 AM) Scanning for shiny gathering nodes like ‘<anything>’ *.*
(5:36:37 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 10’.
(5:36:38 AM) Scanning for shiny gathering nodes like ‘<anything>’ *.*
(5:36:38 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 10’.
(5:36:39 AM) Scanning for shiny gathering nodes like ‘<anything>’ *.*
(5:36:39 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 10’.
(5:36:41 AM) Scanning for shiny gathering nodes like ‘<anything>’ *.*
(5:36:41 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 10’.
(5:36:42 AM) Scanning for shiny gathering nodes like ‘<anything>’ *.*
(5:36:42 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 10’.
(5:36:43 AM) Scanning for shiny gathering nodes like ‘<anything>’ *.*
(5:36:43 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 10’.
(5:36:45 AM) Scanning for shiny gathering nodes like ‘<anything>’ *.*
(5:36:45 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 10’.
(5:36:46 AM) Scanning for shiny gathering nodes like ‘<anything>’ *.*
(5:36:46 AM) Uhoh. There’s no key bound to action ‘Switch to Hotbar 10’.
(5:36:46 AM) (SCENARIO) Stopping…
(5:36:47 AM) Well, you know, I don’t mind continuing it any time! 😉
(5:36:47 AM) (SCENARIO) Stopped.
(5:36:47 AM) Gathering stopping…
(5:36:47 AM) Gathering stopped.
(5:36:47 AM) Well, you know, I don’t mind continuing it any time! 😉

the reson miqobot is not working for you is becuse it needs to swtich your primary hot bar (bar 1) to the other hotbars you need a put a key binding for switching the hotbars this keybinding can be any key on the keyboard or combination of of keys like “num 3” , “]” or something like this ” control + alt + p ” for instance, miqobot will use any key binding you pick it just has to have one miqobot

[r51093Participant]

Saya wrote:

I found another spot where Miqobot for me stands ontop of a stone and just waves the cam from left to right with no end because the node is at the bottom of the stone. She ends up blacklisting the node and stops working.

(X:18.2 Y:11.0)

thank you for the report i will take care of this now 😀 also thanks for the X , Y , cords they help alot for finding the area that needs to be fixed 😀

Fixed: 😀 here is the fixed grid thank you for reporting the issue

[r51093Participant]

kdumbledore wrote:

I’ve attached the file to this post. It confused me at first too, as it shows up just an itty bitty teeny tiny little blue link. It isn’t super noticeable. But once you know what to look for, it’s easier to find the download files.

thank you 😀 sorry i didnt check the forum in abit been doing some crafting of my own in the game

kdumbledore wrote:

In the scenario’s I don’t seem to ever use the boomies to make the monsters go boom! Is there a special trick to getting those to go?

are you still haveing issues with the augur?

Darkdragon1231989 wrote:

I am landing a bit away from some of the nodes and getting stuck on hills before I can get to the node is there a setting or something I could have messed up?

can you link the error that miqobot reports? just copy the text in the lower box of miqobot this will help me to solve the issue

joearny wrote:

i know im stupid …but where is the file or what ever i use to import?

yes all updated grids i try to keep at the end of the thread post just look for the last post i make there should be the link right below mine i remove the old link/ files form the other post so that old grids / scenario’s are not mistakenly used

kaiten wrote:

Another potential stupid question, got it to work, but it only gathers mats from one node and then stops? How do you make it keep running?

is it showing any kind of error? also make sure that compass box is checkmarked it needs this on to search for gathering nodes not visible on the mini map the attached image below will show you what needs to be check marked, if that dose not work then try this new attachment and see if it works ( sometimes simply restarting miqobot resolves some issues )

Note: when importing a new grid you should delete any old grids / scenario’s miqobot will not delete or overwrite old ones it will insted keep both and if they have the same name it can be hard to know what one is the newest / most updated one below is the most recent version

• This reply was modified 3 years, 11 months ago by  r51093.

[r51093Participant]

Breakfast Enthusiast wrote:

r51093 wrote:

well i just learned something new about Miqobot apparently you can export and import multiple scenarios, grids, and presets in one file XD so here you go this attachment has the following scenarios in it

The Diadem: ⚒🌱

this is the original

The Diadem: ⚒🌱 with collectable turn in’s

original with collectable turn in

at the request of multiple people i have also split the scenario for those who want to focuse only mining ⚒ or botany 🌱

The Diadem: ⚒ with collectable turn in’s

Only Mining ⚒ scenario

The Diadem: 🌱 with collectable turn in’s

Only Botany 🌱 scenario

i renamed the scenarios added new waypoints for the augur, and at the request of Breakfast Enthusiast i added the repair NPC in the ferment for all the scenarios thank you all for your continued suport and assistance with the grid / scenario and as always plese post here if there are any issues 😀

NOTE: all of the above scenarios are in the single attachment below

This is awesome! It’s seriously wonderful to see this project evolve overtime and I’m glad my little suggestion could help out :), It seems you put the wrong number on the Mining/Botany only versions for part 2 of the script, using 443 instead of 442 which is the correct node to talk to the NPC to travel to the Diadem, the other two seem to be fine.

oh dear thank you XD i had to do alot of waypoint ajustments and must have missed them thanks for the info i will repost with a fix now and as always thanks for the report

NOTE: this update has the fixed waypoint for enerting the diadem scenario’s that were affected were the mining ⚒ only and the botany 🌱 only scenario’s – thank you for reporting the error 😀

Attachments:

You must be logged in to view attached files.

[r51093Participant]

well i just learned something new about Miqobot apparently you can export and import multiple scenarios, grids, and presets in one file XD so here you go this attachment has the following scenarios in it

The Diadem: ⚒🌱

this is the original

The Diadem: ⚒🌱 with collectable turn in’s

original with collectable turn in

at the request of multiple people i have also split the scenario for those who want to focuse only mining ⚒ or botany 🌱

The Diadem: ⚒ with collectable turn in’s

Only Mining ⚒ scenario

The Diadem: 🌱 with collectable turn in’s

Only Botany 🌱 scenario

i renamed the scenarios added new waypoints for the augur, and at the request of Breakfast Enthusiast i added the repair NPC in the ferment for all the scenarios thank you all for your continued suport and assistance with the grid / scenario and as always plese post here if there are any issues 😀

NOTE: all of the above scenarios are in the single attachment below

• This reply was modified 3 years, 11 months ago by  r51093.
• This reply was modified 3 years, 11 months ago by  r51093.

[r51093Participant]

Breakfast Enthusiast wrote:

Hey, I was wondering if it was possible to make a version of the scenario that uses the NPC to repair your gear in the first part instead of doing so by yourself? Unfortunately I don’t really have my crafters leveled and I have a feeling some others don’t as well

yes this can be done nice timing by the way i was just about to upload the new grids i will add in the repair NPC before i upload

[r51093Participant]

garden wrote:

r51093 wrote:

that is odd miqobot should go to a set waypoint on the lower islands for the augur are you useing the latest update? or the correct grid? according to miqobot and thier explanation on how the import feature works it will import the new grid/scenarios but it wont delete or overwrite old ones as explained below

Oh no, it’s finding monsters fine if I have ALL the monsters on the list. What I’m saying is I only want it to kill those three; protos, icetraps, and melias, and the waypoints the scenario uses by default aren’t close enough to any of those to work. Do you have any idea of what might be a better waypoint for me personally?

oh i see i am releaseing a grid soon with new waypoints just for that reason i should have it done soon maybe tomorrow at the latest

[r51093Participant]

kdumbledore wrote:

(4:31:56 PM) (SCENARIO) Started:
(4:31:56 PM) ‘The Diadem ⚒🌱’
(4:31:56 PM) Chapter: 1
(4:31:59 PM) DEBUG: Name not found. GatherPreset: ‘botanist ⚒’
(4:31:59 PM) ERROR (Chapter 1, Line 3): Execution error

Anyone know why I’m getting this in the scenario? I have the botanist preset in my gathering tab, but it isn’t registering that it’s there?

the gatherong preset name in the scenario is wrong not sure how that happened

gather preset for botany is ” gatherPreset(botanist 🌱) ” you have ” GatherPreset: ‘botanist ⚒’ ” and botanist is normally in the second part of the scenario not in chapter one, i will be releasing them in thier own parts soon as request have been rolling in for it

[Author]

Posts