Scenarios for leveling Botanist and Miner 52+

Forum Forums Grids and Presets Scenarios for leveling Botanist and Miner 52+

This topic contains 80 replies, has 34 voices, and was last updated by Antonkell Antonkell 4 years, 12 months ago.

Viewing 15 posts - 16 through 30 (of 81 total)
  • Author
    Posts
  • #7315

    fernkomoyo
    Participant
    0

    Hello I am new to miqobot i tried using the miner 52 scenario, but it just stays afk after the time end.

    Attachments:
    You must be logged in to view attached files.
    #7317
    Lyfox
    Lyfox
    Participant
    1+

    AFK until: 8:05et (2564 seconds)
    2564 seconds is roughly 14 eorzea hours.

    Miqo uses 24 hour format. If you want to wait until 20:05et select a different chapter.

    #7792
    kneefalls
    kneefalls
    Participant
    0

    Thank you for this! Very helpful 🙂 Are there any other leveling scenarios like this?

    #9601

    Nudelsuppe
    Participant
    0

    afkuntil(8:05et) is not working, it just says 2100+ seconds, and that will be 35 minutes in normal time, and its not just this chapter thats not working, tested it with chapter 1 and 2 too, same “error”.

    €: It was not working for me becuase of my english language setting in FF14, changed it to german and its working properly.

    • This reply was modified 5 years, 11 months ago by  Nudelsuppe.
    • This reply was modified 5 years, 11 months ago by  Nudelsuppe.
    #9604
    Lyfox
    Lyfox
    Participant
    1+

    Miqo uses 24 hour format regardless of language. Theres 8:05et and 20:05et.

    #9611

    mineisyours
    Participant
    0

    can you use local time instead of Eorzea time?

    #9612
    Lyfox
    Lyfox
    Participant
    0

    Yes you can. Just remove ‘et’.

    #9744
    Esetta
    Esetta
    Participant
    0

    every time i do the chapter 2 it flys to beacon then when gathering starts it trys to dismount and gets stuck againbst wall

    #9748
    Lyfox
    Lyfox
    Participant
    0

    Id love to help but without message log theres nothing i can do. There are 6 scenarios here and im not sure which one youre using. Could you show some log?

    #9752
    Esetta
    Esetta
    Participant
    0

    ah is all good was human error i removed all presets and reloaded just this one again and its fine i must have edited it somehow

    #9782
    yankeefan1987
    yankeefan1987
    Participant
    0

    I tried following the instructions and updating the selections based on what the daily turn-ins are: It keeps gathering Green Quartz and Old World Figs as non-collectables.

    I have the Green Quartz scenario set to gather from slot 6, and Old World Fig to gather from Slot 2. I had 450 potency / 600 GP selected, but if need be, I’ll downgrade them.

    • This reply was modified 5 years, 11 months ago by yankeefan1987 yankeefan1987.
    #9784
    yankeefan1987
    yankeefan1987
    Participant
    0

    I tried following the instructions and updating the selections based on what the daily turn-ins are: It keeps gathering Green Quartz and Old World Figs as non-collectables.

    I have the Green Quartz scenario set to gather from slot 6, and Old World Fig to gather from Slot 2. I had 450 potency / 600 GP selected, but if need be, I’ll downgrade them.

    I’m wondering if it has anything to do with the Skills template I used. I’m looking at the log, and if enough GP wasn’t available, it skipped the thing entirely. I have Cordial’s checked off, but the rotation isn’t using them for some reason. Is there anyway I can make sure the bot uses them?

    #9786
    yankeefan1987
    yankeefan1987
    Participant
    0

    Id love to help but without message log theres nothing i can do. There are 6 scenarios here and im not sure which one youre using. Could you show some log?

    I’m having an issue with the level 56 scenario on chapters 2/9

    (01:26:38) Destination reached!
    (01:26:38) Adventure calls! I have to jump into wormhole. (Angle: -2.20)
    (01:26:43) (SCENARIO) Chapter 8 complete.
    (01:26:44) I am ‘Miner’ now! :3
    (01:26:46) Adventure calls! I have to travel far away. (Grid: ‘Scenario – Cuprite’, Waypoint: 8)
    (01:26:46) Going from 17 to 8 in 22 trips.
    (01:26:46) 22 trips more..
    (01:26:50) 21 trips more..
    (01:26:55) 20 trips more..
    (01:26:58) 19 trips more..
    (01:27:01) 18 trips more..
    (01:27:04) 17 trips more..
    (01:27:07) 16 trips more..
    (01:27:11) 15 trips more..
    (01:27:14) 14 trips more..
    (01:27:18) 13 trips more..
    (01:27:22) 12 trips more..
    (01:27:25) 11 trips more..
    (01:27:27) 10 trips more..
    (01:27:30) 9 trips more..
    (01:27:32) 8 trips more..
    (01:27:34) 7 trips more..
    (01:27:38) 6 trips more..
    (01:27:41) 5 trips more..
    (01:27:44) 4 trips more..
    (01:27:46) 3 trips more..
    (01:27:49) 2 trips more..
    (01:27:50) 1 trip more..
    (01:27:50) Destination reached!
    (01:27:50) AFK until: 14:05et (198 seconds)
    (01:31:09) Gathering started.
    (01:31:09) Max node count: 1
    (01:31:09) Scanning for shiny gathering nodes like ‘<anything>’ *.*
    (01:31:09) No gathering nodes around. But hey, there’s a beacon over there for me ->
    (01:31:09) Going from 8 to 8 in 1 trips.
    (01:31:09) 1 trip more..
    (01:31:09) Destination reached!
    (01:31:09) Scanning for shiny gathering nodes like ‘<anything>’ *.*
    (01:31:23) Sorry, can’t dismount 🙁
    (01:31:26) Sorry, can’t stand up 🙁
    (01:31:27) Scanning for shiny gathering nodes like ‘<anything>’ *.*

    My character gets stuck at The Dravanian Hinterlands ( 27.2 , 31.6 ) Z: 2.6, face-deep into the mountain, almost directly below the beacon. i’ve noticed that if the node spawns

    If the node spawns to the east, there are times where my character will do a weird kind of mid-air-walk and get back on track. Otherwise, I just get stuck and Miqobot times out.

    This is the only path giving me issues; everything else works, even on 1440p.

    #9787
    kontu
    kontu
    Participant
    0

    @Yankee – Pop on the 3d editor and move the waypoint slightly away from the wall. Or use a smaller mount sometimes can help – I’ve found grids that have issues using say, Fat Chocobo or Manaseeker, but work fine if I use just a chocobo

    #9788
    yankeefan1987
    yankeefan1987
    Participant
    0

    Ok! I am using company chocobo (i had flying mount roulette before) and have been having luck all morning. My only problem right now is that I only seem to recover 540ish GP inbetween nodes, and even with “Cordials” selected (and I’ve tried having regular and Hi on the tool bar), they don’t get used.

    I even went into the .txt file and changed “usecordials” to “true” and that didn’t work. Is there someway I can make a change in the txt file to incorporate it into a rotation, or am I missing something?

Viewing 15 posts - 16 through 30 (of 81 total)

You must be logged in to reply to this topic.