Infinite Universal Diadem Scenario BotanistšŸŒ±, Miningāš’, and FishingšŸŽ£

Forum Forums Grids and Presets Infinite Universal Diadem Scenario BotanistšŸŒ±, Miningāš’, and FishingšŸŽ£

This topic contains 933 replies, has 246 voices, and was last updated by  Guni 6 months, 2 weeks ago.

Viewing 15 posts - 76 through 90 (of 934 total)
  • Author
    Posts
  • #26153
    Falbium
    Falbium
    Participant
    0

    I downloaded and installed those files, I can see the lines for the navigation gridā€¦ but Iā€™m still getting blackout mode and it wonā€™t do anything. Any advice?

    I think the miqobot team has to fix something because I am getting the same error

    #26154
    kdumbledore
    kdumbledore
    Participant
    0

    Sad day. I was reading a few other people are getting her to work, but that she’ll get stuck sometimes. :/ Heck, I’d be fine with assist mode lol! But nothing for meh but the good ol’ fashioned way. :O Yay streaming…

    #26155

    alice
    Participant
    0

    Did you update to 1.3.40?

    #26156

    Bloodmaul
    Participant
    0

    This scenario works fine. However, it will only work fine it you sit and watch it and edit the placement of some of the way points as they’ve changed for this iteration of the diadem. There are spots where the bot will run into walls or is unable to dismount, and a simple adjustment of that way point will solve the problem.

    #26157
    0

    Miqobot is broken with the Diadem right now due to the update, it’s not the scenario/grid that’s, so it’s gonna show up as a blackout until it gets updated

    Edit: I did not realize a new version came out as I typed this, my mistake lol

    #26159
    0

    Just tested the grid for a bit, it still SORTA works! But… as above said you do get stuck in a lot of places so I don’t know if I’d recommend it at the moment… OP definitely needs to update it sadly šŸ™ sorry SE ruined all your hard work </3

    #26164
    kdumbledore
    kdumbledore
    Participant
    0

    I don’t get it to even sorta work, I legit get nothing. Just straight to blackout mode. I tried in gathering tab and in the scenario tab, just.. nothing. T_T Hopefully it gets fixed sooner rather than later.

    (7:46:05 PM) Scanning for shiny gathering nodes like ‘<anything>’ *.*
    (7:46:05 PM) I see a shiny node at (-714.231384, -48.271660, 271.928802).
    (7:46:05 PM) Sorry, can’t move. It’s dark and creepy around me! I’d better hold my breath, so nobody would find me.
    (7:46:05 PM) Current zone: Unknown (ID 03AB)
    (7:46:06 PM) Going from 207 to 247 in 4 trips.
    (7:46:06 PM) Sorry, can’t move. I had a blackout and I’m still hiding in the corner!
    (7:46:06 PM) 4 trips more..
    (7:46:06 PM) Sorry, can’t move. I had a blackout and I’m still hiding in the corner!
    (7:46:06 PM) 3 trips more..
    (7:46:06 PM) Sorry, can’t move. I had a blackout and I’m still hiding in the corner!
    (7:46:06 PM) 2 trips more..
    (7:46:06 PM) Sorry, can’t move. I had a blackout and I’m still hiding in the corner!
    (7:46:06 PM) 1 trip more..
    (7:46:06 PM) Sorry, can’t move. I had a blackout and I’m still hiding in the corner!
    (7:46:06 PM) Sorry, can’t move. I had a blackout and I’m still hiding in the corner!
    (7:46:06 PM) Destination reached!
    (7:46:06 PM) Sorry, can’t move. I had a blackout and I’m still hiding in the corner!
    (7:46:06 PM) Blackout while travelling… Good night! <3
    (7:46:06 PM) (NOTE) Blackout switch is triggered.
    (7:46:06 PM) (NOTE) Please save the message log for analysis and restart Miqobot.
    (7:46:57 PM) (SCENARIO) Started:
    (7:46:57 PM) ‘New Scenario’
    (7:46:57 PM) Chapter: 1
    (7:46:57 PM) Blackout while travelling… Good night! <3
    (7:46:57 PM) (NOTE) Blackout switch is triggered.
    (7:46:57 PM) (NOTE) Please save the message log for analysis and restart Miqobot.
    (7:47:14 PM) Gathering started.
    (7:47:14 PM) Max node count: 999
    (7:47:14 PM) Scanning for shiny gathering nodes like ‘<anything>’ *.*
    (7:47:14 PM) I see a shiny node at (-732.256714, -58.104549, 271.941101).
    (7:47:14 PM) Blackout while travelling… Good night! <3
    (7:47:14 PM) (NOTE) Blackout switch is triggered.
    (7:47:14 PM) (NOTE) Please save the message log for analysis and restart Miqobot.
    (7:47:18 PM) DEBUG: Name not found.
    (7:47:18 PM) GatherPreset: ‘5DP3BTN’
    (7:47:18 PM) GridName: ‘diadem botanist 1’
    (7:47:47 PM) Old presets backed up to: C:\Users\ssaku\AppData\Local\Temp\miqobot\presets004.miqo
    (7:47:53 PM) Gathering started.
    (7:47:53 PM) Max node count: 999
    (7:47:54 PM) Scanning for shiny gathering nodes like ‘<anything>’ *.*
    (7:47:54 PM) I see a shiny node at (-732.256714, -58.104549, 271.941101).
    (7:47:54 PM) Blackout while travelling… Good night! <3
    (7:47:54 PM) (NOTE) Blackout switch is triggered.
    (7:47:54 PM) (NOTE) Please save the message log for analysis and restart Miqobot.
    (7:48:07 PM) Gathering started.
    (7:48:07 PM) Max node count: 999
    (7:48:16 PM) Scanning for shiny gathering nodes like ‘<anything>’ *.*
    (7:48:16 PM) I see a shiny node at (-732.256714, -58.104549, 271.941101).
    (7:48:16 PM) Blackout while travelling… Good night! <3
    (7:48:16 PM) (NOTE) Blackout switch is triggered.
    (7:48:16 PM) (NOTE) Please save the message log for analysis and restart Miqobot.

    #26165
    Lyfox
    Lyfox
    Participant
    0

    Did you update to 1.3.40?

    #26166
    0

    As several others have pointed out, Downloading and updating to 1.3.40 should fix the issue.

    Although curiously an issue I have now is actually *editing* or even viewing the grid. It works functionally, but I can’t view it on the radar at all let alone move nodes as a result so I’m wondering why that is tbh.

    #26167
    Lyfox
    Lyfox
    Participant
    0

    Probably because your antivirus blocked 3d radar. Look in task manager do you see miqoradar.exe?

    #26169
    kdumbledore
    kdumbledore
    Participant
    0

    Ooooh you meant upgrade Miqobot itself? I just did but I also randomly get another error from miqobot the program, not any of the botting aspects.

    “Line 46588 (File ‘location on my computer/miqobot_v1.3.40.exe’) Error: Variable subscript badly formatted.”

    Though that doesn’t happen all the time. For example now it’s working just fine! <3 Cause ya’ll are awesome and kept telling me I was being an idiot and needed to update the program LOL!

    #26170
    r51093
    r51093
    Participant
    1+

    I downloaded and installed those files, I can see the lines for the navigation gridā€¦ but Iā€™m still getting blackout mode and it wonā€™t do anything. Any advice?

    sadly miqobot gathering is broken in the diadem untill they update the zone information so that it recognizes the diadem zone

    Miqobot dose not know the diadem zone anymore with the update

    i dont get it either but it appears to be a safety measure of some kind

    sadly diadem farming is at a standstill untill the miqobot devteam updates

    #26173
    Lyfox
    Lyfox
    Participant
    0

    sadly miqobot gathering is broken in the diadem untill they update the zone information so that it recognizes the diadem zone

    Did you update to 1.3.40?

    #26174
    r51093
    r51093
    Participant
    1+

    sadly miqobot gathering is broken in the diadem untill they update the zone information so that it recognizes the diadem zone

    Did you update to 1.3.40?

    i did not thank you, miqobot did not tell me the update came out normally it says so in the bot i will work on getthing things up and running now

    #26175
    Lyfox
    Lyfox
    Participant
    0

    Miqo doesnt say about minor updates when theres a congestion like on patch days. Probably to reduce server load.
    Its useful to keep an eye on the news thread: https://miqobot.com/forum/forums/topic/shadowbringers-5-0-miqobot-status/page/6/#post-26128

Viewing 15 posts - 76 through 90 (of 934 total)

You must be logged in to reply to this topic.