This topic contains 28 replies, has 10 voices, and was last updated by 
Arc 6 years, 1 month ago.
-
Posts
-
my miqobot solver is lagging if i start the craft , im getting no response what can i do against?
Its not lagging its solving. Just wait until it completes the solving phase. Look at the time it says before starting thats how long you have to wait.
This has just been answered in the neighbour thread.
Please note that we designed Crafting Solver with maximum optimization for endgame recipes.
Crafting Solver needs only a few seconds on anything below 70*** and 1-2 minutes on 70**** recipes. If you select any option that brings the computation time above 2 minutes, you increase the average HQ rate by 1-2% at best.The most significant HQ boost on 70-star tier comes from Maker’s Mark, RNG abilities, and Good condition procs.
Neither of these factors is affected by Crafting Solver settings.This has just been answered in the neighbour thread.
Please note that we designed Crafting Solver with maximum optimization for endgame recipes.
Crafting Solver needs only a few seconds on anything below 70*** and 1-2 minutes on 70**** recipes. If you select any option that brings the computation time above 2 minutes, you increase the average HQ rate by 1-2% at best.The most significant HQ boost on 70-star tier comes from Maker’s Mark, RNG abilities, and Good condition procs.
Neither of these factors is affected by Crafting Solver settings.I cant remember what It was that I used the solver on.. but it was taking like 10 minutes to compute the result Lol I did use innovation/manipulation as options for the solver, but 10 minutes seemed like overkill. My PC specs arent top of the line but they arent that bad either! 16GB Ram and Intel Core i7-6700HQ
Yep 10 minutes is overkill.
We released a series of in-depth analysis posts on crafting math a while ago.
You can find them in this thread: Stormblood – Upgrade Stage 2The following Crafting Solver settings are recommended:
- CP Chunks – 8:1.
- CPU Intensive – Ingenuity + Manipulation II.
Innovation is not recommended anymore as it gives a very small quality boost when compared to other alternatives.
The following actions are highly recommended:
- Maker’s Mark + Flawless Synthesis (+26.6% to average HQ rate)
- Patient Touch (+41.5% to average HQ rate)
- Tricks of the Trade (+9.8% to average HQ rate)
Well Miqo supports macros and solver both so everyone decides for themselves. Personally im having a blast with the solver. Already sold several HQ raiding sets while sitting at 1604 control and one specialist. To use those macros i would have to burn -20 mil on melds. With Miqo ive already earned +50 mil instead.
Lyfox, how much cp are you sitting at if you please?
I have a question. New to the service, I’ve been able to click ignore quality on solver, but it wasn’t working before then. Would just spam action over and over. I’ve searched forums for information before posting, just making sure i’m not missing something. Is there particular abilities i have to use with solver or does it figure it out on its own? Thanks.
Lunchbox, your question isn’t very clear. Ignore quality is meant to do just that, it should only spam progress actions. It also will use Tricks of the Trade and Manipulation II if they’re available but shouldn’t use any Touch actions. If you’re wanting HQ items, just disable this and make sure you have put the abilities you want to be used on your bars.
Anyway…hope this helped, otherwise, restate your question more clearly.
Sorry i may be phrasing my question wrong. When i try to use solver, it appears i have to have specific actions on specific slots on the hot bar. Am i correct by this? I was doing a craft, and it kept spamming inner quiet over and over again until i moved basic touch to that spot, and it finished the craft. I am new, so i don’t want to get on to many peoples nerves, but just thought id ask. Also, is there a place i can find a in depth guide on macros? I haven’t been able to get them work from watching the video. Thanks.
Likely, you don’t have keybinds set up properly, the bot should detect and use any skills you have available on your bars but if it can’t swap bars or use a keybind, then it’ll do weird stuff like that.
You’ll wanna have 3 hotbars with keybinds that switch when you change jobs, this will be enough space for combat and crafting. Keybinding them as Bar 1: “1” – “=”, Bar 2: CTRL + “1” – “=”, and Bar 3: Shift + “1” – “=”, is pretty standard.
Then put all of your crafting abilities on the bars, put them on even if you can’t use them yet. Saves time in the long run and gets you familiar with them. I also recommend this for combat classes.
Make sure you pay attention to the cross-class skills as well. Awhile back they were rated for their usefulness, find and read that then slot accordingly.
I don’t understand, why anyone still doubts Miqobot. Just as an example:
I have 1668 Craftsmanship, 1659 Control and 482 CP without buff food or the cp pot on my culinarian (no specialist). Just this morning I let Miqo craft 60x Shakshouka (so 180 items in total) without buff food or the pot only out of NQ materials. The settings I was using were CP 4:1, Ingenuity and Manipulation ticked on and the rest as default.
Only 2 crafts turned out NQ, so now I have 174 Shakshouka HQ and 6 Shakshouka NQ.
You must be logged in to reply to this topic.