[ZumyParticipant]

Alright okay thats good, now if you run the scenario again, does it still not work?

[ZumyParticipant]

Try this as a test

Switch job to Botanist.
Teleport to New Gridania -> Yellow Serpent Gate (North Shroud).
Go to the gathering tab of miqobot
Select Grid: Maple
Input Slot: 5
Input Count: 999
Press Start.

tell me if the same error occures

[ZumyParticipant]

“Target nearest npc or object” is assigned as well?

[ZumyParticipant]

Also check “Target nearest npc or object” keybind

[ZumyParticipant]

I don’t believe the issue lies with the bot, so lets try something else. Is the keybind “Cycle through UI Component Tabs(Forward)” as well as the (Back) one assigned to a key? Or the keybind “Cycle through HUD components(Forward)” as well as (back)

[ZumyParticipant]

To my knowledge miqobot should support all languages, try this. Close miqobot, delete everything created by the miqobot exe in the folder you stored it, start miqobot and touch nothing other than importing the scenario txt, select a chapter (if the current time pertains to nodes you cannot gather wait a bit and select another one) and press start. I did so just now with a clean new bot and settings and everything works fine, if this doesn’t work it is not miqobot but instead you havn’t mapped an action which miqobot needs to gather.

[ZumyParticipant]

Yup don’t worry you were correct, I assumed you were 60-60 haha, that is usually the cause. I’m messing with settings atm to see if I can recreate your problem.

[ZumyParticipant]

Okay that is really weird then, lemme try some things.

[ZumyParticipant]

Yea like I thought, again I think your problem is you didn’t edit out the parts I said to in my post. Check the stuff i said about adding “//”

[ZumyParticipant]

I think your problem is that you didn’t edit out the chapters of the scenario that I said to in my post 😛 because your bot is trying to find a lvl70 node that your miner cannot detect. What level is your gatherer? If it’s level 60, follow what I said in my post about adding a “//” to the beginning of certain lines.

• This reply was modified 7 years, 4 months ago by  Zumy.
• This reply was modified 7 years, 4 months ago by  Zumy.

[ZumyParticipant]

Thank you for the info 🙂 I don’t believe I have run into that error myself, and I have been testing the script constantly for the past couple of hours. I ran into some issues where the bot wouldn’t teleport, but that was one time and fixed itself with a restart lol. I’ll pay extra attention to see if this error pops up for me as I continue testing, did this happen consistently?

[ZumyParticipant]

Yea sorry I realized after I posted that its a bit of a handful XD with my stuff your jumping into the more complicated side of the bot, but its one of the more amazing things the bot can do. Get my scenario working and you can basically no hands level BOT and MIN from 60-70 😛

• This reply was modified 7 years, 4 months ago by  Zumy.

[ZumyParticipant]

Haha the bot isn’t all powerful silly 😛 you have to set up a path and a set of rules that the bot will follow. I recently created a very good scenario script for this bot that lets you gather red scripts and nodes to your hearts content, so lets use that as your trail example 😀 you can find it here. Once you’ve downloaded the attached txt file, press the “share” button within miqobot, then hit the “import” button and select the txt file. Make sure to follow the instructions I left on that post regarding what to do if your gatherer is a certain level etc, it is needed. Once everything is set up according to my instructions over there, simply select the scenario “Collectible Leveling” in the scenario tab, select the number from the column that corresponds to about 2 hours ahead of your eorzea time (look on the left, you should see afkUntil(numberhere), thats what im talking about) and hit start. If you have any questions be sure to ask here 🙂 errors will display in the little console at the bottom.

[ZumyParticipant]

**So as it seems I’m not able to edit the original post at this time (maybe because my account is new? idk) I’ll be attaching the update to this post and will update the original eventually if it lets me.**

Scenario for farming MIN/BOT collectibles for easy leveling 60-70, or a great way to farm red scripts.
Uses 6 nodes each with navigation routes; Beech Branch, Bamboo Shoot, Raw Star Spinel, Raw Triphane, Lotus Root and Raw Azurite.

**IMPORTANT PLEASE READ**
I had max melded ironwork’s gathering gear going into level 61 and above, so if you try out the pre-loaded rotation and it doesn’t work well for you please change it to something that would better fit your stats, but to my knowledge lower stats should be able to use it just fine.
The pre-loaded rotation uses 650GP, though that is with an added Field Mastery 1 at the beginning. If you have only 600GP you should remove that initial action from the macro, and likewise if you have 700GP or above you can use Field Mastery 2 instead.
At the beginning of chapters 1, 4, 5 and 8 there is the line “sendKey(ctrl+=, 1.5)”, on my hotbar this is what I assign Cordials to. **PLEASE CHANGE THIS LINE TO WHATEVER YOUR CORDIAL KEY IS, THEY ARE REQUIRED FOR NODES 2 HOURS APART. I RECOMMEND HAVING A STEADY SUPPLY OF CORDIALS FOR THIS SCENARIO, IT WILL USE A LOT OVER TIME.**

CHANGES:
-Added collectable level 66 node in The Azim Steppe (Raw Azurite)
-Added collectable level 66 node in Yanxia (Lotus Root)
-Set by default that the scenario only gather from one node
-Added unstealth() in several chapters
-Scenario now uses Cordial every chapter to allow for the new nodes

**IMPORTANT**
All of the nodes and routes are enabled by default, so if you are level 60 or below 66, you’ll have to edit a few lines in for the scenario to work properly for you;

1)IF YOU ARE NOT LEVEL 66 OR HIGHER-> You will need to edit chapters 2, 4, 8 and 10. All you have to do is add a “//” to the beginning of each line in the chapter. so for example “teleport(The Dawn Throne)” becomes “//teleport(The Dawn Throne)”
2)IF YOU ARE NOT LEVEL 61 OR HIGHER-> You will need to edit chapters 5, 6, 11 and 12 in the same way as the above step, add “//” to the beginning of each line in the chapter.
3) IF YOU ARE ONLY LEVELING ONE OF THE 2 GATHERERS-> On top of using the above two steps according to your level, make sure to add “//” to any chapters of the opposite class so that the scenario does not try to switch to and gather with it. MINER CHAPTERS: 1, 2, 6, 7, 8, 12 BOTANIST CHAPTERS: 3, 4, 5, 9, 10, 11.

—> As a side note you can start the scenario from the node of your choice by selecting the chapter containing the specific node before pressing start, the scenario will begin from the start of the chapter you have selected. I highly recommended starting on the 2nd chapter from your current time, for example if it is 930et select the chapter with 12:05et as its time to start, as it allows the first cordial enough time to reset after use. If you want to change how many times the scenario will loop, edit the number in the 13th chapter.
**PLEASE MAKE SURE YOU HAVE ALL REQUIRED ABILITIES ON YOUR HOT BAR AND CHECK MIQOBOT’S CONSOLE FOR ERRORS BEFORE REPORTING, UNASSIGNED KEYS ARE USUALLY THE CASE**

That’s it, press play, and let Miqobot get your red script items for you <3 happy gathering!!

• This reply was modified 7 years, 4 months ago by  Zumy.

[ZumyParticipant]

Glad to see everything is working for you guys 🙂 when I add the new nodes I’ll be sure to have the scenario set it to only gather 1 node by default so no one else has this problem, I thought that was saved in the gathering presets lol.

[Author]

Posts