Understanding Miqobot Crafting

[RhydinParticipant]

So, I’m trying to understand the crafting portion of Miqobot better. I see a lot of posts where you have to manually input the sequence of abilities, manually, but I’m trying to use the macros I’ve already created. (Sidenote: I can’t ever get the solver to HQ things like Matcha or Cunning Craftsman’s Tea, even with the same abilities my macros use being on the bars.)

So, unchecking the solver and leaving everything else at the default settings for “Recommended” (as if the solver were on), I have my macro set to
alt+5,alt+6,alt+7,alt+8
I have the ability delay set to 45 seconds, to give each macro enough time to complete.

However, when I start it, it waits the 45 seconds to start and will use the correct starting macro. The issue is that, when the first one is done, it jumps straight to the last one. I watch my bar and don’t see the other two being used early. It just seems to skip them.

Output window:

(6:25:36 PM) Crafting started.
(6:25:37 PM) Hitting Confirm button. :3
(6:26:23 PM) Crafting step 1 -> key 'alt+5'
(6:27:11 PM) Crafting step 15 -> key 'alt+8'
(6:27:21 PM) Yes, crafting SUCCESS! (1/1)
(6:27:23 PM) Yay! I crafted so many shiny things! Come check them out :)

Logfile:

---CraftLog opened---
Step,Craftsmanship,Control,CharLevel,RecipeLevel,CP,MaxCP,Progress,MaxProgress,Quality,MaxQuality,Durability,MaxDurability,Condition,SteadyHand,InnerQuiet,GreatStrides,WasteNot,Manipulation,Manipulation2,Ingenuity,Ingenuity2,Innovation,ComfortZone,MakersMark,Whistle,Reclaim,SoulCrystal,QA,Genius,Stroke,LastSkill,HitProgress,HitQuality,HitDurability,CPRecovered,HQRate
1,1700,1779,290,350,549,549,0,2760,0,24033,70,70,normal,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,1,0,FFFFFFFF,0,0,0,0,1
15,1700,3202,290,350,224,549,2067,2760,1839,24033,40,70,normal,5,5,0,0,0,4,0,0,0,9,0,0,0,0,1,1,0,00000119,0,0,0,0,2
19,1700,1779,290,350,180,549,2760,2760,3048,24033,35,70,normal,2,0,0,0,0,1,0,4,0,6,0,0,0,0,1,1,0,00018791,693,0,-10,0,3
SUCCESS

[LyfoxParticipant]

Use crafting steps instead of 45 second delays.
alt+5,,,,,,,,,,,,,,,alt+6,,,,,,,,,,,,,,,alt+7,,,,,,,,,,,,,,,alt+8,
Heres a post that explains how it works: https://miqobot.com/forum/forums/topic/crafting-rotation-help-enhancement-request/#post-882

But keep in mind that lags will break your game macro. It works much better with a native Miqo macro.

[RhydinParticipant]

Thank you very much! The information there, plus what I was able to find in the official support was enough to help line everything up. I ended up using a Miqo macro after all, as the steps method still wasn’t working the way I needed it to. It took a while to build the native one and required a bit of trial and error, but it works like a charm.

[LutBotParticipant]

Lyfox wrote:

Use crafting steps instead of 45 second delays.
alt+5,,,,,,,,,,,,,,,alt+6,,,,,,,,,,,,,,,alt+7,,,,,,,,,,,,,,,alt+8,
Heres a post that explains how it works: https://miqobot.com/forum/forums/topic/crafting-rotation-help-enhancement-request/#post-882

But keep in mind that lags will break your game macro. It works much better with a native Miqo macro.

Does it really? My connection is usually intermittent, and I’ve rarely failed macros/missed steps (What it does on big lag spikes is get stuck on a step, so it tries to input the next sequence and it just keeps going on a loop, until I manually hit a button to make it continue). I do this because my own macros finish the synths a lot faster than the solver (solver usually takes 40+ steps, my macro finishes in 26-ish).

[Author]

Posts