Forum › Forums › Grids and Presets › [Scenario] 5.3 New mats + Levinstrike Aethersand
This topic contains 4 replies, has 2 voices, and was last updated by
Flypig 5 years ago.
-
AuthorPosts
-
September 29, 2020 at 3:37 pm #24363
@Miqobot:
This thread is related to Collectable Gathering before Patch 5.4.
With the arrival of Patch 5.4, it is outdated.Scenario for 5.3 new mats + Aethersand farming:
– Brashgold Ore
– Tender Dill
– Levinstrike AethersandBuilt based on SuperSul’s Shadowbringers 5.0 Aethersands Scenario since sharing same gathering nodes and timeslots.
NOTES
======
– The two rotations used are instinctual for low GP and the usual 650GP 8/8 when you have it. Recommend to have min 650GP and white scrip gears
– No Cordial required by default, feel free to enable it based on your need by removing “//” from related Chapters
– Not designed for efficiency but economic, adjust with your own need.
– for Chapter 14, it’s set to self repair with return to Eulmore which was set as home by default, if you need NPC repair with teleport, replace self repair with NPC option per below://return() //job(MIN) //repair() //job(BTN) //repair() teleportIf(Eulmore) selectGrid(Eulmore) goToWaypoint(12) changeJob(Miner) repairNpc() changeJob(Botanist) repairNpc()– To collect Levinstrike Aethersand ONLY:
-
replace Chapter 1 + 2 with Chapter 3
-
replace Chapter 7 + 8 with Chapter 9 + 10
-
This topic was modified 5 years, 1 month ago by
Flypig.
-
This topic was modified 5 years, 1 month ago by
Flypig.
Attachments:
You must be logged in to view attached files.October 4, 2020 at 11:37 pm #24420October 5, 2020 at 9:24 am #24421October 5, 2020 at 11:42 pm #24432October 7, 2020 at 12:13 pm #24444To make it easier, i just made one for Levinstrike Aethersand only by replacing the relevant chapters.
Tested running 2hrs+ seems smooth.I have Eulmore set as Home location, use “//” if you don’t have it as Home location in Chapter 10.
//return()Attachments:
You must be logged in to view attached files. -
This topic was modified 5 years, 1 month ago by
-
AuthorPosts
You must be logged in to reply to this topic.