Help with Gathering Grids

[CSh4rpParticipant]

Hey all,

First time using Gathering Grids. I’ve grabbed a few for Cobalt Ore, and I’ve taken myself to Bluefog.

When I turn on Gathering, it simply keeps selecting between the node and any person around.

It doesn’t seem to move anywhere or click anything else. I had it move once to a node, but now nothing.

Unsure if I have any settings wrong.

Here’s the log:

(15:19:43) Gathering started.
(15:19:43) 	Max node count: 999
(15:19:43) Scanning for shiny gathering nodes like 'Lvl50' *.*
(15:19:43) No gathering nodes around. But hey, there's a beacon over there for me ->
(15:19:43) Going from 23 to 23 in 1 trips.
(15:19:48) Gathering stopping...
(15:19:48) Adventure cancelled... Yet, I'm still full of energy!
(15:19:48) 1 trip more..
(15:19:48) Sorry, can't move. You told me to stop moving!
(15:19:48) Destination reached!
(15:19:48) Sorry, can't move. You told me to stop moving!
(15:19:48) Well, you know, I don't mind continuing it any time! ;)
(15:19:48) Gathering stopped.

Gathering stopped is when I hit finish, as I didn’t want it to mess around.

I’ve used Miqo quite successfully for Combat Assistance, I was just hoping to farm while I working on my book. Was gonna have FF open on the second monitor.

I’ve added images of my settings as attachments, unsure how to show them in thread.

EDIT – It seems to work fine on Assist Mode, it’ll select the node and mine the Cobalt.

Thanks

• This topic was modified 4 years, 2 months ago by  CSh4rp.

Attachments:

You must be logged in to view attached files.

[LyfoxParticipant]

Youre using the name filter: Lvl50
But gathering nodes are actually: Lv50

You can remove the name filter its usually not needed except some rare cases.

[CSh4rpParticipant]

Thanks for the tip!

Unfortunately, I’m still having the same behaviour, it keep switching my selected target between Monsters and Players, and no movement whatsoever.

[LyfoxParticipant]

Then it looks like a keybind conflict. It seems you have a collision between Target Cursor keybind and something else. Take a look at the guide: https://miqobot.com/forum/forums/topic/help-keybinds/

If you cant figure it out try Miqo support. They should be able to resolve it for you: https://miqobot.com/#support

[CSh4rpParticipant]

Thanks! That’s seems to have solved it.

For future reference

I had Move Cursor and Point Camera keybound to slight variations.

Move Cursor was set to Up, Down, Left and Right respectively, while point camera was set to the same keys but using a shift modifier.

I guess Miqo didn’t like the shift-modifier.

Thanks for all your help 🙂

[Author]

Posts