Forum › Forums › Discussion › Did Recent Update Cause Issues?
Tagged: Control Settings, Legacy, Patch
This topic contains 9 replies, has 9 voices, and was last updated by rxantos 2 years, 11 months ago.
-
AuthorPosts
-
November 1, 2022 at 11:06 am #39613
Good morning all,
I have been using Miqobot fairly frequently over the last few weeks. Ran a few scenarios yesterday with no issues. After last night, 1Nov22, update and this morning I am getting the error:
(8:02:19 AM) Switch Control Settings to Legacy Type, please. :3
I haven’t changed any settings since yesterday. I checked my settings and they are still set on Legacy but Miqobot keeps giving me this error.
Any assistance would be greatly appreciated.
November 1, 2022 at 11:10 am #39614November 1, 2022 at 11:10 am #39615Hey Kyra, Every update causes the application to break and is generally back up in a day or so. Although, since the Russian invasion of Ukraine, it could take slightly longer. I’m confident we’ll get an update from the Miqo team soon. Now is an excellent time to play through the MSQ and other game parts.
November 1, 2022 at 11:25 am #39616It will be due to the OP Code changes each patch which SE decided to randomize for fun!
This patch the OP Codes are as follows:
StatusEffectList|90
StatusEffectList2|185
StatusEffectList3|de
BossStatusEffectList|36d
Ability1|130
Ability8|1df
Ability16|202
Ability24|bd
Ability32|14c
ActorCast|398
EffectResult|34b
EffectResultBasic|d9
ActorControl|2d3
ActorControlSelf|29b
ActorControlTarget|253
UpdateHpMpTp|2dc
PlayerSpawn|2c2
NpcSpawn|3cd
NpcSpawn2|7c
ActorMove|c2
ActorSetPos|22e
ActorGauge|11e
PresetWaymark|10f
Waymark|6f
SystemLogMessage|1f1November 1, 2022 at 11:30 am #39617November 1, 2022 at 2:23 pm #39620This is always the issue with a patch. I am sure they are working on it if they can. If they have power and are able to I am sure it will be out.
Check out: https://miqobot.com/forum/forums/topic/endwalker-6-0-miqobot-status/ to see when it is updated.
-
This reply was modified 2 years, 11 months ago by
Ral.
November 1, 2022 at 4:39 pm #39622November 1, 2022 at 11:36 pm #39624November 2, 2022 at 12:20 am #39625November 3, 2022 at 3:44 am #39626 -
This reply was modified 2 years, 11 months ago by
-
AuthorPosts
You must be logged in to reply to this topic.