[Desynthesis] Fieldcraft 2 Demimateria

Forum Forums Grids and Presets [Desynthesis] Fieldcraft 2 Demimateria

This topic contains 1 reply, has 1 voice, and was last updated by Lyfox Lyfox 6 years, 3 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #6083
    Lyfox
    Lyfox
    Participant
    2+

    This scenario farms Fieldcraft 2 Demi out of thin air. I find Aetheryte Ring to be the best method for this. You always get either a demimateria or a nugget which can be recycled and desynthesized again thus resulting in a non-waste production.
    So here goes. It will farm the necessary mats, craft a bunch of rings, desynth them, and recycle the nuggets until nothing but Demi left. Mats not included in scenario:

    – Copper Ore (need ~10 per hour)
    – Wind Crystal (need ~30 per hour)

    Imo they are cheap enough to buy from NPC / market board.
    Requirements:

    – MIN/BTN 50
    – GSM 50
    – GSM desynthesis at least 40. You can probably start from 30 if you dont mind about 50% rate at the beginning.

    Its also a good way to level GSM desynth to something 80+ and from there you can start farming Demi 3.
    Id recommend to edit chapter 4 and replace return() with navigation to your favourite crafting spot. Also repeatAll() in the last chapter is set to 0 – put here your preferred farm cycles. One scenario cycle is 70 min because of gold ore respawn timer.

    If you dont care about gil you can buy all mats from MB and run immediately from chapter 4 or 5.
    Chapter 1 = gather 15+ water clusters.
    Chapter 2 = gather 15+ water clusters.
    Chapter 3 = gather 25 gold ore (30 with Endless Toil).
    Chapter 4 = crafting rose gold nuggets.
    Chapter 5 = crafting and desynthing rings.

    Attachments:
    You must be logged in to view attached files.
    #6085
    Lyfox
    Lyfox
    Participant
    1+

    If you play non-english client you will need translated recipe names so here they are. Import one of these for your language + the file above.

    Attachments:
    You must be logged in to view attached files.
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.