Forum › Forums › Discussion › Crafter Solver Settings.
This topic contains 5 replies, has 2 voices, and was last updated by LutBot 6 years, 3 months ago.
-
AuthorPosts
-
July 28, 2018 at 4:38 pm #7626
So been having issues with miqobot crafter solver settings. Current stats are 1740/1761/492 w/o food: https://gyazo.com/d03b78c0a9a3e534cd1bbeab3c7c1f6c
Using these settings: https://gyazo.com/58e2d2d4da2eea070b41da5ddc7ed7b1
And this is what miqobot comes up with… nowhere near enough to HQ the recipe. It confuses me why it likes to spam some of the buffs back to back (ingenuity II, SH II), uses reflect way too late to be the most efficient, etc. Maybe its something on my settings? My hotbars are all loaded with the basic macro skills, no hasty/hasty II/patient touch: https://gyazo.com/d874e7ea9c32cc736c5374d912d23a6c
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Solver DONE: 15585.5494320988 ms Step 1. Recommended skill: (Initial Preparations) Step 2. Recommended skill: (Comfort Zone) Step 3. Recommended skill: (Inner Quiet) Step 4. Recommended skill: (Ingenuity II) Step 5. Recommended skill: (Steady Hand II) Step 6. Recommended skill: (Piece by Piece) Step 7. Recommended skill: (Rapid Synthesis II) Step 8. Recommended skill: (Rapid Synthesis II) Step 9. Recommended skill: (Prudent Touch) Step 10. Recommended skill: (Prudent Touch) Step 11. Recommended skill: (Tricks of the Trade) Step 12. Recommended skill: (Great Strides) Step 13. Recommended skill: (Ingenuity II) Step 14. Recommended skill: (Steady Hand II) Step 15. Recommended skill: (Prudent Touch) Step 16. Recommended skill: (Specialty: Reflect) Step 17. Recommended skill: (Prudent Touch) Step 18. Recommended skill: (Tricks of the Trade) Step 19. Recommended skill: (Ingenuity II) Step 20. Recommended skill: (Great Strides) Step 21. Recommended skill: (Steady Hand II) Step 22. Recommended skill: (Ingenuity II) Step 23. Recommended skill: (Great Strides) Step 24. Recommended skill: (Steady Hand II) Step 25. Recommended skill: (Steady Hand II) Step 26. Recommended skill: (Byregot's Blessing) Step 27. Recommended skill: (Careful Synthesis III)
Idk ,just trying to figure it out. Any help/insight is very welcome, thanks!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Solver DONE: 3063.08543209877 ms Step 1. Recommended skill: (Initial Preparations) Step 2. Recommended skill: (Comfort Zone) Step 3. Recommended skill: (Inner Quiet) Step 4. Recommended skill: (Steady Hand II) Step 5. Recommended skill: (Piece by Piece) Step 6. Recommended skill: (Rapid Synthesis II) Step 7. Recommended skill: (Steady Hand II) Step 8. Recommended skill: (Steady Hand II) Step 9. Recommended skill: (Rapid Synthesis II) Step 10. Recommended skill: (Tricks of the Trade) Step 11. Recommended skill: (Steady Hand II) Step 12. Recommended skill: (Steady Hand II) Step 13. Recommended skill: (Tricks of the Trade) Step 14. Recommended skill: (Steady Hand II) Step 15. Recommended skill: (Steady Hand II) Step 16. Recommended skill: (Steady Hand II) Step 17. Recommended skill: (Tricks of the Trade) Step 18. Recommended skill: (Steady Hand II) Step 19. Recommended skill: (Steady Hand II) Step 20. Recommended skill: (Steady Hand II) Step 21. Recommended skill: (Careful Synthesis III) Step 22. Recommended skill: (Specialty: Reflect) Step 23. Recommended skill: (Prudent Touch) Step 24. Recommended skill: (Prudent Touch) Step 25. Recommended skill: (Great Strides) Step 26. Recommended skill: (Tricks of the Trade) Step 27. Recommended skill: (Steady Hand II) Step 28. Recommended skill: (Prudent Touch) Step 29. Recommended skill: (Great Strides) Step 30. Recommended skill: (Steady Hand II) Step 31. Recommended skill: (Byregot's Blessing) Step 32. Recommended skill: (Careful Synthesis III) SUCCESS
Here’s the next attempt.. literally spammed Steady II until it ran out of CP LOL Surely there’s something Im missing.
- This topic was modified 6 years, 3 months ago by LutBot.
- This topic was modified 6 years, 3 months ago by LutBot.
- This topic was modified 6 years, 3 months ago by LutBot.
- This topic was modified 6 years, 3 months ago by LutBot.
- This topic was modified 6 years, 3 months ago by LutBot.
- This topic was modified 6 years, 3 months ago by LutBot.
July 28, 2018 at 7:33 pm #7636Ok now i can see your problem. Youre missing a lot of important skills.
– First of all you need Masters Mend and Masters Mend 2. You disabled Manipulation in settings and you dont have any durability restoring skills. Since Miqo has no way to spend CP on durability she simply tries to bait good conditions with buffs on a few steps you gave her. So put MM and MM2 on hotbar.
– Verify that you have CS2 enabled in cross skills. Though i think Miqo shows a warning if you dont so this one shouldnt be an issue.Gonna check Stormblood Stage 2 thread for math and come back.
July 28, 2018 at 7:36 pm #7637July 28, 2018 at 7:53 pm #7638– About specialties. Why do you remove Reinforce and Refurbish? According to Miqo team Reflect is the worst of three: https://miqobot.com/forum/forums/topic/stormblood-upgrade-stage-2/#post-5557
IP + Reinforce (25 Dur): 15.1% IP + Refurbish (65 CP): 12.4% IP + Reflect (3 IQ): 10.6%
And they dont have to be popped at start which gets you more bonus CP from IP.
– Patient Touch is extremely op.
Patient Touch: 41.5%
Dont be afraid of it. Better to use Reclaim when things go bad (10% fail) than neglect Patient Touch potential (41% HQ).
– Have you tried Makers Mark + Flawless?
Maker's Mark: 26.6%
Its takes more steps than IP but do you really care about that extra minute? Youre crafting with bot anyway.
These are the most obvious fixes i see. Try them and see how it goes.July 28, 2018 at 7:56 pm #7639Yeah I disabled MM and MM2 but I have prudent touch and Manip2, I was reading thru the Crafter thread and it seems miqobot doesnt support these skills yet? That might indeed be the issue. I’ll replace those skills and check back. I havent used MM in well over a year or so? Lol.
Everything is already supported. Take a look at sticky thread i linked above it has a detailed analysis for them all.
To use Manip2 you need to enable it in CPU Intensive settings. But Manip2 does not replace MM or MM2.July 28, 2018 at 8:01 pm #7640Yeah I guess Im not completely used to using the bot at all. I removed the refurb and reinforce because I’ve never used them, so basically I just set the skills on my hotbar that I normally use with my macros and hoped miqo would use those instead. I ended up making a scenario with a macro of my making instead and using that to craft overnight. Never liked Maker’s Marks and I tend to avoid it like the plague. Same for patient touch, I hate RNG skills since I have terrible luck with anything that invloves RNG.
Maybe I’ll set up a hotbar with all the skills available and watch what miqo does with them.
Anyways, thanks for the feedback!
-
AuthorPosts
You must be logged in to reply to this topic.