Forum › Forums › Grids and Presets › Gatherer 60-70 Collectable Scenario
Tagged: Collectibles, gathering, Scenario
This topic contains 37 replies, has 11 voices, and was last updated by evaunit01berserk 7 years, 5 months ago.
-
AuthorPosts
-
June 27, 2017 at 8:52 am #3818
Scenario for farming MIN/BOT collectibles for easy leveling 60-70, or a great way to farm red scripts.
Uses 4 nodes each with navigation routes; Beech Branch, Bamboo Shoot, Raw Star Spinel and Raw Triphane.
**IMPORTANT PLEASE READ**
I had max melded ironwork’s gathering gear going into level 61 and above, so if you try out the pre-loaded rotation and it
doesn’t work well for you please change it to something that would better fit your stats, but to my knowledge lower stats should be able to use it just fine.
The pre-loaded rotation uses 650GP, though that is with an added Field Mastery 1 at the beginning. If you have only 600GP you should remove that initial action from the macro, and likewise if you have 700GP or above you can use Field Mastery 2 instead.
At the beginning of chapters 1, 4, 5 and 8 there is the line “sendKey(ctrl+=, 1.5)”, on my hotbar this is what I assign Cordials to. **PLEASE CHANGE THIS LINE TO WHATEVER YOUR CORDIAL KEY IS, THEY ARE REQUIRED FOR NODES 2 HOURS APART**If there are any problems or issues with the scenario please let me know!! <3
Happy Gathering :3June 27, 2017 at 1:25 pm #3822Where is the collectible rotation? I don’t see it included, or I did something wrong. It works great taking you to all the nodes, but it never starts the collectible rotation.
I did not have all my abilities setup on my bars, it is now working correctly. I will test it out and report back.
- This reply was modified 7 years, 6 months ago by DMaxx.
June 27, 2017 at 2:20 pm #3824June 27, 2017 at 2:48 pm #3825June 27, 2017 at 3:47 pm #3829Thank you for trying it out 🙂 so chapter 4 and 8 both go to the same node for “raw star spinel” in the ruby sea, you can find the item under the 61-65 Mining section of your gathering log. Is your miner level 60 and not 61? That’s the only reason I can think of for you not being able to detect the node. As for being fully automated, the scenario does that on its own, check miqobot and see if your getting any errors when it tries to teleport, you may not have it on your hotbar. As I am typing this the scenario is working fine for me, gathered 4 raw star spinel collectables before teleporting to the fringes for the next node.
June 27, 2017 at 6:36 pm #3843Thank you for your work : ) I really appreciate it, We are doing PotD right now, but when I’m done I’ll check it out again. It would finish the node and just stand there, and I have to hit the next button. I managed to collect a lot of red scripts though, so thank you. I wish more people would post such awesome scenarios!
June 27, 2017 at 6:44 pm #3844June 27, 2017 at 8:16 pm #3847June 27, 2017 at 8:38 pm #3848Yeah, it’s still not continuing for me. I just got done with number 3 and it would not start 4. I have to manually hit next to get it to go to the next scenario. Is there a setting to make the bot go to the next step? Also, I’m using 1.2631
(4:30:36 PM) Using action: (Finish)
(4:30:37 PM) Hitting that poor node. :3
(4:30:45 PM) Hitting that poor node. :3
(4:30:51 PM) My precious shiny sparkles! (1/2000)
(4:30:51 PM) Nom-nom a 300 GP coridal :3
(4:30:52 PM) Scanning for shiny gathering nodes like ‘Lv65 Unspoiled Mature Tree’ *.*June 27, 2017 at 8:48 pm #3849June 27, 2017 at 8:48 pm #3850June 27, 2017 at 8:55 pm #3851Ok, I will try the above advice. It always stops here. (4:54:07 PM) Scanning for shiny gathering nodes like ‘Lv60 Unspoiled Mature Tree’ *.*
(4:51:30 PM) I am ‘Botanist’ now! :3
(4:51:31 PM) AFK until: 18:05et (73 seconds)
(4:52:44 PM) Gathering started.
(4:52:44 PM) Max gather count: 2000
(4:52:44 PM) Scanning for shiny gathering nodes like ‘Lv60 Unspoiled Mature Tree’ *.*
(4:52:45 PM) I sense something far away (-486, -168). I want to go take a look!
(4:52:45 PM) Going from 4 to 16 in 6 trips.
(4:52:46 PM) 6 trips more..
(4:52:52 PM) 5 trips more..
(4:53:01 PM) 4 trips more..
(4:53:03 PM) 3 trips more..
(4:53:09 PM) 2 trips more..
(4:53:17 PM) 1 trip more..
(4:53:17 PM) Destination reached!
(4:53:17 PM) Scanning for shiny gathering nodes like ‘Lv60 Unspoiled Mature Tree’ *.*
(4:53:17 PM) I see a shiny node at (-486.177887, -168.813797, 79.903900).
(4:53:17 PM) Going from 16 to 16 in 1 trips.
(4:53:17 PM) 1 trip more..
(4:53:17 PM) Destination reached!
(4:53:19 PM) Selecting slot -> 3
(4:53:20 PM) Using action: (Start)
(4:53:20 PM) Using action: (Clear Out of Reach)
(4:53:24 PM) Using action: (Collect)
(4:53:25 PM) Using action: (Single Mind)
(4:53:30 PM) Using action: (Utmost Caution)
(4:53:32 PM) Using action: (Impulsive Appraisal)
(4:53:36 PM) Evaluating condition: (If DE Procs) – No 🙁
(4:53:36 PM) Using action: (Impulsive Appraisal)
(4:53:40 PM) Evaluating condition: (If DE Procs) – Yes!
(4:53:40 PM) Using action: (Impulsive Appraisal)
(4:53:44 PM) Evaluating condition: (If DE Procs) – Yes!
(4:53:44 PM) Using action: (Single Mind)
(4:53:46 PM) Using action: (Methodical Appraisal)
(4:53:50 PM) Using action: (Finish)
(4:53:51 PM) Hitting that poor node. :3
(4:53:59 PM) Hitting that poor node. :3
(4:54:07 PM) My precious shiny sparkles! (1/2000)
(4:54:07 PM) Nom-nom a 300 GP coridal :3
(4:54:07 PM) Scanning for shiny gathering nodes like ‘Lv60 Unspoiled Mature Tree’ *.*June 27, 2017 at 9:07 pm #3857Had the same problem, make sure your count in the gathering tab is set to 1 instead of something like 999. This will complete the gathering task and move to the next chapter.
This is exactly what it was, I had it set to 2000 : ) Thank you!
I need to level my miner up to 61 so I can see the nodes!
- This reply was modified 7 years, 6 months ago by DMaxx.
June 27, 2017 at 10:02 pm #3862June 27, 2017 at 10:04 pm #3864Glad to see everything is working for you guys when I add the new nodes I’ll be sure to have the scenario set it to only gather 1 node by default so no one else has this problem, I thought that was saved in the gathering presets lol.
Once again, thank you for your work! I can’t wait for the updates : )
-
AuthorPosts
You must be logged in to reply to this topic.