Sky Steel Hatchet Mats

Forum › Forums › Grids and Presets › Sky Steel Hatchet Mats

Tagged: 

This topic contains 6 replies, has 5 voices, and was last updated by  Gunnerknight 3 years, 3 months ago.

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • April 8, 2020 at 3:58 am #21389

    Smilijan
    Participant
    4+

    Put together the first turns ins for the SkySteel Hatchet. Will have to fly to The Dravanian Forelands. Credit to Relecade for the rotation as I just use the one he had for the MIN. Will upload the next set tomorrow.

    Attachments:
    You must be logged in to view attached files.
    April 8, 2020 at 11:30 am #21398

    shlez
    Participant
    0

    works perfect, ty. you got one for part 2 as well?

    April 8, 2020 at 11:58 pm #21414

    Smilijan
    Participant
    4+

    Here is a grid for the 2 turnins. It is in The Churning Mists. I did not use a macro this time. So make sure you set it up as you see fit. Enjoy

    Attachments:
    You must be logged in to view attached files.
    June 10, 2020 at 4:07 pm #22362

    clementxd
    Participant
    0

    hi i tried to use the botoddly2 grid but i keep getting this it reaches the destination but wont gather =o any help would be appreciated to see what is wrong

    Attachments:
    You must be logged in to view attached files.
    June 10, 2020 at 4:21 pm #22363
    LutBot
    LutBot
    Participant
    0
    Smilijan wrote:

    Here is a grid for the 2 turnins. It is in The Churning Mists. I did not use a macro this time. So make sure you set it up as you see fit. Enjoy

    June 10, 2020 at 4:35 pm #22365

    clementxd
    Participant
    0

    yeah i tried to set up using compass and all, sorry im not that smart with these things >.< i set up the rotation and all I dont know what else I have to set up for this macro =o

    July 30, 2021 at 2:32 am #31357

    Gunnerknight
    Participant
    0

    I have a issues were the character gets off the mount at and just runs into a wall till I take over again.

    Edit:Nvm it is working fine now not sure what caused the initial issue.

    • This reply was modified 3 years, 3 months ago by  Gunnerknight.
    • This reply was modified 3 years, 3 months ago by  Gunnerknight.
  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)

You must be logged in to reply to this topic.