Island Sanctuary Clam and Coral

Forum Forums Grids and Presets Island Sanctuary Clam and Coral

This topic contains 7 replies, has 3 voices, and was last updated by Evadude Evadude 2 years, 3 months ago.

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • #38697
    Evadude
    Evadude
    Participant
    0

    Hello all, attached you will find 2 Grids and Scenarios for Island Clam and Island Coral. Before you start these, you have to be submerged and at the starting spot before running the scenario. I will attach photos for reference in another comment in this thread.

    Remember to set your mode to Gather before running the scenario

    Attachments:
    You must be logged in to view attached files.
    #38702
    Evadude
    Evadude
    Participant
    0

    Photos as reference of where to have your character before running scenario.

    Attachments:
    You must be logged in to view attached files.
    #38733
    Evadude
    Evadude
    Participant
    0

    here are my keybinds

    Attachments:
    You must be logged in to view attached files.
    #38901
    rozenstrahl
    rozenstrahl
    Participant
    0

    Tested both North and East Streams, works well without errors. Thank you!

    #38929
    Evadude
    Evadude
    Participant
    0

    Im gonna try and make an updated version.

    #38980

    ffxivblusucks
    Participant
    1+

    Photos as reference of where to have your character before running scenario.

    I dont know if people say it much, but THANK YOU for these! 🙂
    Err was supposed to be for the post above that one. lol

    • This reply was modified 2 years, 3 months ago by  ffxivblusucks.
    #39010
    Evadude
    Evadude
    Participant
    0

    No problem! let me know if you run into any issues.

    #39061
    Evadude
    Evadude
    Participant
    0

    PSA

    For some folks and myself the texts in the scenario chapters run fine, but its come to my attention that Miqo may run differently for others. Here’s a possible way to resolve it an addition to the other info I’ve provided previously.

    Change any text like this:

    waypoint(1)
    gather()
    gather()
    gather()

    To this:
    waypoint(1)
    gather(3)

    Attached is a picture showing a full example of how the text should look.

    Attachments:
    You must be logged in to view attached files.
Viewing 8 posts - 1 through 8 (of 8 total)

You must be logged in to reply to this topic.