grid waypoints change their number

Forum Forums Discussion grid waypoints change their number

This topic contains 2 replies, has 3 voices, and was last updated by Lyfox Lyfox 2 years, 3 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #38961

    vega
    Participant
    0

    Anyone know how or why this happens?

    I either pick up a waypoint and change it or if anything i delete the newest waypoints. But for some reason the older waypoints i set up in the grid get all mixed up in terms of Number. Which makes the scenarios referring to waypoints not usable and i have to redo every step.

    #38962
    Evadude
    Evadude
    Participant
    0

    The basic answer to this, is that when you remove/delete a waypoint it forces the existing waypoints you have to renumber themselves. Moving a waypoint is fine and doesn’t do anything but removing one that’s in the middle of the sequence will cause them to renumber.

    #38963
    Lyfox
    Lyfox
    Participant
    0

    Waypoint numbers are not some static global names. They are just numbers in a sequence. You cant have a sequence of 1,2,10,11 without numbers in between.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.