Grid halp please

Forum › Forums › Discussion › Grid halp please

This topic contains 2 replies, has 3 voices, and was last updated by Lyfox Lyfox 5 years, 4 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • July 9, 2019 at 2:26 am #14589

    whyyme
    Participant
    0

    So I’m Slowly working at a big Grid for my needs in lakeland, but im running into a snag, I made a grid for all of the Spear fishing area, but it keeps bouncing between two diffrent areas. Is their anyway to keep it from going from going up to WP 71 and from there to 72 and from there to the other Area in the same grid?

    July 9, 2019 at 3:48 am #14593

    Kim_Lee
    Participant
    0

    You need a beacon and this post is in the wrong section. Please post here for more help https://miqobot.com/forum/forums/forum/grids-and-presets/

    July 9, 2019 at 7:02 am #14604
    Lyfox
    Lyfox
    Participant
    1+

    Split your grid in two. One of the rules that Miqo follows is never go beyond the area defined by the grid. By making a single grid for two areas you basically discard that rule.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.