Gathering in reverse?

Forum Forums Discussion Gathering in reverse?

This topic contains 2 replies, has 2 voices, and was last updated by  feefee 2 years, 11 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #34840

    feefee
    Participant
    0

    I made a grid using beacons after getting used to them and preferring them over compass grids, but out of nowhere this grid I made has Miqo start in reverse order of beacons and start from the highest number (beacon 27) instead of lowest number (beacon 23). Is there a reason this happens only on this grid I made?

    Attachments:
    You must be logged in to view attached files.
    #34842

    Uxhak
    Participant
    0

    I’m pretty sure the beacons start from the closest to your start point and the numbers of the waypoint dont actually matter. So if your scenario or the place you start the gathering is closer to beacon 27 it will start there. The numbers on the waypoints dont really matter anyways as they are mainly for the Waypoint() command in scenario otherwise the movement/flight order just goes with the closest/fastest route.

    #34844

    feefee
    Participant
    0

    Oh okay. I’ll just let it be with this grid then.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.