Dawntrail 7.0 Gathering Grids

[LornelthParticipant]

I’d like to add my thanks to the work you put into these grids, and for sharing them with all of us. Wanted to see if you’d done one for Ginseng Logs.

Luck!

[CaffeinatedGremlinParticipant]

@Scientia

Hey there! Apparently, I put together grids for pretty much everything else- including the requested Turali Corn grid, about a day or two after you posted this request. I simply forgot to post them. ^_^;

To be fair, I had a few health issues crop up (including an emergency surgery) around that time, and a lot of things got set aside and forgotten. Lol.

Anyway, here’s the Turali Corn Grid for you.

As a heads up, I probably need to go back through all my DT grids and check them over, since I’m seeing messages in this thread from December, about issues with a couple of other grids I posted. So, if you find any issues with the Turali Corn grid, please let me know, and I’ll make sure to take a closer look at it.

• This reply was modified 2 months, 3 weeks ago by  CaffeinatedGremlin.
• This reply was modified 2 months, 3 weeks ago by  CaffeinatedGremlin.

Attachments:

You must be logged in to view attached files.

[CaffeinatedGremlinParticipant]

@lornelth, I have your Ginseng Log grid right here~. (heads up/disclaimer from the post I just made a minute ago, above this one, applies here, as well.)

Attachments:

You must be logged in to view attached files.

[CaffeinatedGremlinParticipant]

The best way to reach me is honestly by pinging me in the Miqobot Discord w/ @caffeinatedgremlin, since I have periods of forgetting to check the forum site, every now and then. ^_^;

[CaffeinatedGremlinParticipant]

Going to do a dump of all the DT grids I have that I have not yet posted, so folks have something, and then go back through and double-check them for issues.

Here’s the first batch.

Attachments:

You must be logged in to view attached files.

[CaffeinatedGremlinParticipant]

Second batch.

Attachments:

You must be logged in to view attached files.

[CaffeinatedGremlinParticipant]

Third batch.

Attachments:

You must be logged in to view attached files.

[KediParticipant]

Heya! I can’t seem to get from the Beacon to Node 24, although it doesn’t have any trouble getting from Node 24 back to to the beacon, which is weird 😅 Any ideas/suggestions? Right now I’m manually taking over for just that one stage to get from 16 to 24. (In case this doesn’t reply to the original message, I’m referring to the White Pepper preset!)

• This reply was modified 2 months, 2 weeks ago by  Kedi.

[megamanx77Participant]

Hiya, these are coming in late but for the sake of completeness, I’ve made grids for legendary 7.0/7.1 nodes. Each grid has redundant waypoints around the beacon for goToRandomWaypoint() use to make it less obvious to other players running the legendary gather loop. See grid description for more details.

Attachments:

You must be logged in to view attached files.

[megamanx77Participant]

Part two

Attachments:

You must be logged in to view attached files.

[megamanx77Participant]

7.2 Legendary grids, redundant nodes added around the beacon for goToRandomWaypoint() use. Check description for more details. The Cordia Log one may have issues, when running the loop the far north node never got proc’d so I’m not sure if Miqo will have trouble reaching it.

Attachments:

You must be logged in to view attached files.

[megamanx77Participant]

part 2

Attachments:

You must be logged in to view attached files.

[Cherpa CherpaParticipant]

I am having issues with Cordia Log as well on my personal grid I built. Every so often, the bot will go to the northern most node even when it spawns at one of the other two nodes. It wont backtrack to the correct node or trip the kill switch though, just keeps looking in a loop. Very strange.

[marctParticipant]

Might be slightly out of focus for this but has anyone created a scenario yet for 7.0 gathering?

[edgedyParticipant]

Thanks for all the work! Could you make a legendary scenario which hits all of the nodes?

[Author]

Posts