Random Snippets (Materia Extraction, Scrap Turn-Ins, Quick-Synth)

[dermParticipant]

I decided to share some of the random snippets i use because some people can probably use them.
Also i hope some of you could do the same so we can all improve our Scenarios 🙂

Materia Extraction

key(< ,1.5) // Hotkey for the Materia Extraction Button from Actions & Traits > General

Key(num4 ,0.2) // num4 = left, first press to activate the menu, a left input wont change anything

key(num0 ,0.2) // num0 = accept - select the item
Key(num4 ,0.2) // select extract button
key(num0 ,4) // extract, 4 seconds break

key(num0 ,0.2)
Key(num4 ,0.2)
key(num0 ,4)

key(num0 ,0.2)
Key(num4 ,0.2)
key(num0 ,4)

key(num0 ,0.2)
Key(num4 ,0.2)
key(num0 ,4)

key(num0 ,0.2)
Key(num4 ,0.2)
key(num0 ,4)

key(num0 ,0.2)
Key(num4 ,0.2)
key(num0 ,4)

key(< ,1)

// close the Materia-Extraction menu

This is based on the Materia Extraction V4 from the Scenarios Thread.
As you can see this extracts 6 items and takes about 15 ingame minutes. You can put as many of the extraction blocks in there just dont forget to activate the menu at the beginning so it wont break.
The 4 second delay can be adjusted down, but i just always like to be certain it doesnt randomly break if my internet lags for a second.

Yellow Scrap Item Turn-In -> buy Hi-Cordials

So i wanted to paste the full chapter in here but its just too long. Ill attach it to this post.
It does require an edited version of the Eulmore Scrips & Mender Navigation but i saved it under a different name so nobody overwrites their old one.

This is the Turn-In chapter i use for Yellow Scrip items, specifically: Russet Popoto (BTN), Broad Beans (BTN), White Oak Branch (BTN) and Raw Triplite (MIN), Raw Diaspore (MIN), Raw Hematite (MIN).
Its in 4 steps, 1) turn in BTN items 2) exchange those for hi-cordial 3) turn in MIN items 4) exchange those for hi-cordial. I split it up because for me 1 ingame day results in around 1500 of each which would make the script less efficient since you’d break the 2000 cap within the 2nd Turn-In.
Im not posting the whole scenario because its a mish-mash of different edited Yellow Scrip scenarios of the forums and i cant remember whose is whose so i cant give credit and i also cba to edit all of those navs so nobody destroys anything previously imported.
As of right now (26th of September) this works perfectly for me. It can be altered to basically every Gatherer/Crafter Scrip Turn-In / Exchange you want. You just need to figure out how to use the up/down/tab keys to get to the item you want and follow the examples i gave. Everything should be at least semi well commented.
The version ive uploaded takes about 60 ingame minutes to complete.

Ill post an example of a Turn-In and the buying of Hi-Cordials below so you can see how it works before downloading.

// turnin
//
waypoint(10) // appraiser
job(BTN)

// npc reset ** needed for npc swaps (appraiser -> exchange) or first contact with npc
sendKey(F12, 1) // select the closest NPC - bind in options
sendKey(NUM0, 1.5) // num0 = accept - activate the npc 
sendKey(NUM2, 0.1) // num2 = down - random input
sendKey(NUM., 0.3) // num. = close menu - bind in options iirc, might be standard

sendKey(F12, 1) // select the closest NPC
sendKey(NUM0, 1.5) // activate the npc
// down 7, sell Russet Popoto
sendKey(NUM2, 0.1)
sendKey(NUM2, 0.1)
sendKey(NUM2, 0.1)
sendKey(NUM2, 0.1)
sendKey(NUM2, 0.1)
sendKey(NUM2, 0.1)
sendKey(NUM2, 0.1)
sendKey(NUM0, 0.1) // to Trade button
sendKey(NUM0, 0.1) // lots of sell inputs
sendKey(NUM0, 0.1)
sendKey(NUM0, 0.1)
sendKey(NUM0, 0.1)
sendKey(NUM0, 0.1)
sendKey(NUM0, 0.1)
sendKey(NUM0, 0.1)
sendKey(NUM0, 0.1)
sendKey(NUM0, 0.1)
sendKey(NUM0, 0.1)
sendKey(NUM0, 0.1)
sendKey(NUM0, 0.1)
sendKey(NUM0, 0.1)
sendKey(NUM0, 0.1)
sendKey(NUM0, 0.1)
sendKey(NUM0, 0.1)
sendKey(NUM0, 0.1)
sendKey(NUM0, 0.1)
sendKey(NUM0, 0.1)
sendKey(NUM., 0.3) // close menu, overclosing for reliability
sendKey(NUM., 0.3)
sendKey(NUM., 0.3)

===========

// Buy the Hi-Cordials
//

waypoint(13) // exchange
// npc reset
sendKey(F12, 0.3)
sendKey(NUM0, 1.2)
sendKey(NUM2, 0.1)
sendKey(NUM., 0.3)

sendKey(F12, 0.3) // select the closest NPC
sendKey(NUM0, 1.5) // activate the npc
// make sure the menu is active, send NUM4 (left)
sendKey(NUM4, 0.3)
// downx1 + Gatheres Scrip Exchange
sendKey(NUM2, 0.2)
sendKey(NUM0, 0.7)
// activate menu (NUM4) + Yellow Lv. 50 Items
sendKey(NUM4, 0.3)
sendKey(NUM0, 1.5)

// swap tabs and select max amount
sendKey(NUM9, 0.1) // NUM9 = tab to the right, standard iirc
sendKey(NUM9, 0.1)
sendKey(NUM6, 0.2) // NUM6 = right, probably standard too
sendKey(NUM9, 0.5) // NUM9 here selects the max amount
sendKey(NUM4, 0.4) // left to hi-cordial

// try to buy hi-cordials
sendKey(NUM0, 0.3) // confirm on hi-cordial
sendKey(NUM4, 0.2) // left to confirm button
sendKey(NUM0, 1.0) // buy
sendKey(NUM., 0.3) // close menu, overclosing for reliability.
sendKey(NUM., 0.3)
sendKey(NUM., 0.3)
sendKey(NUM., 0.3)
sendKey(NUM., 0.3)
sendKey(NUM., 0.3)

Quick-Synth

This uses Quick-Synth for the top item on your favorites list for that job. To adjust it to the 2nd, 3rd item etc you have to input down commands after “confirm on favorites”. You could probably make this work with the search but it took me a second to figure out how to input a search string so i just made it work using favorites.
I think i also started this off of something somebody else posted on the forums but i cant remember who it was. Credit goes to whoever you are, thanks.

job(GSM) // Select the appropriate Job
key(n, 1.5) // crafting log
// reset log to get to favorites
key(num2, 0.1) // num2 = down, random input to activate menu
key(num9, 0.1) // num = next tab - 9x to reset menu on same Job
key(num9, 0.1)
key(num9, 0.1) 
key(num9, 0.1) 
key(num9, 0.1) 
key(num9, 0.1) 
key(num9, 0.1) 
key(num9, 0.1)
key(num9, 0.1)
// down 1 to favorites and move to quick synth
key(num2, 0.2) // down to favorites
key(num0, 0.5) // confirm on favorites
key(num0, 0.5) // confirm on top of favorites list for this Job
key(num4, 0.5) // left to Quick-Synthesis
key(num0, 0.5) // confirm on Quick-Synthesis
// use hq mats, set max and confirm
key(num8, 0.2) // up
key(num0, 0.2) // confirm to use hq
key(num2, 0.2) // down to number box
key(num9, 0.2) // select max stacks
key(num2, 0.2) // down to Synthesize button
key(num0, 1.0) // confirm Synthesis
afkFor(00:05:20) // time to afk before the Quick-Synth is ready, this is for 99 items
sendKey(NUM., 0.3) // close menu - overclosing for reliablity
sendKey(NUM., 0.3)
sendKey(NUM., 0.3)
sendKey(NUM., 0.3)

I tried to comment as much as possible but if something doesnt work feel free to ask for help. Also I havent extensively tested the Quick-Synth in longer Scenarios but the rest should work fine.

[robdobilinaParticipant]

This Quick Synthesis scenario is great, the only thing I would add is repair after afkFor since quick synthesis destroys your gear. Thank you for making this!

[r51093Participant]

there are much simpler ways to do most of what you have scripted out your useing the sendkey() command which is rather frail and unreliable not recommended to use it unless you have no other choice but anyways here are easier and more reliable ways to do most of what you have scripted

Materia Extraction:
startMateriaExtraction()
will extract the materia from currently equiped gear
just a quick scenario

job(Miner)
startMateriaExtraction()

just change miner to what ever job you want to extract Materia from and you can do this for evrey class / job

Yellow / White Script Item Turn-In:
deliverCollectables()

job(botanist)
deliverCollectables()

job(Miner)
deliverCollectables()

same thing as before change job to the items you want to turn in
mining for mining gathering turn in
Goldsmith for goldsmith crafting turn in

Running the above commands is less frail then the sendkey()Miqobot can do it fater then with running a scenario

now the buy Hi-Cordials is good miqobot wont buy things so the script is needed

Quick-Synth:
this is a gray area one lol

i can see why some mite use this for the quick craft option good for under-geared crafting or mass crafting but mostly its more reliable to just setup a crafting scenario like below or to start the quick synthesis your self the sendkey() command is not reliable and can easily be broken

job(goldsmith)

//Food Hotbar 3 slot 1
icon(3, 1, 2)
icon(3, 1, 2)

solverPreset(best quality)
recipe(Grade 4 Artisanal Skybuilders' Astroscope, 6)
craft(1)

//Food Hotbar 3 slot 1
icon(3, 1, 2)
solverPreset(best quality)
recipe(Grade 4 Artisanal Skybuilders' Astroscope, 6)
craft(29)

//Food Hotbar 3 slot 1
icon(3, 1, 2)
icon(3, 1, 2)
solverPreset(best quality)
recipe(Grade 4 Artisanal Skybuilders' Astroscope, 6)
craft(29)

key(num.)
key(num.)
key(num.)
key(num.)
key(num.)

[Author]

Posts